Genie SilentMax 1000 Owner's Manual - Page 14

4 Optional Programming INTELLICODE® 1 REMOTES Remotes provided with this unit can operate other (Intellicode® 1) models of Genie® garage door openers .The default Intellicode® 2 setting must be changed to Intellicode® 1. (Follow these same steps to change Intellicode® 1 back to Intellicode® 2.) NOTE: The button directly above the logo on the transmitter is preset to Intellicode® 1. The LED color displayed on the Remote indicates the Intellicode® mode: Red = Intellicode® 1 Green = Intellicode® 2 6 Press the Remote button again. If the door moves, the Remote button is programmed to your opener. If you have questions, see your Genie® instructions for this Intellicode® 1 model of opener. NOTE: Choose the Genie® Remote using Intellicode® 1 button for this activity. All new Remotes have the button directly above the logo preset to Intellicode® 1. 1 Select a Remote button NOT already programmed to the Powerhead. Press and hold the button for 10 seconds (both the RED and GREEN LEDs on the Remote turn ON). This button is set to Intellicode® 1. 2 Press and release the Remote button 3 times. ***Repeat Step 2 to turn the RED LED on the Remote back to GREEN for operation with Intellicode® 2 openers. Once the LED on the Remote turns RED when the button is pressed, that button is programmed to the Intellicode® 1. 3 Find the Learn Code Button and Learn Code Indicator LED on your older Genie® door opener. If your door opener has a black antenna wire and the serial number does not start with 10 or higher, the Learn Code Button and Indicator LED are located near the antenna. The light lens may need to be opened. If you use an external receiver, it may need to be opened to access the Learn Code Button and Indicator LED. 4 Press the Learn Code Button (the LED on the Opener 5 Press the Remote button 2 times (the LED on the Opener turns OFF). 14