Gigabyte GA-8IK1100 User Manual
Gigabyte GA-8IK1100 Manual
 |
View all Gigabyte GA-8IK1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte GA-8IK1100 manual content summary:
- Gigabyte GA-8IK1100 | User Manual - Page 1
compatible with 2X(3.3V) / 4X(1.5V) mode AGP slot, but they support 2X(3.3V) only. The GA-8KNXP / GA-8IK1100 (or any AGP Pro 4X/8X only) motherboards might not function properly, If you install this card in it. Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage 128 Pro chip, the - Gigabyte GA-8IK1100 | User Manual - Page 2
document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some - Gigabyte GA-8IK1100 | User Manual - Page 3
41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-8KNXP / GA-8IK1100 is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive - Gigabyte GA-8IK1100 | User Manual - Page 4
City of Industry, CA 91748 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Motherboard Model Number: GA-8KNXP / GA-8IK1100 Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device - Gigabyte GA-8IK1100 | User Manual - Page 5
GA-8KNXP / GA-8IK1100 P4 Titan Series Motherboard USER'S MANUAL Pentium® 4 Processor Motherboard Rev. 1002 12ME-8KNXP-1002 - Gigabyte GA-8IK1100 | User Manual - Page 6
5 Features Summary 5 GA-8KNXP / GA-8IK1100 Motherboard Layout 8 Block Diagram 9 Chapter 2 Hardware Installation Process 11 Step 1: Install the Central Processing Unit (CPU 12 Step 1-1: CPU Installation 12 Step 1-2: CPU Cooling Fan Installation 13 Step 2: Install Memory Modules 14 Step - Gigabyte GA-8IK1100 | User Manual - Page 7
56 PC Health Status 57 Frequency/Voltage Control 59 Select Language 62 Load Fail-Safe Defaults 63 Load Optimized Defaults 64 Set Supervisor/User Password 65 Save & Exit Setup 66 Exit Without Saving 67 Chapter 4 Technical Reference 69 @BIOS™ Introduction 69 EasyTune™ 4 Introduction 70 DPS2 - Gigabyte GA-8IK1100 | User Manual - Page 8
from the motherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don't let the screw contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise it may damage the board or cause board malfunctioning. GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 9
Features Summary Form Factor Motherboard CPU Chipset Memory I/O Control Slots On-Board IDE Serial ATA y 30.5cm x 24.4cm ATX size form factor, 6 layers PCB y GA-8KNXP or GA-8IK1100 y Socket 478 for Intel® Micro FC-PGA2 Pentium® 4 processor y Support Intel® Pentium® 4 (Northwood, Prescott) processor - Gigabyte GA-8IK1100 | User Manual - Page 10
in controller onboard BIOS y Built in ICH5R y Supports Disk striping (RAID0) y Supports UDMA up to 150 MB/sec y AIL UDMA and PIO Modes y Up to 2 SATA devices y ACPI and ATA/ATAPI6 y Only supports Windows XP # Only for GA-8IK1100. to be continued...... GA-8KNXP / GA-8IK1100 Motherboard - 6 - - Gigabyte GA-8IK1100 | User Manual - Page 11
English On-Board SATA RAID * On-Board 1394 PS/2 Connector BIOS Additional Features Jumper less Overclocking y Built in Silicon Image Sil3112 y Supports Disk striping (RAID0) or DISK Mirroring (RAID1) y Supports UDMA up to 150 MB/sec y UDMA and PIO Modes y Up to 2 SATA devices y ACPI and ATA/ATAPI6 - Gigabyte GA-8IK1100 | User Manual - Page 12
English GA-8KNXP / GA-8IK1100 Motherboard Layout KB_MS R_USB CPU_FAN RAM_LED COMA SOCKET 478 ATX FDD VRM_CONN* LPT GA-8KNXP (or GA-8IK1100) DDR1 DDR2 DDR3 DDR4 DDR5 DDR6 IDE2 ATX_12V NB_FAN COMB LAN USB F_AUDIO CD_IN AUDIO1 SPDIF_IO Intel® 875P Intel KENAI II* Intel Kinnereth R# - Gigabyte GA-8IK1100 | User Manual - Page 13
4 Socket 478 CPU CPUCLK+/- (100/133/200MHz) System Bus 800/533/400MHz 266/333/400MHz 5 PCI Intel 875P Intel Kinnereth R# DDR RAM MCHCLK (100/133/200MHz) 66 MHz 33 MHz 48 MHz 14.318 MHz RJ45# PCICLK (33MHz) ITE* GigaRAID TSB43AB23 IT8212 Intel ICH5R AC97 Link AC97 CODEC 8 USB Ports - Gigabyte GA-8IK1100 | User Manual - Page 14
English GA-8KNXP / GA-8IK1100 Motherboard - 10 - - Gigabyte GA-8IK1100 | User Manual - Page 15
must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Connect ribbon cables, cabinet wires to the power outlet. Continue with the BIOS/software installation. - 11 - Hardware Installation Process - Gigabyte GA-8IK1100 | User Manual - Page 16
CPU) Before installing the processor, adhere to the following warning: 1. Please make sure the CPU type is supported by the motherboard. 2. If you do not match the CPU socket Pin 1 and CPU 3. CPU Top View GA-8KNXP / GA-8IK1100 Motherboard 4. Locate Pin 1 in the socket and look for a (golden) cut - Gigabyte GA-8IK1100 | User Manual - Page 17
, this completes the installation. Please refer to CPU cooling fan user's manual for more detail installation procedure. 1. Fasten the cooling fan supportingbase onto the CPU socket on the motherboard. 2. Make sure the CPU fan is plugged to the CPU fan connector, than install complete. - 13 - Gigabyte GA-8IK1100 | User Manual - Page 18
direction. 2. Insert the DIMM memory module vertically into the DIMM socket. Then push it down. 3. Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module. Reverse the installation steps when you wish to remove the DIMM module. GA-8KNXP / GA-8IK1100 Motherboard - 14 - - Gigabyte GA-8IK1100 | User Manual - Page 19
that are suitable for servers, workstations, and full range of desktop PCs. Dual Channel DDR: GA-8KNXP / GA-8IK1100 supports Dual Channel Technology. When Dual Channel Technology is activated, the bandwidth of memory bus will be double the original one,with the fastest speed at 6.4GB/s DDR400 - Gigabyte GA-8IK1100 | User Manual - Page 20
X DS/SS X DS/SS SS DIMM6 X X DS/SS X SS z Figure 2: Don't operate Dual Channel Technology (DS: Double Side, SS: Single Side) 1 memory module 2 memory modules 3 memory modules DIMM 1 DS/SS X X DS/SS DS/SS DIMM 3 X DS/SS X DS/SS SS DIMM5 X X DS/SS X SS GA-8KNXP / GA-8IK1100 Motherboard - 16 - - Gigabyte GA-8IK1100 | User Manual - Page 21
instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard BIOS utility of expansion card from BIOS. 8. Install related driver - Gigabyte GA-8IK1100 | User Manual - Page 22
a notch, so the DPS2 can only fit in one direction. 2. Insert the DPS2 vertically into the socket and then push it down. 3. Fix the DPS2 on the motherbard with the clip. 4. Reverse the installation steps if you want to remove the DPS2. * Only for GA-8KNXP. GA-8KNXP / GA-8IK1100 Motherboard - 18 - - Gigabyte GA-8IK1100 | User Manual - Page 23
pin Female) Y/[ USB/LAN Connector USB 0 USB 1 LAN USB 2 USB 3 Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard,mouse, scanner, zip, speaker...etc. Have a standard USB interface. Also make sure your OS supports USB controller. If your OS - Gigabyte GA-8IK1100 | User Manual - Page 24
Port (25 pin Female) This connector supports 2 standard COM ports and 1 Audio Connectors Line In (Rear Speaker) Line Out (Front Speaker) MIC In (Center and Subwoofer) After install onboard audio driver audio setup installation, please refer to page 82. GA-8KNXP / GA-8IK1100 Motherboard - 20 - - Gigabyte GA-8IK1100 | User Manual - Page 25
SYS_FAN 5) PWR_FAN 6) NB_FAN 7) FDD 8) IDE1 / IDE2 9) IDE3* / IDE4* 10) SATA0_SB / SATA1_SB 11) SATA0_SII* / SATA1_SII* 12) BAT 13) F_PANEL 14) PWR_LED 15) RAM_LED * Only for GA-8KNXP. 8 5 12 10 11* 23 22 9* 29 26 14 13 16) 2X_DET 17) F_AUDIO 18) SUR_CEN 19) SPDIF_IO 20) CD_IN 21) AUX_IN 22) F_USB1 - Gigabyte GA-8IK1100 | User Manual - Page 26
English 1) ATX_12V (+12V Power Connector) This connector (ATX_12V) supplies the CPU operation voltage (Vcore). If this "ATX_12V connector" is not connected, system cannot boot. Pin No. Definition 3 4 1 2 GND 16 GND 17 GND 18 -5V 19 VCC 20 VCC GA-8KNXP / GA-8IK1100 Motherboard - 22 - - Gigabyte GA-8IK1100 | User Manual - Page 27
) Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running under abnormal condition or damaged by overheating. The CPU fan connector supports Max. current up to 600 mA. Pin No. Definition 1 1 GND 2 +12V 3 Sense 4) SYS_FAN (System Fan Connector - Gigabyte GA-8IK1100 | User Manual - Page 28
installed wrong direction, the chip fan will not work. Sometimes will damage the chip fan. (Usually black cable is GND) 1 Pin No. Definition 1 VCC 2 GND GA-8KNXP / GA-8IK1100 Motherboard - 24 - - Gigabyte GA-8IK1100 | User Manual - Page 29
English 7) FDD (Floppy Connector) Please connect the floppy drive ribbon cables to FDD. It supports 360K, 1.2M, 720K, 1.44M and 2.88M bytes floppy disk types. The red stripe of the ribbon cable must be the same side with the Pin1. - Gigabyte GA-8IK1100 | User Manual - Page 30
/sec). If you wish to use RAID function, please note that these two Serial ATA connectors just support RAID0 and only compatible with WinXP. 7 1 SATA0_SB 7 1 SATA1_SB Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND * Only for GA-8KNXP. GA-8KNXP / GA-8IK1100 Motherboard - 26 - - Gigabyte GA-8IK1100 | User Manual - Page 31
unity with BIOS and install the correct driver to have proper operation. For details, please refer to the SATA RAID manual. 7 1 SATA0_SII 7 1 SATA1_SII Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND These two Serial ATA(SATA0_SII/SATA1_SII) connectors support hot plug function - Gigabyte GA-8IK1100 | User Manual - Page 32
2- Pin 3: NC Pin 4: Data(-) Open: Normal Operation Close: Reset Hardware System Open: Normal Operation Close: Power On/Off Pin 1: LED anode(+) Pin 2: LED cathode(-) NC GA-8KNXP / GA-8IK1100 Motherboard - 28 - - Gigabyte GA-8IK1100 | User Manual - Page 33
mode. If you use dual color LED, power LED will turn to another color. 1 Pin No. Definition 1 MPD+ 2 MPD- 3 MPD- 15) RAM_LED Do not remove memory modules while RAM_LED is on. It might cause short or other unexpected damages due to the stand by voltage. Remove - Gigabyte GA-8IK1100 | User Manual - Page 34
, you can have the alternative of using front audio connector or of using rear audio connector to play sound. 10 9 21 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition MIC GND REF Power Front Audio (R) Rear Audio (R) Reserved No Pin Front Audio (L) Rear Audio (L) GA-8KNXP / GA-8IK1100 Motherboard - 30 - - Gigabyte GA-8IK1100 | User Manual - Page 35
2 SUR OUTR 3 GND 21 4 No Pin 5 CENTER_OUT 6 BASS_OUT 19) SPDIF_IO (SPDIF In / Out Connector) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital - Gigabyte GA-8IK1100 | User Manual - Page 36
or DVD-ROM audio out to the connector. Pin No. Definition 1 CD-L 2 GND 3 GND 1 4 CD-R 21) AUX_IN (AUX In Connector) Connect other device (such as PCI TV Tunner audio out) to the connector. Pin No. Definition 1 AUX-L 2 GND 3 GND 1 4 AUX-R GA-8KNXP / GA-8IK1100 Motherboard - 32 - Gigabyte GA-8IK1100 | User Manual - Page 37
, please contact your local dealer. 2 10 F_USB1 F_USB2 19 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition Power Power USB DxUSB DyUSB Dx+ USB Dy+ GND GND No Pin NC 23) F1_1394 / F2_1394 (IEEE1394 Connector) Please Note: Serial interface standard set by Institute of Electrical and Electronics Engineers - Gigabyte GA-8IK1100 | User Manual - Page 38
CIRRX +5VSB CIRTX NC 25) GAME (Game Connector) This connector supports joystick, MIDI keyboard and other relate audio devices. Check the pin assignment while you connect the game cables. GND 11 GPY1_R 12 VCC 13 GPSB1 14 MSO_R 15 GPSB2 16 No Pin GA-8KNXP / GA-8IK1100 Motherboard - 34 - - Gigabyte GA-8IK1100 | User Manual - Page 39
GND No Pin NC +12V +12V 27) CI (CASE OPEN) This 2-pin connector allows your system to enable or disable the "Case Open" item in BIOS, if the system case begin remove. 1 Pin No. Definition 1 Signal 2 GND - 35 - Hardware Installation Process - Gigabyte GA-8IK1100 | User Manual - Page 40
English 28) WOL (Wake On LAN) This connector allows the remote servers to manage this system via your network adapter which supports WOL. Be careful with the polarity of the WOL close", the current status remains. Open: Clear Password 1 Close: Normal 1 GA-8KNXP / GA-8IK1100 Motherboard - 36 - - Gigabyte GA-8IK1100 | User Manual - Page 41
- 37 - Introduction English - Gigabyte GA-8IK1100 | User Manual - Page 42
English GA-8KNXP / GA-8IK1100 Motherboard - 38 - - Gigabyte GA-8IK1100 | User Manual - Page 43
Del> immediately will allow you to enter Setup. If you require more advanced BIOS settings, please go to "Advanced BIOS" setting menu. To enter Advanced BIOS setting menu, press "Ctrl+F1" key on the BIOS screen. CONTROL KEYS Move to previous item Move to next item Move to the item - Gigabyte GA-8IK1100 | User Manual - Page 44
Save & Exit Setup Frequency/Voltage Control Exit Without Saving ESC: Quit F3: Change Language F8: Dual BIOS / Q-Flash F10: Save & Exit compatible BIOS. z Advanced BIOS Features This setup page includes all the items of Award special enhanced features. GA-8KNXP / GA-8IK1100 Motherboard - - Gigabyte GA-8IK1100 | User Manual - Page 45
is the System auto detect Temperature, voltage, fan, speed. z Frequency / Voltage Control This setup page is control CPU's clock and frequency ratio. z Select Language This setup page is select multi language. . z Exit Without Saving Abandon all CMOS value changes and exit setup. - 41 - BIOS Setup - Gigabyte GA-8IK1100 | User Manual - Page 46
Drive A Drive B Floppy 3 Mode Support Halt On Base Memory Extended Memory Total Memory [1.44M, 3.5"] [None] [Disabled] BIOS and is display only The month, Jan. Through Dec. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1999 through 2098 GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 47
F that has been installed in the computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the 1.44M byte capacity. 2.88M, 3.5" 3.5 inch double-sided drive; 2.88M byte capacity. - 43 - BIOS Setup - Gigabyte GA-8IK1100 | User Manual - Page 48
Support motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard. Extended Memory The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1MB in the CPU's memory address map. GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 49
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 3: Advanced BIOS Features " # " System will detect automatically and show up when you install the Intel® Pentium® 4 processor with HT Technology. SCSI/SATA/RAID Boot Order* This feature allows you to select the boot order Serial - Gigabyte GA-8IK1100 | User Manual - Page 50
is only working for operating system with multi processors mode supported. (Default value) Disabled Disables CPU Hyper Threading. DRAMData Integrity Mode If you are using the show up when you install the Intel® Pentium® 4 processor with HT Technology. GA-8KNXP / GA-8IK1100 Motherboard - 46 - - Gigabyte GA-8IK1100 | User Manual - Page 51
On-Chip SATA [Manual] If a hard disk SATA Port0 Configure as [SATA Port0] controller card is SATA Port1 Configure as SATA Port1 used, set at Disabled SATA RAID Function [Enabled] USB Controller [Enabled] [Enabled] USB 2.0 Controller [Enabled] Enabled onboard IDE USB Keyboard Support - Gigabyte GA-8IK1100 | User Manual - Page 52
, it support by WinXP or later OS only. SATA Port1 Configure as The values depend on SATA Port0. SATA RAID Function Enabled Enable SATA Raid function when SATA Mode set to SATA Port 0 & SATA Port 1 only. (Default value) Disabled Disable SATA Raid function. GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 53
Mouse Support. Disable USB Mouse Support. (Default value) AC97 Audio Auto Disabled Auto detect AC'97 audio function. (Default Value) Disable AC'97 audio function. Onboard H/W SATA* Enabled Disabled Enable onboard SATA function. (Default value) Disable this function. Serial ATA Function* RAID - Gigabyte GA-8IK1100 | User Manual - Page 54
boot ROM of the onboard LAN chip. Disabled Disable this function. (Default Value) Enabled Enable this function. Onboard Serial Port 1 Auto BIOS will automatically setup the port is 2E8. Disabled Disable onboard Serial port 2. * Only for GA-8KNXP. GA-8KNXP / GA-8IK1100 Motherboard - 50 - - Gigabyte GA-8IK1100 | User Manual - Page 55
if the parallel port uses the onboard I/O controller. Disabled Disable onboard LPT port. 378/ advanced printer via the port mode it supports. SPP Using Parallel port as Standard Parallel ECPMode UseDMA This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected - Gigabyte GA-8IK1100 | User Manual - Page 56
to 320. Disabled Disable this function. (Default Value) CIR Port IRQ 5 11 Set CIR Port IRQ to 5. Set CIR Port IRQ to 11. (Default Value) GA-8KNXP / GA-8IK1100 Motherboard - 52 - - Gigabyte GA-8IK1100 | User Manual - Page 57
mode(S1): a. If use single color LED, power LED will turn off. b. If use dual color LED, power LED will turn to another color. - 53 - BIOS Setup - Gigabyte GA-8IK1100 | User Manual - Page 58
other client server on the LAN can awake the system from any suspend state. Disabled Disable Modem Ring on/wake on Lan function. Enabled Enable Modem Ring on/wake on Lan. (Default Value) Resume by click on PS/2 mouse left button to power on the system. GA-8KNXP / GA-8IK1100 Motherboard - 54 - - Gigabyte GA-8IK1100 | User Manual - Page 59
password here. Enter Input password (from 1 to 5 characters) and press Enter to set the Keyboard Power On password. AC BACK Function Soft-Off Full-On Memory When AC-power back to the system, the system will be in "Off" state. (Default Value) When AC-power back to the system, the system - Gigabyte GA-8IK1100 | User Manual - Page 60
3. PCI 4 IRQ Assignment Auto Auto assign IRQ to PCI 4. (Default value) 3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 4. GA-8KNXP / GA-8IK1100 Motherboard - 56 - - Gigabyte GA-8IK1100 | User Manual - Page 61
FAN Speed 0 RPM CPU Warning Temperature [Disabled] CPU FAN Fail Warning [Disabled] POWER FAN Fail Warning [Disabled] SYSTEM FAN Fail Warning [Disabled] CPU Smart FAN Control [Enabled] : Move / DDR25V / +3.3V / +5V / +12V Detect system's voltage status automatically. - 57 - BIOS Setup - Gigabyte GA-8IK1100 | User Manual - Page 62
Fan control function. (Default value) a. When the CPU temperature is higher than 40 degrees Celsius, CPU fan will run at full speed. b. When the CPU temperature is lower than 40 degrees Celsius, CPU fan will run at low speed. Disabled Disable this function. GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 63
133 Ú AGP/PCI/SRC Fixed 66/33/100 Memory Frequency For [Auto] Memory Frequency (Mhz) 266 AGP/PCI/SRC Frequency (Mhz) 66/33/100 DIMM OverVoltage Control [Normal] AGP OverVoltage Control [Normal] CPU Voltage Control [Normal] Normal CPU Vcore 1.5250V : Move Enter:Select +/-/PU/PD:Value - Gigabyte GA-8IK1100 | User Manual - Page 64
data. (Default value) for FSB(Front Side Bus) frequency=800MHz, 2.0 Memory Frequency = Host clock X 2.0. 1.6 Memory Frequency = Host clock X 1.6. 1.33 Memory Frequency = Host clock X 1.33. Auto Set Memory frequency by DRAM SPD data. (Default value) GA-8KNXP / GA-8IK1100 Motherboard - 60 - - Gigabyte GA-8IK1100 | User Manual - Page 65
broken. For power End-User use only! CPU Voltage Control Supports adjustable CPU Vcore from 0.8375V to 1.6000V by 0.025V step. (Default value: Normal) Incorrect using it may cause your system broken. For power End-User use only! Normal CPU Vcore Display your CPU Vcore Voltage. - 61 - BIOS Setup - Gigabyte GA-8IK1100 | User Manual - Page 66
/PCI Configurations PC Health Status Frequency/Voltage Control ESC: Quit F8: Dual BIOS / Q-Flash Select Language Load Fail-Safe Language is supports 7 languages. There are English, French, German, Spanish, Traditional Chinese, Simplified Chinese, Japanese. GA-8KNXP / GA-8IK1100 Motherboard - 62 - Gigabyte GA-8IK1100 | User Manual - Page 67
(YSe/Nt )S?upYervisor Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup Frequency/Voltage Control Exit Without Saving ESC: Quit F8: Dual BIOS / Q-Flash F3: Change Language F10: Save & Exit Setup Load Fail-Safe Defaults Figure 11: Load Fail-Safe Defaults - Gigabyte GA-8IK1100 | User Manual - Page 68
BIOS / Q-Flash F3: Change Language F10: Save & Exit Setup Load Optimized Defaults Figure 12: Load Optimized Defaults Load Optimized Defaults Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects. GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 69
Set Supervisor Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup Frequency/Voltage Control Exit Without Saving ESC: Quit F3: Change Language F8: Dual BIOS / Q-Flash F10: Save & Exit Setup Change/Set/Disable Password Figure 13: Password Setting When you - Gigabyte GA-8IK1100 | User Manual - Page 70
Saving ESC: Quit F3: Change Language F8: Dual BIOS / Q-Flash F10: Save & Exit Setup Save Data to CMOS Figure 14: Save & Exit Setup Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS. Type "N" will return to Setup Utility. GA-8KNXP / GA-8IK1100 Motherboard - 66 - - Gigabyte GA-8IK1100 | User Manual - Page 71
Password PnP/PCI ConfigurationQsuit Without Saving (Y/NS)e?tNUser Password PC Health Status Save & Exit Setup Frequency/Voltage Control Exit Without Saving ESC: Quit F8: Dual BIOS / Q-Flash F3: Change Language F10: Save & Exit Setup Abandon all Data Figure 15: Exit Without Saving Type - Gigabyte GA-8IK1100 | User Manual - Page 72
English GA-8KNXP / GA-8IK1100 Motherboard - 68 - - Gigabyte GA-8IK1100 | User Manual - Page 73
motherboard vendors could not just do something right to save your time and effort and save you from the lousy BIOS updating work? Here it comes! Now Gigabyte announces @BIOS -- the first Windows BIOS live update utility. This is a smart BIOS update software. It could help you to download the BIOS - Gigabyte GA-8IK1100 | User Manual - Page 74
fully supported by EasyTune 4. Please find the products supported list in the web site. *Any "Overclocking action" is at user's risk, Gigabyte Technology will not be responsible for any damage or instability to your processor, motherboard, or any other components. GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 75
A new innovation technology from Gigabyte Technology in which gives you a total of 6phase power circuit design. Providing 2 extra phase power circuits that motherboard design guideline recommended. In will keep working as main power circuit. DPS2 * Only for GA-8KNXP. - 71 - Technical Reference - Gigabyte GA-8IK1100 | User Manual - Page 76
BIOS / Q-Flash UtilSiteyt S(Yup/Ner)v?isoYr Password ` PnP/PCI Configurations Set User Password ` PC Health Status Save & Exit Setup ` Frequency/Voltage Control Exit Without Saving ESC: Quit F8: Dual BIOS / Q-Flash F3: Change Language F10: Save & Exit Setup GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 77
Q-Flash Utility Update Main BIOS from Floppy Update Backup BIOS from Floppy Save Main BIOS to Floppy Save Backup BIOS to Floppy PgDn the PC will boot from Backup BIOS automatically. Status 2: If the ROM BIOS on peripherals cards(ex. SCSI Cards, LAN Cards,..) emits signals torequest restart - Gigabyte GA-8IK1100 | User Manual - Page 78
Backup BIOS works normally and could automatically recover the Main BIOS. (This auto recovery utility is set by system automatically and can't be changed by user.) • Load Default Settings Load dual BIOS default value. • Save Settings to CMOS Save revised setting. GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 79
: 1.14M DEL: Delete ESC: Return Main Where XXXX.XX is name of the BIOS file. Press Enter to Run. Are you sure to update BIOS? [Enter] to contiune Or [ESC] ot abort... Press Enter to Run. !! COPY BIOS Completed -Pass !! Please press any key to continue Congratulation! You have completed the - Gigabyte GA-8IK1100 | User Manual - Page 80
English Save Main BIOS to Floppy / Save Backup BIOS to Floppy In the A:drive, insert the floppy disk, then Press Enter to Run. File name: XXXX.XX TYPE FILE NAME to previous item Move to next item Run Reset Power Off GA-8KNXP / GA-8IK1100 Motherboard - 76 - - Gigabyte GA-8IK1100 | User Manual - Page 81
-added" feature, in a long series of innovations from GIGABYTE, is available on this motherboard. Future GIGABYTE motherboards will also incorporate this innovation. What's DualBIOS™? On GIGABYTE motherboards with DualBIOS there are physically two BIOS chips. For simplicity we'll call one your "Main - Gigabyte GA-8IK1100 | User Manual - Page 82
a one-way flash utility. The built-in one-way flash utility will ensure that the corrupt BIOS is not mistaken as the good BIOS during recovery and that the correct BIOS (main vs. backup) will be flashed. This will prevent the good BIOS from being flashed. GA-8KNXP / GA-8IK1100 Motherboard - 78 - - Gigabyte GA-8IK1100 | User Manual - Page 83
.) A user may override booting from the main system BIOS. The DualBIOS™ utility may be entered to manually change the boot sequence to boot from the backup BIOS. 2. During or after a BIOS upgrade, if DualBIOS™ detects that the main BIOS is corrupt, the backup BIOS will take over the boot-up process - Gigabyte GA-8IK1100 | User Manual - Page 84
(3) (4) Methods and steps: I. Update BIOS through Internet a. Click "Internet Update" icon b. Click "Update New BIOS" icon c. Select @BIOS™ sever d. Select the exact model name on your motherboard e. System will automatically download and update the BIOS. GA-8KNXP / GA-8IK1100 Motherboard - 80 - - Gigabyte GA-8IK1100 | User Manual - Page 85
, downloading from internet or any other methods (such as: 8KNXP.E4). e. Complete update process following the instruction. III. Save BIOS In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save the current BIOS version. IV. Check out supported motherboard and - Gigabyte GA-8IK1100 | User Manual - Page 86
of the audio driver, you'll find an icon on the taskbar's status area. Click the audio icon "Sound Effect" from the windows tray at the bottom of the screen. Line Out STEP 3: Select "Speaker Configuration", and choose the "2 channels for stereo speakers out put". GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 87
channels to "Line Out", the rear channels to "Line In". STEP 2 : After installation of the audio driver, you'll find an icon on the taskbar's status area. Click the audio icon "Sound Effect" from the windows tray at the bottom of the screen. Line Out Line In STEP 3 : Select "Speaker Configuration - Gigabyte GA-8IK1100 | User Manual - Page 88
taskbar's status area. Click the audio icon "Sound Effect" from the windows tray at the bottom of the screen. Line In STEP 3 : Select "Speaker Configuration", and choose the "6 channels for 5.1 speakers out put". Disable "Only SURROUND-KIT" and pess "OK". GA-8KNXP / GA-8IK1100 Motherboard - 84 - - Gigabyte GA-8IK1100 | User Manual - Page 89
best solution if you need 6 channel output, Line In and MIC at the same time. "SURROUND-KIT" is included in the GIGABYTE unique "Audio Combo Kit" as picture. STEP 1 : Insert the "Audio Combo Kit" in the back of the case, and fix it with the screw. STEP 2 : Connect the "SURROUND-KIT" to SUR_CEN - Gigabyte GA-8IK1100 | User Manual - Page 90
4 : Click the audio icon "Sound Effect" from the windows tray at the bottom Audio Output Mode Notes: When the "Environment settings" is "None", the sound would be performed as stereo mode (2 channels output). Please select the other settings for 6 channels output. GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 91
English SPDIF Output Device (Optional Device) A "S/PDIF output" device is available on the motherboard. Cable with rear bracket is provided and could link to the "S/PDIF output" connector (As picture.) For the further linkage to decoder, rear bracket provides - Gigabyte GA-8IK1100 | User Manual - Page 92
jack, and microphone to MIC In jack. Auto-detecting: Please connect the devices to the right jacks as above. A window will appear as right picture if you setup the devices properly. Please note that 3D audio function will only appear when 3D audio inputs. GA-8KNXP / GA-8IK1100 Motherboard - 88 - - Gigabyte GA-8IK1100 | User Manual - Page 93
English If you set wrong with the connectors, the warning message will come out as right picture. Manual setting: If the device picture shows different from what you set, please press "Manual Selection" to set. - 89 - Technical Reference - Gigabyte GA-8IK1100 | User Manual - Page 94
English GA-8KNXP / GA-8IK1100 Motherboard - 90 - - Gigabyte GA-8IK1100 | User Manual - Page 95
English RCehvaispiotenrH5istAoprypendix Install Drivers Pictures below are shown in Windows XP Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon - Gigabyte GA-8IK1100 | User Manual - Page 96
RAID Driver* For GigaRAID IT8212 RAID IDE controller „ Intel USB 2.0 Driver It is recommended that you use the Microsoft Windows update for the most updated driver for XP/2K For USB2.0 driver support under Windows XP operating system, please use Windows Service Pack. After install Windows Service - Gigabyte GA-8IK1100 | User Manual - Page 97
4 Powerful utility that integrates the overclocking and hardware monitoring functions „ DMI Viewer Windows based utility which is used to browse the DMI/SMBIOS information of the system „ Face-Wizard New utility for adding BIOS logo „ @BIOS Gigabyte windows flash BIOS utility „ Acrobat e-Book Useful - Gigabyte GA-8IK1100 | User Manual - Page 98
English SOFTWARE INFORMATION This page list the contects of softwares and drivers in this CD title. HARDWARE INFORMATION This page lists all device you have for this motherboard. CONTACT US Please see the last page for details. GA-8KNXP / GA-8IK1100 Motherboard - 94 - - Gigabyte GA-8IK1100 | User Manual - Page 99
from Gigabyte Logo Gallery on web site or other compatible picture you have. How does it work? Face-Wizard™ allows user to select BIOS on combine the compatible picture you prefer into BIOS. And not only this, Face-Wizard™ also helps user to update BIOS in windows mode. What's benefit for using Face - Gigabyte GA-8IK1100 | User Manual - Page 100
Powerful utility that integrates the overclocking and hardware monitoring functions 1. Click "EasyTune4" item. (1) 2. Click "Next". (2) 3. Click "Finish" to restart computer. (3) (4) 4. Right Click the icon to start "EasyTune 4". (5) (6) GA-8KNXP / GA-8IK1100 Motherboard - 96 - - Gigabyte GA-8IK1100 | User Manual - Page 101
disk before installing drivers. You also need to go through some rather different steps in the installation process. Therefore, we suggest that you refer to the installation steps in the RAID manual at our website. (Please download it at http://tw.giga-byte.com/support/user_pdf/raid_manual.pdf - Gigabyte GA-8IK1100 | User Manual - Page 102
6 beeps 8042 - gate A20 failure Continuous short beeps: Power error 7 beeps Processor exception interrupt error 8 beeps Display memory read/write failure 9 beeps ROM checksum error 10 beeps CMOS shutdown register read/write error 11 beeps Cache memory bad GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 103
on the RAID mode that you need to set "RAID" to RAID mode or "ATA" to normal ATA mode in the item named RAID controller function. Question 13: How to set in the BIOS to bootup from the IDE/ SCSI/ RAID card ? Answer: Please set in the BIOS as follow: 1. Advanced BIOS features-->(SATA)/RAID/SCSI boot - Gigabyte GA-8IK1100 | User Manual - Page 104
the CPU fan connector. Plug in the AC power connector. Failure has been excluded. No Insert and push the memory module vertically into the DIMM slot. Failure has been excluded. Insert the VGA card. Then plug in ATX power cable and turn on the system. A GA-8KNXP / GA-8IK1100 Motherboard - Gigabyte GA-8IK1100 | User Manual - Page 105
. If the above procedure unable to solve your problem, please contact with your local retailer or national distributor for help. Or, you could submit your question to the service mail via Gigabyte website technical support zone (http://www.gigabyte.com.tw). The appropriate response will be provided - Gigabyte GA-8IK1100 | User Manual - Page 106
Hardware Mfs. Model name Size: Configuration CPU Memory Brand Video Card Audio Card HDD CD-ROM / DVD-ROM Modem Network AMR / CNR Keyboard Mouse Power supply Other Device Phone No.: PCB revision: Driver/Utility: Problem Description: GA-8KNXP / GA-8IK1100 Motherboard - 102 - - Gigabyte GA-8IK1100 | User Manual - Page 107
Acronyms Acronyms ACPI APM AGP AMR ACR BIOS CPU CMOS CRIMM CNR DMA DMI DIMM DRM DRAM DDR ECP ESCD ECC EMC EPP ESD FDD FSB HDD IDE IRQ Meaning Advanced Configuration and Power Interface Advanced Power Management Accelerated Graphics Port Audio Modem Riser Advanced Communications Riser Basic Input - Gigabyte GA-8IK1100 | User Manual - Page 108
Card Operating System Original Equipment Manufacturer PCI A.G.P. Controller Power-On Self Test Peripheral Component Interconnect Rambus in-line Memory Module Special Circumstance Instructions Single Edge Contact Cartridge Static Random Access Memory GA-8KNXP / GA-8IK1100 Motherboard - 104 - - Gigabyte GA-8IK1100 | User Manual - Page 109
- 105 - Memo English - Gigabyte GA-8IK1100 | User Manual - Page 110
English GA-8KNXP / GA-8IK1100 Motherboard - 106 - - Gigabyte GA-8IK1100 | User Manual - Page 111
- 107 - Memo English - Gigabyte GA-8IK1100 | User Manual - Page 112
www.gigabyte.com.cn Beijing Office Tel: 86-10-82856054 86-10-82856064 86-10-82856094 Fax: 86-10-82856575 Web Address: www.gigabyte.com.cn E-mail:[email protected] Chengdu Office Tel: 86-28-85236930 Fax: 86-28-85256822 Web Address: www.gigabyte.com.cn GA-8KNXP / GA-8IK1100 Motherboard - 108
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
 |
 |
When you installing AGP card, please make sure the following notice
is fully understood and practiced.
If your AGP card has "AGP 4X/8X
(1.5V) notch"(show below), please make sure your AGP card is AGP
4X/8X.
Caution: AGP 2X card is not supported by Intel
®
845(GE/PE) / 845(E/G) /
850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system
unable to boot up normally. Please insert an AGP Pro 4X/8X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode
by adjusting the jumper. The factory default for this card is 2X(3.3V).
The GA-8KNXP / GA-8IK1100 (or any AGP Pro 4X/8X only) motherboards
might not function properly, if you install this card without switching the jumper
to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X(3.3V) / 4X(1.5V) mode AGP slot, but they support
2X(3.3V) only. The GA-8KNXP / GA-8IK1100 (or any AGP Pro 4X/8X only)
motherboards might not function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel
®
845(GE/PE) /
845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards.
Before you install PCI cards, please remove the Dual BIOSlabel from PCI
slots if there is one.
AGP 4X/8X notch