Gigabyte B365M D3V User Manual
Gigabyte B365M D3V Manual
 |
View all Gigabyte B365M D3V manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte B365M D3V manual content summary:
- Gigabyte B365M D3V | User Manual - Page 1
B365M D3V User's Manual Rev. 1001 For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment. - Gigabyte B365M D3V | User Manual - Page 2
B365M D3V Motherboard B365M D3V Jun. 28, 2019 Jun. 28, 2019 Copyright © 2019 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual : "REV: X.X." For example, "REV: 1.0" - Gigabyte B365M D3V | User Manual - Page 3
Table of Contents B365M D3V Motherboard Layout 4 Chapter 1 Hardware Installation 5 1-1 Installation Precautions 5 1-2 Product Specifications 6 1-3 Installing the CPU 9 1-4 Installing the Memory 9 1-5 Installing an Expansion Card 10 1-6 Back Panel Connectors 10 1-7 Internal - Gigabyte B365M D3V | User Manual - Page 4
PCI CODEC BAT PCIe to PCI Bridge Intel® B365 F_USB1 F_PANEL COM F_AUDIO TPM F_USB2 CLR_CMOS Box Contents 55 B365M D3V Motherboard 55 Motherboard driver disk 55 User's Manual 55 Two SATA cables 55 I/O Shield * The box contents above are for reference only and the actual items shall - Gigabyte B365M D3V | User Manual - Page 5
(ESD). Prior to installation, carefully read the user's manual and follow these procedures: •• Prior to installation, make sure the user. •• If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician. - Gigabyte B365M D3V | User Manual - Page 6
Express 3.0 standard.) 1 x PCI slot Chipset: - 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2 SSD support) - 6 x SATA 6Gb/s connectors - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and - Gigabyte B365M D3V | User Manual - Page 7
Controller Chip ŠŠ Voltage detection ŠŠ Temperature detection ŠŠ Fan speed detection ŠŠ Overheating warning ŠŠ Fan fail warning ŠŠ Fan speed control * Whether the fan speed control function is supported will depend on the cooler you install. ŠŠ 2 x 128 Mbit flash ŠŠ Use of licensed AMI UEFI BIOS - Gigabyte B365M D3V | User Manual - Page 8
- Game Boost - ON/OFF Charge - Platform Power Management - RGB Fusion - Smart Backup - Smart Keyboard - Smart Survey - System Information Viewer - USB Blocker Support for Q-Flash Support for Xpress Install Norton® Internet Security (OEM version) Realtek® 8118 Gaming LAN Bandwidth Control Utility - Gigabyte B365M D3V | User Manual - Page 9
the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to - Gigabyte B365M D3V | User Manual - Page 10
Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: •• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. •• Always turn off the computer and unplug the power cord from the power - Gigabyte B365M D3V | User Manual - Page 11
USB 3.1 Gen 1 Port The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0 specification. Use this port for USB devices. RJ-45 LAN Port The Gigabit Ethernet LAN - Gigabyte B365M D3V | User Manual - Page 12
1-7 Internal Connectors 41 6 13 3 2 5 9 8 11 12 10 14 7 1) ATX_12V_2X4 2) ATX 3) CPU_FAN 4) SYS_FAN 5) SATA3 0/1/2/3/4/5 6) M2A 7) F_PANEL 8) F_AUDIO 9) F_USB30 10) F_USB1/F_USB2 11) COM 12) TPM 13) BAT 14) CLR_CMOS Read the following guidelines before connecting external devices: •• First - Gigabyte B365M D3V | User Manual - Page 13
1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all - Gigabyte B365M D3V | User Manual - Page 14
and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel® Chipset supports RAID 0, RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. 77 SATA3 25 14 03 Pin No - Gigabyte B365M D3V | User Manual - Page 15
SSDs and support RAID configuration. Please note that an M.2 PCIe SSD cannot be used to create a RAID set either with a SATA hard drive. To create a RAID array with an M.2 PCIe SSD, you must set up the configuration in UEFI BIOS mode. Refer to Chapter 3, "Configuring a RAID Set," for instructions on - Gigabyte B365M D3V | User Manual - Page 16
by issuing a beep code. One single short beep will be heard if no problem is detected at system startup. •• HD (Hard Drive Activity LED): Connects to 8) F_AUDIO (Front Panel Audio Header) The front panel audio header supports High Definition audio (HD). You may connect your chassis front panel - Gigabyte B365M D3V | User Manual - Page 17
F_USB30 9) F_USB30 (USB 3.1 GenF1_ UHeader) F_ The header conforms to USB 3.1 Gen 1 and USB 2.0 specification and can provide two USB ports. For purchasing the optional 3.5" front panel that provides two USB 3.1 Gen 1 ports, please contact the local dealer. Pin No. Definition Pin No. - Gigabyte B365M D3V | User Manual - Page 18
from the power outlet before clearing the CMOS values. •• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). - 18 - - Gigabyte B365M D3V | User Manual - Page 19
and downloads the latest version of BIOS from the Internet and updates the BIOS. •• Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS - Gigabyte B365M D3V | User Manual - Page 20
2-2 The Main Menu Setup Menus System Time Hardware Information Configuration Items Current Settings Quick Access Bar allows you to enter Easy Mode, select BIOS default language, configure fan settings, or enter Q-Flash. Classic Setup Function Keys Move the selection bar to select a setup - Gigabyte B365M D3V | User Manual - Page 21
are synchronous to those under the same items on the Advanced Frequency Settings menu. (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website. - 21 - - Gigabyte B365M D3V | User Manual - Page 22
The C6/C7 state is a more enhanced power-saving state than C3. Auto lets the BIOS automatically configure this setting. (Default: Auto) && C8 State Support (Note) Allows you to determine whether to let the CPU enter C8 mode in system halt state. When enabled, the CPU core frequency and voltage - Gigabyte B365M D3V | User Manual - Page 23
you to determine whether to enable hardware prefetcher to prefetch data and instructions from the memory into the cache. (Default: Auto) && Allows you to manually adjust the memory reference clock. (Default: Auto) (Note 1) This item is present only when you install a CPU that supports this feature. - Gigabyte B365M D3V | User Manual - Page 24
, and memory timing settings below to be configurable. Options are: Auto (default), Manual, Advanced Manual. && Profile DDR Voltage When using a non-XMP memory module or Extreme Memory Profile This item is present only when you install a CPU and a memory module that support this feature. - 24 - - Gigabyte B365M D3V | User Manual - Page 25
memory timing settings for each channel of memory. The respective timing setting screens are configurable only when Memory Timing Mode is set to Manual or Advanced Manual. Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset - Gigabyte B365M D3V | User Manual - Page 26
&& Fan Control Use Temperature Input Allows you to select the reference temperature for fan speed control. && Temperature Interval Allows you to select the temperature interval for fan speed change. && Fan Control Mode Auto Lets the BIOS automatically detect the type of fan installed and sets - Gigabyte B365M D3V | User Manual - Page 27
System This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time. && Access Level Displays the current access level depending on the type of password protection used. (If no password is set - Gigabyte B365M D3V | User Manual - Page 28
Drive/Network Device BBS Priorities Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives, and devices that support Boot from LAN function, etc. Press on this item to enter the submenu that presents the devices of the same type that are - Gigabyte B365M D3V | User Manual - Page 29
the operating system and during the POST. (Default) This item is configurable only when Fast Boot is set to Enabled or Ultra Fast. && VGA Support Allows you to select which type of operating system to boot. Auto Enables legacy option ROM only. EFI Driver Enables EFI option ROM. (Default - Gigabyte B365M D3V | User Manual - Page 30
launch Disables option ROM. Legacy Enables legacy option ROM only. UEFI Enables UEFI option ROM only. (Default) This item is configurable only when CSM Support is set to Enabled. && Other PCI Device Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device - Gigabyte B365M D3V | User Manual - Page 31
up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. && Above 4G Decoding Enables or disables 64-bit to be decoded in above 4 GB address space (only if your system supports 64-bit PCI decoding). Set to Enabled if more than one advanced - Gigabyte B365M D3V | User Manual - Page 32
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled) && Ipv4 PXE Support Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled. && Ipv4 HTTP - Gigabyte B365M D3V | User Manual - Page 33
&& Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && Configured as eSATA Enables or disables support for external SATA devices. && Mechanical Presence Switch Allows you to determine whether to turn on the Mechanical Presence switch for the SATA device - Gigabyte B365M D3V | User Manual - Page 34
item to Disabled. && IOAPIC 24-119 Entries Enables or disables this function. (Default: Enabled) (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's website. - 34 - - Gigabyte B365M D3V | User Manual - Page 35
2-8 Power && Platform Power Management Enables or disables the Active State Power Management function (ASPM). (Default: Disabled) && PEG ASPM Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is configurable only when Platform Power Management is set to - Gigabyte B365M D3V | User Manual - Page 36
&& Power On Password Set the password when Power On By Keyboard is set to Password. Press on this item and set a password with up to 5 characters and then press to accept. To turn on the system, enter the password and press . Note: To cancel the password, press on this - Gigabyte B365M D3V | User Manual - Page 37
2-9 Save & Exit && Save & Exit Setup Press on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press to return to the BIOS Setup Main Menu. && Exit Without Saving Press on this item and select Yes. This exits the BIOS - Gigabyte B365M D3V | User Manual - Page 38
hard drives you use for RAID in the Type tab and then press . 2. Go to the Mode tab to select a RAID level. RAID levels supported include RAID 0, RAID 1, RAID 10, and RAID 5 (the selections available depend on the number of the hard drives being installed). Then press to move - Gigabyte B365M D3V | User Manual - Page 39
this step and proceed with the installation of Windows operating system for a non-RAID configuration. Steps: 1. In BIOS Setup, go to BIOS and set CSM Support to Enabled and Storage Boot Option Control to Legacy. Next, go to Peripherals\SATA And RST Configuration and make sure Use RST Legacy OROM is - Gigabyte B365M D3V | User Manual - Page 40
Click Enable. All data on the Optane™ memory will be erased. Make sure you back up the data before continuing. Follow the on-screen instructions to proceed. When completed, restart the system. 3. Launch the Intel® Optane™ Memory application from the Start menu and make sure the Intel® Optane™ Memory - Gigabyte B365M D3V | User Manual - Page 41
below: 1. After system restarts, go to the BIOS Setup, make sure CSM Support under the BIOS menu is disabled. 2. Go to Peripherals\SATA And RST drive to be accelerated. Click Yes to continue. Follow the on-screen instructions to proceed. When completed, restart the system. 5. Launch the Intel® - Gigabyte B365M D3V | User Manual - Page 42
the arrow icon to individually install the drivers you need. Please visit GIGABYTE's website for more software information. - 42 - Please visit GIGABYTE's website for more troubleshooting information. - Gigabyte B365M D3V | User Manual - Page 43
please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Finally, we - Gigabyte B365M D3V | User Manual - Page 44
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Gigabyte B365M D3V | User Manual - Page 45
: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com WEB address (English): https://www.gigabyte.com WEB address (Chinese): https://www.gigabyte.com/tw •• GIGABYTE
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
 |
 |
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product
are recyclable and reusable. GIGABYTE works with you to protect the environment.
B365M D3V
User's Manual
Rev. 1001