GE PTS25SHS Use and Care Manual - Page 12
Replacing the Light Bulbs
View all GE PTS25SHS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions Replacing the light bulbs. Turning the control to the 0 (off) position does not remove power to the light circuit. Refrigerator Compartment CAUTION: Light bulbs may be hot. Unplug the refrigerator. The bulbs are located at the top of the refrigerator compartment near the opening. On some models, a light shield will have to be removed. To remove the light shield, grasp the shield as shown. Squeeze the shield and rotate the shield toward the back of the refrigerator. The light shield will pop out. Replace the bulb with an appliance bulb of the same or lower wattage. On models with a light shield, replace the light shield. Plug the refrigerator back in. Freezer Compartment Light (on some models) Light shield CAUTION: Light bulbs may be hot. Unplug the refrigerator. The bulb is located behind a light shield at the back of the freezer compartment. To remove, squeeze the top and bottom of the shield and pull the shield off. After replacing with an appliance bulb of the same or lower wattage, replace the shield. Plug the refrigerator back in. Freezer Compartment Dome Light (on some models) CAUTION: Light bulbs may be hot. After replacing with an appliance bulb of the same or lower wattage, Pocket Unplug the refrigerator. replace the shield. The bulb is located at the top of the Plug the refrigerator back in. freezer compartment inside the dome light shield. To remove the shield, place your finger in the pocket at the back of the shield. Pull the shield forward and down. Consumer Support 12