Gigabyte GA-990FXA-UD3 R5 Manual
Gigabyte GA-990FXA-UD3 R5 Manual
 |
View all Gigabyte GA-990FXA-UD3 R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte GA-990FXA-UD3 R5 manual content summary:
- Gigabyte GA-990FXA-UD3 R5 | Manual - Page 1
installation resulted from shaking. Step 1 Installing a CPU and CPU Cooler A. Installing an Intel CPU (skip this step if the motherboard has a built-in CPU) A-1 Refer to the following instructions based on your CPU specifications: •• Type A: Lift the CPU socket lever and the metal load plate - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 2
B. Installing an AMD CPU (skip this step if the motherboard has a built-in CPU) B-1 Completely raise the CPU socket lever. Align the CPU pin one (small triangle marking) with the triangle marking on the CPU socket and gently insert the CPU into the socket. Make sure that the CPU pins fit perfectly - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 3
motherboard with their corresponding mounting holes on the case. Secure the motherboard in place with screws. I/O Shield Step 5 Installing an Expansion Card Locate an expansion slot that supports with screws. Installing a Hard Drive •• One motherboard IDE connector can connect up to two IDE - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 4
: Reset Switch CI: Chassis Intrusion Header (Note) The pin assignments for the front panel header may differ by model. Refer to the motherboard user's manual for the actual pin assignments. Step 8 Connecting Peripherals Back Panel of the Case Power Supply PS/2 Keyboard Port DVI-D Port HDMI Port - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 5
d dසԶਞϽf f d f d d d d d l d f ᐿ Ӊ 1 CPU ʕ ˖ A. Intel CPU CPUd A-1 CPU j • ᅵόɓj ਗ਼CPU dCPU f a CPUౢᅻɪd f b d d CPU f • ᅵόɚj A d B d f Ad d f זA זB A-2 CPUdਗ਼CPU CPU CPU f A-3 ᆽ֛CPU d d f ᅵόɚٙCPU d B d f A f ༉ٙCPU f - 1 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 6
B. AMD CPU CPUd B-1 ਗ਼CPU dਗ਼CPU CPU dΎਗ਼CPU d f CPU B-2 ᆽ֛CPU dɓ˓ܲИCPUʕගٙЗ ᐿ ໄd f CPU ౢᅻ ʕ ˖ CPUЇCPUౢᅻd dCPU d f CPU f CPUౢᅻd CPUࣛd f C C-1 d CPUࠦڌfટ ഹਗ਼CPU f f) C-2 CPU_FANౢࢭd CPU d CPUf Ӊ 2 d d d d d f d dʚ ˸ո֛f Ӊ 3 d d f d f - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 7
Ӊ 4 I/O d I/O᚛˪f d͍ᆽ࿁ՑI/O᚛˪ٙЗໄd d f ᐿ ʕ I/O᚛˪ ˖ Ӊ 5 d d f PCI Express ᜑͪ̔ f f Ӊ 6 τༀIDE/SATAண௪ 6-1 DVD-ROM/CD-ROM 5.25Ρኺؐf d f 6-2 IDEʿSATA d Зd f • ɓࡈIDE IDEண௪d IDE MasterʿSlave)f dሗίBIOS f - 3 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 8
Ӊ 7 e 7-1 dԷνIDEરᇞeSATAરᇞe eUSBౢࢭ ʿIEEE 1394ౢࢭnഃf 7-2 d e ͪዱeఆ̪e e F_PANEL)f ᐿ ટ໔່֛Aj ટ໔່֛Bj MSGj ʕ ˖ +MSG- +PW- 2 1 +SPEAK- +MSG- +PW- +SPEAK- 20 19 PWRj PWj SPEAKjఆ̪ટ໔ HDj +HD- -RES+ NC +HD- -RES+ -CI+ +PWR- RESj CIj d f Ӊ 8 DVI-Dౢࢭ HDMIౢࢭ - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 9
步骤 1 CPU A. Intel CPU CPU A-1 CPU 将CPU CPU a CPU 简 b 体 CPU 中 文 A B A 拉杆 A 拉杆 B A-2 CPU，将 CPU CPU CPU A-3 确定 CPU CPU B A 详细的 CPU - 1 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 10
B. AMD CPU CPU B-1 将 CPU CPU CPU CPU CPU B-2 确定 CPU CPU CPU 插槽 CPU至CPU CPU CPU CPU CPU C C-1 CPU CPU C-2 CPU_FAN CPU CPU。 步骤 2 步骤 3 - 2 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 11
步骤 4 I/O I/O I/O I/O挡板铁片 步骤 5 PCI Express 显卡 简 体 中 文 步骤 6 安装IDE/SATA设备 6-1 DVD-ROM/CD-ROM 5.25 安装光驱 6-2 IDE及SATA 安装硬盘 • 一个IDE IDE IDE Master及Slave BIOS - 3 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 12
步骤 7 7-1 IDE排线、SATA USB 插座及IEEE 1394 7-2 (F_PANEL)。 接脚定义A： +MSG- +PW- +SPEAK- 2 1 +HD- -RES+ NC 接脚定义B： +MSG- +PW- +SPEAK- +HD- -RES+ -CI+ 20 19 +PWR- MSG PWR PW SPEAK HD RES CI 步骤 简 8 体 中 文 键盘插座 DVI-D插座 HDMI插座 D-Sub插座 eSATA插座 S/ - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 13
GIGABYTE εςοϓ 1 CPU ͓Αͼ CPU A. Intel CPU CPU A-1 CPU • λΠϓAɿ CPU a. CPU b CPUΛૠೖͨ͠ • λΠϓBɿ ϨόʔA B A ϨόʔA ϨόʔB ຊ ޠ A-2 CPU CPU ϐϯ 1 CPU 1 CPU CPU A-3 CPU CPU B B A CPU CPU - 1 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 14
B. AMD CPU CPU B-1 CPU CPU ϐ ϯ1 CPU CPU CPU ࠐΈ·͢ɻCPU B-2 CPU 1ຊͷࢦ Λ CPU CPU ιέοτ ϐϯ1 • CPU Λ CPU CPU CPU CPU CPU C. CPU C-1 CPU CPU CPU C-2 CPU CPU_FAN εςοϓ 2 ຊ ޠ εςοϓ 3 ྫͱͯ͠G I G A B Y T E - 2 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 15
εςοϓ 4 I/O I/O I/O I/Oγʔϧυ εςοϓ 5 PCI Express εςοϓ 6 IDEͱSATA 6-1 DVD-ROM CD-ROM 5.25z 5.25z υϥ ຊ ޠ 6-2 IDE ͱ SATA • 1ͭͷIDE 2ͭͷIDE IDE BIOS - 3 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 16
εςοϓ 7 7-1 IDE/SATA USBɺIEEE 1394 7-2 MSG LEDɺHDD LED A: +MSG- +PW- +SPEAK- 2 1 +HD- -RES+ NC B: +MSG- +PW- +SPEAK- +HD- -RES+ -CI+ +PWR- MSG LED PWR LED 20 PW 19 SPEAK HD: HDD LED RES CI εςοϓ 8 PS/2 DVI-D ϙʔτ HDMI ϙʔτ eSATA ϙʔτ IEEE1394 ϙʔτ ຊ - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 17
GIGABYTE 단계 1 CPU 및 CPU A. Intel CPU CUP A-1 CPU • 타입 A: CPU a CPU 십시오. b CPU CPU • 타입 B: 레버 A 버 B A 레버 A 레버 B 영어 A-2 CPU CPU 핀 1 CPU 1 CPU CPU A-3 CPU CPU B B A CPU CPU - 1 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 18
B. AMD CPU CUP B-1 CPU CPU 핀 1 CPU CPU CPU CPU B-2 CPU CPU CPU CPU 소켓 핀 1 • CPU 소켓에 CPU CPU CPU CPU CPU C. CPU C-1 CPU CPU CPU C-2 CPU CPU CPU_FAN 단계 2 영어 단계 3 GIGABYTE - 2 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 19
단계 4 I/O I/O I/O I/O 쉴드 단계 5 PCI Express 단계 6 IDE 장치 및 SATA 6-1 DVD-ROM 과 CD-ROM 5.25 5.25 6-2 IDE 및 SATA IDE 2 대의 IDE IDE 2 BIOS 영어 - 3 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 20
단계 7 7-1 IDE/SATA USB, IEEE 1394 7-2 F_PANEL 핀 지정 A: +MSG- +PW- +SPEAK- 2 1 +HD- -RES+ NC 핀 지정 B: +MSG- +PW- +SPEAK- 20 19 +HD- -RES+ -CI+ +PWR- MSG LED PWR: 전원 LED PW SPEAK: 스피커 HD LED RES CI 단계 8 PS/2 DVI-D 포트 HDMI 포트 eSATA 포트 IEEE1394 PS/2 - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 21
ng dẫn cài đặt dưới đây áp dụng cho các hệ thống màn hình nền của GIGABYTE và chỉ để tham khảo. • Tham khảo sổ tay hướng dẫn sử dụng để bi CPU vào. Ấn thanh gài A (gần dấu " ") xuống và trượt ra khỏi socket để tháo thanh gài này ra. Sau đó ấn thanh gài B (gần dấu " ") xuống và trượt ra khỏi socket - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 22
Lắp CPU của AMD (bỏ qua bước này nếu bo mạch chủ có một CPU dựng sẵn) B-1 Nâng hết cần đẩy đế cắm CPU. Canh thẳng chân cắm 1 trên CPU (đánh dấu tam giác nhỏ) với tam giác có đánh dấu trên đế cắm CPU và lắp nhẹ CPU vào đế cắm. Đảm bảo các chân cắm CPU khít hoàn toàn vào các lỗ. Cần đẩy đế cắm CPU - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 23
cứng • Một đầu cắm IDE trên bo mạch chủ có thể kết nối với hai thiết bị IDE. Trước khi lắp đặt, kiểm tra cài đặt cầu nối nhảy cóc (chính và phụ) trên các thiết bị IDE của bạn. • Nếu đã cài đặt hơn một ổ đĩa cứng, vào Cài đặt BIOS trên máy để cài đặt trình tự khởi động ổ đĩa cứng. Việt ngữ - 3 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 24
Bước 7 Cắm Cáp Vào Các Đầu Cắm Bên Trong 7-1 Cắm cáp vào các đầu cắm và bộ tích điện bên trong trên bo mạch chủ gồm các đầu cắm IDE/SATA và bộ tích điện âm thanh mặt trước, USB, IEEE 1394, v.v... 7-2 Gắn thanh mặt trước (khác nhau tùy theo kiểu thùng máy gồm đèn báo nguồn, đèn báo hoạt động của ổ - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 25
GIGABYTE dan hanya untuk rujukan saja. •• Silahkan merujuk kepada manual pengguna yang disertakan untuk mendapatkan spesifikasi motherboard dari pelat beban secara otomatis selama proses pemasangan kembali tuas setelah Anda memasukkan CPU. •• Tipe B: Dorong tuas A (paling dekat dengan tanda " ") - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 26
CPU AMD (lewati langkah ini jika motherboard memiliki CPU bawaan) B-1 Angkat tinggi-tinggi tuas soket CPU. Sejajarkan pin satu CPU (tanda segitiga kecil) dengan tanda segitiga pada soket CPU dan secara perlahan masukan CPU pada soket. Pastikan bahwa pin CPU sistem desktop GIGABYTE sebagai contoh - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 27
lubang pemasangan pada motherboard dengan lubangnya yang sesuai pada casing. Kencangkan motherboard pada tempatnya dengan casing dan eratkan dengan sekrup. Memasang Hard Drive •• Satu penghubung IDE motherboard dapat menghubungkan sampai dua perangkat IDE. Sebelum dipasang, periksa setelan jumper ( - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 28
daya, indikator aktivitas hard drive, pengeras suara, saklar reset, saklar daya, dll.) dari casing ke kepala panel depan dari koneksi (F_PANEL) pada motherboard. Kepala Panel Depan Penempatan Pin A: +MSG- +PW- +SPEAK- 2 1 +HD- -RES+ NC Penempatan Pin B: +MSG- +PW- +SPEAK- 20 19 +HD- -RES+ -CI - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 29
ไทย GIGABYTE 1 CPU CPU A CPU ของ Intel Built-in CPU) A-1 CPU A CPU a CPU b CPU B A B A A B A-2 ถ อื CPU CPU CPU CPU CPU A-3 CPU CPU B B A CPU CPU - 1 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 30
B CPU ของ AMD Built-in CPU) B-1 CPU CPU CPU CPU CPU CPU ไทย B-2 CPU CPU CPU พิน 1 CPU CPU CPU CPU CPU CPU C CPU C-1 CPU CPU CPU C-2 CPU CPU_FAN CPU 2 3 GIGABYTE - 2 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 31
ไทย 4 I/O I/O I/O I/O 5 PCI 6 IDE และ SATA 6-1 DVD-ROM และ CD-ROM 5.25 5.25 6-2 IDE และ SATA IDE IDE ได้ 2 IDE BIOS - 3 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 32
ไทย 7 7-1 IDE/SATA USB, IEEE 1394, ฯลฯ 7-2 F_PANEL A: +MSG- +PW- +SPEAK- 2 1 +HD- -RES+ NC B: +MSG- +PW- +SPEAK- +HD- -RES+ -CI+ +PWR- MSG: LED PWR: LED PW 20 SPEAK 19 HD: LED RES CI 8 PS/2 DVI-D HDMI eSATA PS/2 D-Sub S/PDIF IEEE - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 33
7 1-7 IDE/SATA USB 2-7 :MSG :PWR +MSG- +PW- +SPEAK- +MSG- +PW- +SPEAK :PW :SPEAK 20 2 :HD 19 1 :RES CI +HD- -RES+ -CI+ +PWR- +HD- -RES NC 8 Power Supply 2/PS DVI-D - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 34
4 I/O shield I/O Shield 5 case PCI Express 6 1-6 DVD-ROMو CD-ROM 2-6 IDEو SATA IDE IDE Jumper BIOS - 3 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 35
.B AMD 1-B 2-B 1-C 2-C .C 2 3 GIGABYTE Power Supply - 2 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 36
GIGABYTE 1 .A Intel 1-A A a b B B A 2-A socket CPU socket 3-A B - 1 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 37
گام 1-7 IDE/SATA USB IEEE1394 2-7 F_PANEL LED :MSG B A LED :PWR +MSG- +PW- +SPEAK- +MSG- +PW +SPEAK- :PW 20 2 :SPEAK 19 1 LED :HD RES +HD- -RES+ -CI+ +PWR- +HD- -RES NC :CI گام - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 38
گام I/O PCI Express گام IDEو SATA 1-6 DVD-ROM CD-ROM 5.25 5.25 2-6 IDEيا SATA 3.5 IDE Master Slave IDE BIOS - 3 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 39
.B AMD 1-B 2-B CPU 1-C 2-C CPU_FAN .C گام گام GIGABYTE - 2 - - Gigabyte GA-990FXA-UD3 R5 | Manual - Page 40
GIGABYTE گام .A 1-A CPU A CPU a CPU b CPU B A B A B A 2-A 3-A B B A CPU CPU - 1 -
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
- 1 -
English
Step
1
Installing a CPU and CPU Cooler
A. Installing an Intel CPU (skip this step if the motherboard has a built-in CPU)
•
The sequence of installation may differ depending on the type of case and devices used. The
installation instructions below apply to GIGABYTE's desktop systems and are for reference
only.
•
Refer to the user's manual included for detailed motherboard specifications.
•
Before installing the devices, make sure they are compliant with the connectors on your computer.
•
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord
from the power outlet to prevent damage to the devices and the system components.
•
Place the computer system on a stable surface to prevent improper installation resulted from shaking.
•
Type B:
Push lever A (closest to the "
" marking) down and away from the socket to release it. Then push
lever B (closest to the "
" marking) down and away from the socket and lift it. Gently press lever A to
allow the load plate to rise. Open the load plate.
A-1 Refer to the following instructions based on your CPU specifications:
•
Type A:
Lift the CPU socket lever and the metal load plate will be lifted as well.
a. If the protective socket cover is fastened on the CPU socket, remove
it first.
b. If the protective socket cover is fastened on the metal load plate, do
not remove it at this stage. The socket cover may pop off from the
load plate automatically during the process of re-engaging the lever
after you insert the CPU.
For detailed instructions on installing the CPU, please refer to the user’s manual.
Lever A
Lever B
A-2 Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle) with the pin
one corner of the CPU socket (or you may align the CPU notches with the socket alignment keys) and
gently insert the CPU into position.
A-3
Once the CPU is properly inserted, replace the load plate and push the CPU socket lever back into its locked position.
Once the type B is properly inserted, carefully replace the load plate. Then secure lever B under its retention
tab. The socket cover may pop off from the load plate during the process of engaging the lever. Finally,
secure lever A under its retention tab to complete the installation of the CPU.