Gigabyte GA-7PESH1 Manual
Gigabyte GA-7PESH1 Manual
 |
View all Gigabyte GA-7PESH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte GA-7PESH1 manual content summary:
- Gigabyte GA-7PESH1 | Manual - Page 1
GA-7PESH1 GA-7PESH2 Dual LGA2011 sockets motherboard for Intel® E5-2600 series processors User's Manual Rev. 1001 - Gigabyte GA-7PESH1 | Manual - Page 2
assist in the use of this product, GIGABYTE provides the following types of documentations: For quick set-up of the product, read the Quick Installation Guide included with the product. For detailed product information, carefully read the User's Manual. For product-related information, check on - Gigabyte GA-7PESH1 | Manual - Page 3
GA-7PESH1/7PESH2 Motherboard Layout 5 Chapter 1 Hardware Installation 8 1-1 Installation Precautions 8 1-2 Product Specifications 9 1-3 Installing the CPU and CPU Cooler 11 1-3-1 Installing the CPU...11 1-3-2 Installing the CPU Cooler 13 1-4 Installing the Memory 14 1-4-1 Four Channel Memory - Gigabyte GA-7PESH1 | Manual - Page 4
Box Contents Motherboard Driver CD Two SATA cables I/O Shield • The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. • The motherboard image is for reference only. - 4 - - Gigabyte GA-7PESH1 | Manual - Page 5
GA-7PESH1/7PESH2 Motherboard Layout 41 42 44 45 47 49 51 1 2 3 4 5 6 43 46 48 50 40 39 38 37 36 35 34 60 52 59 53 54 33 58 32 55 31 30 57 56 29 28 25 24 89 7 10 11 12 13 14 19 18 15 27 26 23 22 21 20 17 16 - 5 - - Gigabyte GA-7PESH1 | Manual - Page 6
GA-7PESH1) USB_MLAN (GA-7PESH2) 3 USB_LAN1 (GA-7PESH1) GLAN1 (GA-7PESH2) 4 USB_LAN2 (GA-7PESH1) GLAN2 (GA-7PESH2) 5 VGA_1 6 COM1 7 P12V_AUX2 8 DDR3_P1_H1 9 DDR3_P1_H0 10 Channel B slot 1 (for primary CPU) CPU0 fan cable connector Intel LGA2011 socket (Primary CPU) Channel D slot 1 (for - Gigabyte GA-7PESH1 | Manual - Page 7
Chassis intrusion jumper Clear password jumper BIOS recovery jumper SATA0 port DOM support jumper SATA1 port DOM support jumper CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed and set to 2-3 pins (Normal mode), in order to reduce any risk - Gigabyte GA-7PESH1 | Manual - Page 8
discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, do not (ESD) wrist strap when handling electronic com- ponents such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, keep your hands dry and first - Gigabyte GA-7PESH1 | Manual - Page 9
35V DDR3L DIMM sockets supporting up to 128 GB of system memory ŠŠ Four channel memory architecture ŠŠ Support for 800/1066/1333/1600 memory modules ŠŠ Support for ECC RDIMM/ UDIMM memory modules LAN ŠŠ Intel® I350 supports 10/100/1000 Mbps (GA-7PESH1) ŠŠ Intel® X540-AT2 supports dual 10G Base - Gigabyte GA-7PESH1 | Manual - Page 10
ŠŠ CPU/System fan speed detection ŠŠ CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. ŠŠ 1 x 64 Mbit flash ŠŠ AMI BIOS ŠŠ EATX Form Factor; 12 inch x 13 inch, 8 layers PCB * GIGABYTE reserves the - Gigabyte GA-7PESH1 | Manual - Page 11
the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) memory, hard drive, etc. 1-3-1 Installing the CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. Pin One Corner of the CPU Socket Alignment Key Alignment Key LGA2011 - Gigabyte GA-7PESH1 | Manual - Page 12
unlock" marking " " (below referred as lever A) down and away from the socket to release it. Step 2: Push the lever closest to the "lock" marking " " ( plate to rise. Open the load plate. (Note: DO NOT touch the socket contacts after the load plate is opened.) Step 4: Hold the CPU with your - Gigabyte GA-7PESH1 | Manual - Page 13
may differ depending the CPU cooler to be used. Refer to the user's manual for your CPU cooler.) Step 1: Apply an even and thin layer of thermal screws with the mounting holes on the ILM. (If your cooler has a fan grill which may cause interference when you tighten the screws, remove it first and - Gigabyte GA-7PESH1 | Manual - Page 14
eight DDR3 memory sockets and supports Four Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Four Channel memory mode will be four times of the original memory bandwidth. The four DDR3 memory sockets are - Gigabyte GA-7PESH1 | Manual - Page 15
on this motherboard. Installation Step: Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down. Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module. Note: For dual-channel operation, DIMMs must be installed in matched pairs. Step - Gigabyte GA-7PESH1 | Manual - Page 16
1-5 Back Panel Connectors GA-7PESH1 GA-7PESH2 Serial Port Connects to serial-based mouse or data of the LAN port LEDs. RJ-45 LAN Port (10 Gigabit Ethernet LAN Port) The 10 Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. The following describes the states of the - Gigabyte GA-7PESH1 | Manual - Page 17
or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring Speed LED Link Activity LED 10/100/1000 LAN Port I350 Speed LED: Link/Activity LED: State Yellow On Yellow Blink Description 1 Gbps data rate Identify 1 Gbps data rate - Gigabyte GA-7PESH1 | Manual - Page 18
13 4 18 3 21 8 1) ATX1 2) P12V_AUX2 3) P12V_AUX1 4) PWR_DET1 5) CPU0_FAN (forprimary CPU) 6) CPU1_FAN (for seconary CPU) 7) SYS_FAN1 (System Fan) 8) SYS_FAN2 (System Fan) 9) SATA0/1 10) FRONT_USB 11) MINII_CN1 5 12) MINII_CN2 13) MINII_CN3 14) BP_1 15) TPM_1 16) F_PANEL1 17) IPMB1 18) SATA_SGPIO - Gigabyte GA-7PESH1 | Manual - Page 19
Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to - Gigabyte GA-7PESH1 | Manual - Page 20
3 GND 15 GND 4 +5V 16 PS_ON 5 GND 17 GND 6 +5V 18 GND 7 GND 19 GND 8 Power Good 20 -5V 9 5VSB (stand by +5V) 21 +5V 10 +12V 22 +5V 12 24 11 +12V 12 3.3V 23 +5V 24 GND HaArTdXw_1a2rVe Installation - 20 - - Gigabyte GA-7PESH1 | Manual - Page 21
black connector wire is the ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis. CPU1_FAN 1 CPU0_FAN 1 CPU1_FAN 1 SYS_FAN2 - Gigabyte GA-7PESH1 | Manual - Page 22
3Gb/s and 1.5Gb/s standard. Each SATA connector supports a single SATA device. When SATA_DOM1/2 jumper are set to Normal Mode: SATA0 SATA1 7 7 1 1 Pin No. number of hard drives must be an even number. • A RAID 10 configuration requires four hard drives. (Note) When a RAID configuration is - Gigabyte GA-7PESH1 | Manual - Page 23
with SATA 3Gb/s signal) The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard. Each SATA connector supports two SATA device. 12/13) MINI_CN2/MINI_CN3 (Mini SAS cable connectors) The mini SAS connectors conform to SAS 6Gb/s standard. A1 B1 MINI_CN1 - Gigabyte GA-7PESH1 | Manual - Page 24
) TPM_1 (TPM Module Connector) Pin No. Definition 1 AST2300_SCGCLK 2 FM_THROTTLE_AND_N 12 3 AST2300_SGLD 4 IQO_FAN_12v_GATE_N 5 AST2300_SGDOUT 6 GND 7 KEY 8 RresetL_BRB 9 GND 10 BP_ALED_N 25 26 11 BP_LED_G_N 12 GND 13 AST2300_SGDIN 14 ASSESS#_LED_BPB 15 GND 16 SMB_BPB1_DATA 17 - Gigabyte GA-7PESH1 | Manual - Page 25
Signal cathode(-) 7 HD+ Hard Disk LED Signal anode (+) 8 F_SYSRDY System Front board LED Signal 9 HD- Hard Disk LED Signal cathode(-) 10 SYS_STATUS- System Status LED Signal cathode(-) 11 PWB+ Power Button Signal anode (+) 12 L1_ACT LAN1 active LED Signal 13 PWB+_GND - Gigabyte GA-7PESH1 | Manual - Page 26
HBA and 1 is driven by the backplane. Typically, the HBA is a storage controller located inside a server, desktop, rack or workstation computer that interfaces with Hard disk HDDs) to store and retrieve data. Pin No. Definition 9 10 1 SGPIO_SATA_DATAIN 2 No Pin 3 SGPIO_SATA_DATAOUT 12 4 GND 5 - Gigabyte GA-7PESH1 | Manual - Page 27
Upgrade ROM Hearder) 1 3 Pin No. 1 2 3 Definition GND FM_PBG_DYN_SKU_KEY GND 20) BAT1 (Battery) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops - Gigabyte GA-7PESH1 | Manual - Page 28
21) LED2 (LSI Firmware Readiness LED) LED2 Link/Activity: State Description Blinking LSI firmware is ready Off LSI firmware is not ready 22) BMC_LED1 (BMC Firmware Readiness LED) LED2 Link/Activity: State Description On BMC firmware is initial Blinking BMC firmware is ready Off System - Gigabyte GA-7PESH1 | Manual - Page 29
1-7 Jumper Setting 8 7 6 12 3 9 54 1) CLR_CMOS1 2) BIOS_WP1 3) SSB_ME1 4) JP1 5) PASSWORD1 6) BIOS_RCVR1 7) SATA_DOM0 8) SATA_DOM1 9) FLASH_DP1 - 29 - Hardware Installation - Gigabyte GA-7PESH1 | Manual - Page 30
to the motherboard. • After system restart, go to BIOS Setup Exit menu and load factory defaults (select Load Default Values) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). 2) BIOS_WP1 (BIOS Write Protect Jumper) 1 1-2 Close: Normal operation - Gigabyte GA-7PESH1 | Manual - Page 31
3) SSB_ME1 (ME enable/disable Jumper) SSB_ME1 1 1-2 Close: Normal operation. (Default setting) 1 2-3 Close: Disable ME function. 4) JP5 (Case Open Intrusion Jumper) Open: Enable chassis intrusion alert. Close: Normal operation. (Default setting) - 31 - Hardware Installation - Gigabyte GA-7PESH1 | Manual - Page 32
5) PASSWORD1 (Skip Supervisor Password Jumper) 1 1-2 Close: Normal operation. (Default setting) 1 2-3 Close: Skip supervisor password. 6) BIOS_RVCR1 (BIOS Recovery Jumper) 1 1-2 Close: Normal operation. (Default setting) 1 2-3 Close: BIOS recovery mode. Hardware Installation - 32 - - Gigabyte GA-7PESH1 | Manual - Page 33
order to reduce any risk of hard disk damage. 1 1-2 Close: Enable SATA0/SATA1 port DOM support. 1 2-3 Close: Normal mode. (Default setting) 9) FLASH_DP1 (Flash Descriptor Security Jumper) 1 1-2 Close: Flash Descriptor Security Overridden 1 2-3 Close: Flash Descriptor Security in effect. (Default - Gigabyte GA-7PESH1 | Manual - Page 34
the POST when the power is turned on. • BIOS flashing is potentially risky, if you do not encounter problems of using the current BIOS version, it is recommended that you don't flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction. • It is - Gigabyte GA-7PESH1 | Manual - Page 35
Main This setup page includes all the items in standard compatible BIOS. Advanced This setup page includes all the items of AMI BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.) Chipset This setup page includes all the - Gigabyte GA-7PESH1 | Manual - Page 36
2-1 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to as usual, select the Load Default Values item to set your system to its defaults. • The BIOS Setup menus described in this chapter are for reference only and may differ by - Gigabyte GA-7PESH1 | Manual - Page 37
Display version number of the BIOS setup utility. Memory Information Total Memory Determines how much total memory is present during the POST. System Date Set the date following the weekday-month-day- year format. System Time Set the system time following the - Gigabyte GA-7PESH1 | Manual - Page 38
2-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. BIOS Setup - 38 - - Gigabyte GA-7PESH1 | Manual - Page 39
Options available: Enabled/Disabled. Default setting is Enabled. Onboard LAN1/2 Controller Enable/Disable Onboard LAN controller . Options available: Enabled/Disabled. Default setting is Enabled. LAN1/2 to NMI. Options available: Enabled/Disabled. Default setting is Disabled. - 39 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 40
2-2-2 Trusted Computing (Optioanl) TPM Support Select Enabled to activate TPM support feature. Options available: Enabled/Disabled. Default setting is Enabled. TPM State (Note) Select current TPM status information. (Note) This item appears when the TPM module is attached. BIOS Setup - 40 - - Gigabyte GA-7PESH1 | Manual - Page 41
2-2-3 CPU Configuration - 41 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 42
BIOS Setup - 42 - - Gigabyte GA-7PESH1 | Manual - Page 43
Technology function support information. Cache Information L1 Data Cache Display the information of L1 Data Cache. L1 Code Cache Display the information of L1 Code Cache. L2 Cache Display the information of L2 Cache per Core. L3 Cache Display the information of total L3 Cache per socket. Hyper - Gigabyte GA-7PESH1 | Manual - Page 44
disabled, the processor will not restrict code execution in any memory area. This makes the processor more vulnerable to buffer Energy Performace Optimize between performance and power savings. Windows 2008 and later OSes overrides this value according to is Energy Efficient. BIOS Setup - 44 - - Gigabyte GA-7PESH1 | Manual - Page 45
2-2-4 Runtime Error Logging Runtime Error Logging Support Enable/Disable Runtime error logging support. Options available: Enabled/Disabled. Default setting is Enabled. - 45 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 46
controller enables its AHCI functionality. Then the RAID function is disabled and cannot be access the RAID setup utility at boot time. Options available: IDE/RAID/AHCI/Disabled. Default setting is AHCI Mode. (Note) This item is will not appear when the SATA mode is set ot RAID mode. BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 47
2-2-6 Super IO Configuration - 47 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 48
=3F8h; IRQ=3,4,5,6,7,10,11,12/ IO=2F8h; IRQ=3,4,5,6,7,10,11,12 /IO=3E8h; IRQ=3,4,5,6,7,10,11,12/IO=2E8h; IRQ=3,4,5,6,7,10,11,12. Device Mode Change the Serial Port mode. Options available: Standard Serial Port Mode (Normal Mode)/IrDA 1.0 (HP SIR) Mode (High Speed)/ ASKIRfdgdg Mode. BIOS Setup - 48 - Gigabyte GA-7PESH1 | Manual - Page 49
2-2-7 Serial Port Console Redirection - 49 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 50
' signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop signals. Options available: None/Hardware RTS/CTS. VT-UTF8 Combo Key Support Enable/Disable VT-UTF8 Combo Key Support. Options available: Enabled/Disabled. Default setting is Enabled. BMC SOL Serial - Gigabyte GA-7PESH1 | Manual - Page 51
2-3 Chipset Menu The Chipset menu display submenu options for configuring the function of North Bridge and South Bridge. Select a submenu item, then press Enter to access the related submenu screen. - 51 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 52
same set of operations in parallel. When set to Sparing mode, a preset threshold of coorectable errors is used to trigger fail-over. The spare memory is put online and used as active memory in place of the failed memory. Options available: Indpendent /Mirroring/ Lockstep/Sparing. BIOS Setup - 52 - - Gigabyte GA-7PESH1 | Manual - Page 53
Numa Enable/Disable Non Uniform Memory Access (NUMA) function. Options available: Enabled/Disabled. Default setting is Enabled. DIMM Voltage Configure the DIMM voltage. Options disabled, the system will enforce 1600MHz LRDIMM. Options available: Enforce EN/Stretch EN/Enforce DIS. - 53 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 54
2-3-1-1 IOH Configuration BIOS Setup - 54 - - Gigabyte GA-7PESH1 | Manual - Page 55
WA's Enable/DIsable the support for Gen3 Equalization Workaround. Options available: Enabled/Disabled. Default setting is Disabled. IOH 0/1 PCIe port Bifurcation Control IOU1 - PCIe Port Options function. Options available: Enabled/Disabled. Default setting is Disabled. - 55 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 56
Status DDR3_P0_C0/DDR3_P0_C1/DDR3_P0_D0/DDR3_P0_D1 Status The size of memory installed on each of the DDR3 slots. CPU Socket 1: DDR3_P0_E0/DDR3_P0_E1/DDR3_P0_F0/DDR3_P0_F1 Status DDR3_P0_G0/DDR3_P0_G1/DDR3_P0_H0/DDR3_P0_H1 Status The size of memory installed on each of the DDR3 slots. To clear - Gigabyte GA-7PESH1 | Manual - Page 57
. SB Chipset Configuration PCH Compatibility RID Enable/Disable PCH Compatibility RID support. Options available: Enabled/Disabled. Default setting is Disabled. Restore on . (Note) When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the last power state. - Gigabyte GA-7PESH1 | Manual - Page 58
2-3-3 ME Subsystem ME Subsystem Configuration Enable/Disable ME subsystem configuration. Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup - 58 - - Gigabyte GA-7PESH1 | Manual - Page 59
Date, and Set User Password fields. Administrator Password Press Enter to configure the Administrator password. User Password Press Enter to configure the user password. - 59 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 60
2-5 Server Management Menu System Information Displays basic system ID information, as well as BIOS version. Press Enter to access the related submenu. BMC LAN Configuration BMC LAN Configuration. Press Enter to access the related submenu. Select NCSI and Dedicated - Gigabyte GA-7PESH1 | Manual - Page 61
2-5-1 System Information The System Management submenu is a simple display page for basic system ID information, as well as System product information. Items on this window are non-configurable. - 61 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 62
Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option willnot modify any BMC network parameters during BIOS phase. Options available: Static/Dynamic/Do Nothing. IP Address Display IP Address information. Subnet Mask Display Subnet Mask information. Please - Gigabyte GA-7PESH1 | Manual - Page 63
Option Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot showing the logo during POST. Options available: Enabled/Disabled. Default setting is Disabled. - 63 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 64
Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When enabled, this BIOS feature allows the ROM BIOS of those host adaptors to "capture" Interrupt 19 during the boot process so that drives attached to these adaptors can function as bootable disks. - Gigabyte GA-7PESH1 | Manual - Page 65
2-7 Boot Manager The Boot manager menu allows you to specify the boot-up drive. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Override P1: Press . UEFI: Built-in EFI Shell Press Enter to configure the device as the boot-up drive. - 65 - BIOS Setup - Gigabyte GA-7PESH1 | Manual - Page 66
. Options available: Yes/No. Load Default Values Loads the default settings for all BIOS setup parameters. Setup Defaults are quite demanding in terms of resources consumption. If you are using low-speed memory chips or other kinds of low-performance components and you choose to load these settings - Gigabyte GA-7PESH1 | Manual - Page 67
Options available: Yes/No. Load User Default Values Loads the user default settings for all BIOS setup parameters. Options available: Yes/No. - 67 - BIOS Setup
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
 |
 |
GA-7PESH1
GA-7PESH2
Dual LGA2011 sockets motherboard for Intel
®
E5-2600
series processors
User's Manual
Rev. 1001