Gigabyte GA-B75-D3V User Manual
Gigabyte GA-B75-D3V Manual
 |
View all Gigabyte GA-B75-D3V manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte GA-B75-D3V manual content summary:
- Gigabyte GA-B75-D3V | User Manual - Page 1
GA-B75-D3V User's Manual Rev. 1001 12ME-B75D3V-1001R - Gigabyte GA-B75-D3V | User Manual - Page 2
Motherboard GA-B75-D3V Feb. 17, 2012 Motherboard GA-B75-D3V Feb. 17, 2012 - Gigabyte GA-B75-D3V | User Manual - Page 3
Installation Guide included with the product. „„ For detailed product information, carefully read the User's Manual. For product-related information, check on our website at: http://www.gigabyte.com Identifying Your Motherboard Revision The revision number on your motherboard looks like this: "REV - Gigabyte GA-B75-D3V | User Manual - Page 4
Optional Items...6 GA-B75-D3V Motherboard Layout 7 GA-B75-D3V Motherboard Block Diagram 8 Chapter 1 Hardware Installation 9 1-1 Installation Precautions 9 1-2 Product Specifications 10 1-3 Installing the CPU and CPU Cooler 13 1-3-1 Installing the CPU 13 1-3-2 Installing the CPU Cooler 15 - Gigabyte GA-B75-D3V | User Manual - Page 5
51 3-1 Installing Chipset Drivers 51 3-2 Application Software 52 3-3 Technical Manuals 52 3-4 Contact...53 3-5 System...53 3-6 Download Center 54 3-7 New Program 54 Chapter 4 Unique Features 55 4-1 Xpress Recovery2 55 4-2 BIOS Update Utilities 58 4-2-1 Updating the BIOS with the Q-Flash - Gigabyte GA-B75-D3V | User Manual - Page 6
Box Contents GA-B75-D3V motherboard Motherboard driver disk User's Manual Quick Installation Guide Two SATA 6Gb/s cables I/O Shield The box contents above are for reference only and the actual items shall depend on the product package you obtain. - Gigabyte GA-B75-D3V | User Manual - Page 7
GA-B75-D3V Motherboard Layout VGA KB_MS_USB ATX_12V LGA1155 DVI ATX SYS_FAN2 R_USB30 USB_LAN AUDIO PCIEX1_1 Atheros GbE LAN PCIEX16 PCIEX1_2 CODEC PCIEX1_3 PCIEX4 PCI1 iTE Super I/O PCI2 SPDIF_O SYS_FAN3 CPU_FAN mSATA GA-B75-D3V F_USB30 DDR3_4 DDR3_2 DDR3_3 DDR3_1 Intel® B75 - Gigabyte GA-B75-D3V | User Manual - Page 8
/s 1 mSATA 8 USB 2.0/1.1 CODEC 4 USB 3.0 (Note 2)/2.0 LPC Bus iTE Super I/O COM PS/2 KB/Mouse MIC (Center/Subwoofer Speaker Out) Line Out (Front Speaker Out) Line In (Rear Speaker Out) S/PDIF Out 2 PCI (Note 1) To support DDR3 1600 MHz, you must install an Intel 22nm (Ivy Bridge) CPU. (Note - Gigabyte GA-B75-D3V | User Manual - Page 9
discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: •• Prior to installation, make sure the chassis is suitable for the motherboard. •• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty sticker provided - Gigabyte GA-B75-D3V | User Manual - Page 10
CPU ŠŠ Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 package (Go to GIGABYTE's website for the latest CPU support list.) ŠŠ L3 cache varies with CPU Chipset ŠŠ Intel® B75 - Gigabyte GA-B75-D3V | User Manual - Page 11
4 x SATA 3Gb/s connectors (SATA2 1~4) supporting up to 4 SATA 3Gb/s devices - 1 x mSATA connector Chipset: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB headers) * In Windows XP, the Intel USB 3.0 ports can support up to USB 2.0 transfer speed - Gigabyte GA-B75-D3V | User Manual - Page 12
(OEM version) Intel® Rapid Start Technology Intel® Smart Connect Technology Intel® Small Business Advantage Support for Microsoft® Windows 7/XP Form Factor ŠŠ ATX Form Factor; 30.5cm x 21.5cm * GIGABYTE reserves the right to make any changes to the product specifications and product-related - Gigabyte GA-B75-D3V | User Manual - Page 13
before you begin to install the CPU: •• Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. •• Locate the - Gigabyte GA-B75-D3V | User Manual - Page 14
B. Follow the steps below to correctly install the CPU into the motherboard CPU socket. Before installing the CPU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the CPU. Step 1: Gently press the CPU socket lever handle down and away from the - Gigabyte GA-B75-D3V | User Manual - Page 15
below to correctly install the CPU cooler on the motherboard. (The following procedure uses Intel® boxed cooler as the example (Refer to your CPU cooler installation manual for instructions on installing the cooler.) Step 5: After the installation, check the back of the motherboard. If the push - Gigabyte GA-B75-D3V | User Manual - Page 16
motherboard provides four DDR3 memory sockets and supports Dual Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications "- -"=No Memory) DDR3_4 DDR3_2 DDR3_3 DDR3_1 Due to CPU limitations, read the following guidelines before installing the memory in - Gigabyte GA-B75-D3V | User Manual - Page 17
to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this motherboard. Notch DDR3 DIMM A DDR3 memory module has a notch, so it can only fit in one direction. Follow the steps below to correctly install your memory - Gigabyte GA-B75-D3V | User Manual - Page 18
install an expansion card: •• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. •• . If necessary, go to BIOS Setup to make any required BIOS changes for your expansion card(s). 7. Install the driver provided with the expansion card - Gigabyte GA-B75-D3V | User Manual - Page 19
supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification. Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. RJ-45 LAN Port The Gigabit Ethernet LAN feature through the audio driver. Refer to the instructions on setting up a - Gigabyte GA-B75-D3V | User Manual - Page 20
3 4 14 8 12 1) ATX_12V 2) ATX 3) CPU_FAN 4) SYS_FAN1/2/3 5) BAT 6) SATA3 0 7) SATA2 1/2/3/4 8) mSATA 6 7 9 11 4 15 4 13 5 10 9) CLR_CMOS 10) F_PANEL 11) F_AUDIO 12) SPDIF_O 13) F_USB1/ cable has been securely attached to the connector on the motherboard. Hardware Installation - 20 - - Gigabyte GA-B75-D3V | User Manual - Page 21
supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is the correct orientation. The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the computer will - Gigabyte GA-B75-D3V | User Manual - Page 22
(Fan Headers) All fan headers on this motherboard are 4-pin. Most fan headers possess a CPU or the system may hang. •• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers. 5) BAT (Battery) The battery provides power to keep the values (such as BIOS - Gigabyte GA-B75-D3V | User Manual - Page 23
PORT DEBUG PORT DEBUG PORT DEBUG PORT 7) SATA2 1/2/3/4 (SATA 3Gb/s Connectors, Controlled by Intel B75 Chipset) The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. SATA2 1 1 1 1 71 72 73 74 Pin No - Gigabyte GA-B75-D3V | User Manual - Page 24
Drive Connector, Controlled by the Intel B75 Chipset) The mSATA connector conforms to SATA 3Gb/s standard and can connect to a single solid-state drive. DB_PORT BIOS Switcher (X58A-OC) 1 M_SATA Voltage measurement module(X58A-OC) PWM Switch (X58A-OC) mSATA ACPI_CPT (GA-IVB) DIP 1 23 1 DIP - Gigabyte GA-B75-D3V | User Manual - Page 25
beep code. One single short beep will be heard if no problem is detected at system startup. If a problem is detected, the BIOS may issue beeps in different patterns to indicate the problem. Refer to Chapter 5, "Troubleshooting," for information about beep codes. •• HD (Hard Drive Activity LED, Blue - Gigabyte GA-B75-D3V | User Manual - Page 26
) The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect your chassis front panel audio module to this header. Make sure the wire assignments of the module connector match the pin assignments of the motherboard header. Incorrect connection between the - Gigabyte GA-B75-D3V | User Manual - Page 27
) F_USB30 (USB 3.0/2.0 Header) The header conforms to USB 3.0/2.0 specification and can provide two USB ports. For purchasing the optional 3.5" 9 10 Definition VBUS SSRX1SSRX1+ GND SSTX1SSTX1+ GND D1D1+ NC DB_PORT 1 BIOS Switc 1 1 Pin No. Definition 11 VoltDag2e+measurement module(X58A-OC) 12 - Gigabyte GA-B75-D3V | User Manual - Page 28
DB_PORT 15) TPM (Trusted Platform Module Header) You may connect a TPM (Trusted Platform Module) to this header. 19 TPM w/housing 20 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition LCLK GND LFRAME No Pin LRESET NC LAD3 LAD2 VCC3 LAD1 1 Voltage measurement module(X58A-OC) 2 Pin No. 11 12 13 14 15 16 - Gigabyte GA-B75-D3V | User Manual - Page 29
the GIGABYTE Q-Flash or @BIOS utility. •• Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system. •• @BIOS is a Windows-based utility that searches and downloads the latest version of BIOS from the Internet and updates the BIOS. For instructions - Gigabyte GA-B75-D3V | User Manual - Page 30
INFORMATION Press the key to display your system information. : BOOT MENU Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use the up arrow key or the down arrow key to select the first boot device, then press to accept - Gigabyte GA-B75-D3V | User Manual - Page 31
value or make changes / Decrease the numeric value or make changes Restore the previous BIOS settings for the current submenus Load the Optimized BIOS default settings for the current submenus Access the Q-Flash utility Display system information - Gigabyte GA-B75-D3V | User Manual - Page 32
the SATA ports. „„ BIOS Features Use this menu to configure the device boot order, advanced features available on the CPU, and the primary display adapter. „„ Peripherals Use this menu to configure all peripheral devices, such as SATA, USB, integrated audio, and integrated LAN - Gigabyte GA-B75-D3V | User Manual - Page 33
overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users provides information on the BIOS version, CPU base clock, CPU frequency, memory frequency, total memory size , CPU temperature, Vcore, and memory voltage. - Gigabyte GA-B75-D3V | User Manual - Page 34
/PCIe Base Clock Allows you to manually set the CPU base clock and PCIe bus frequency in 0.01 MHz increments. (Default: Auto) Important: It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. && Internal Graphics Clock Allows you to set the onboard graphics - Gigabyte GA-B75-D3V | User Manual - Page 35
according to the CPU specifications. (Default: Auto) && CPU Core Enabled (Note) Allows you to determine whether to enable all CPU cores. Auto lets the BIOS automatically configure this setting. (Default: Auto) (Note) This item is present only when you install a CPU that supports this feature. For - Gigabyte GA-B75-D3V | User Manual - Page 36
. This feature only works for operating systems that support multi-processor mode. Auto lets the BIOS automatically configure this setting. (Default: Auto) && CPU Enhanced Halt (C1E) (Note 1) Enables or disables Intel CPU Enhanced Halt (C1E) function, a CPU power-saving function in system halt state - Gigabyte GA-B75-D3V | User Manual - Page 37
Profile VTT Voltage The value displayed here is dependent on the CPU being used. && Channel Interleaving Enables or disables memory channel interleaving BIOS automatically configure this setting. (Default: Auto) (Note) This item is present only when you install a CPU and a memory module that support - Gigabyte GA-B75-D3V | User Manual - Page 38
board to default values by loading optimized defaults or clearing the CMOS values. `` Advanced Voltage Settings This sub-menu allows you to set memory voltage. BIOS Setup - 38 - - Gigabyte GA-B75-D3V | User Manual - Page 39
`` PC Health Status && Reset Case Open Status Disabled Keeps or clears the boot. && Case Opened Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will - Gigabyte GA-B75-D3V | User Manual - Page 40
speed control function and adjust the fan speed. Normal Allows the CPU fan to run at different speeds according to the CPU temperature. (Default) Silent Allows the CPU fan to run at slow speeds. Manual Allows you to control the CPU fan speed under the Slope PWM item. Disabled Allows the - Gigabyte GA-B75-D3V | User Manual - Page 41
allows you to make changes to all BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all. `` ATA Port Information This section provides information on the device connected to each SATA port controlled by Intel B75 Chipset. You can enable/disable each SATA - Gigabyte GA-B75-D3V | User Manual - Page 42
/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives, and devices that support Boot from LAN function, etc. Press on this item to enter the submenu that presents the devices - Gigabyte GA-B75-D3V | User Manual - Page 43
systems. (Default: Disabled) && VT-d (Note) Enables or disables Intel Virtualization Technology for Directed I/O. (Default is present only when you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. - 43 - BIOS Setup - Gigabyte GA-B75-D3V | User Manual - Page 44
Boot Option ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) && SATA Controller(s) Enables or disables the integrated SATA controllers. (Default mode. IDE Configures the SATA controller to IDE mode. (Default) BIOS Setup - 44 - - Gigabyte GA-B75-D3V | User Manual - Page 45
controller in OS. Smart Auto This mode is available only when the BIOS supports the xHCI controller in the pre-boot environment. This mode is similar to support, devices may require UASP class driver updates from UASP driver vendors to be fully compatible with Intel USB 3.0 Streams Support. - Gigabyte GA-B75-D3V | User Manual - Page 46
Specifes the frst initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card, or the onboard graphics. Auto Lets BIOS system that does not natively support USB devices. (Default: Disabled) && USB Storage Devices Displays a list of connected USB mass storage - Gigabyte GA-B75-D3V | User Manual - Page 47
`` Trusted Computing && TPM SUPPORT Enables or disables Trusted Platform Module (TPM). Set this item to Enabled when a TPM device is installed. (Default: Disabled) && OnBoard LAN Controller#1 Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in - Gigabyte GA-B75-D3V | User Manual - Page 48
set the date and time as following: Wake up day: Turn on the system at a specific time on each day or on a specific day in a month. Wake up hour/minute/second: Set the time will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN. BIOS Setup - 48 - - Gigabyte GA-B75-D3V | User Manual - Page 49
consumption. (Default: Enabled) && Internal Graphics Deep Standby Mode Allows you to determine whether to let the onboard graphics enter deeper standby mode. (Default: Enabled) (Note) Supported on Windows 7 operating system only. - 49 - BIOS Setup - Gigabyte GA-B75-D3V | User Manual - Page 50
Yes to confirm. Your system will restart automatically and boot from that device. && Save Profiles This function allows you to save the current BIOS settings to a profile. You can create up to 4 profiles and save as Setup Profile 1~ Setup Profile 4. Press to complete. && Load Profiles If - Gigabyte GA-B75-D3V | User Manual - Page 51
new GIGABYTE utilities. Click Yes to automatically install the utilities. Or click No if you want to manually select the utilities to install on the Application Software page later. •• For USB 2.0 driver support under the Windows XP operating system, please install the Windows XP Service Pack - Gigabyte GA-B75-D3V | User Manual - Page 52
applications that GIGABYTE develops and some free software. You can click the Install button on the right of an item to install it. 3-3 Technical Manuals This page provides GIGABYTE's application guides, content descriptions for this driver disk, and the motherboard manuals. Drivers Installation - Gigabyte GA-B75-D3V | User Manual - Page 53
3-4 Contact For the detailed contact information of the GIGABYTE Taiwan headquarter or worldwide branch offices, click the URL on this page to link to the GIGABYTE website. 3-5 System This page provides the basic system information. - 53 - Drivers Installation - Gigabyte GA-B75-D3V | User Manual - Page 54
To update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE website. The latest version of the BIOS, drivers, or applications will be displayed. 3-7 New Program This page provides a quick link to GIGABYTE's lately developed utilities for users to install - Gigabyte GA-B75-D3V | User Manual - Page 55
back up your system soon after the operating system and drivers are installed. •• The amount of data and hard drive file created with Xpress Recovery cannot be restored using Xpress Recovery2. •• USB hard drives are not supported. •• RAID drives are not supported. •• GPT partitions are not supported - Gigabyte GA-B75-D3V | User Manual - Page 56
along the top). Please note that if there is no enough unallocated space, Xpress Recovery2 cannot save the backup file. B. Accessing Xpress Recovery2 Boot from the motherboard driver disk to access Xpress Recovery2. When you see the following message: Press any key to startup Xpress Recovery2 - Gigabyte GA-B75-D3V | User Manual - Page 57
present if no backup is created before. E. Removing the Backup Step 1: If you wish to remove the backup file, select REMOVE. Step 2: After the backup file is removed, no backup image file will be present in Disk Management and hard drive space will be freed up. F. Exiting Xpress Recovery2 Select - Gigabyte GA-B75-D3V | User Manual - Page 58
@BIOS will download the latest BIOS file from the nearest @BIOS server site 4-2-1 Updating the BIOS with the Q-Flash Utility A. Before You Begin 1. From GIGABYTE's website, download the latest compressed BIOS update file that matches your motherboard model. 2. Extract the file and save the new BIOS - Gigabyte GA-B75-D3V | User Manual - Page 59
Model Name : B75-D3V BIOS Version : F1g BIOS Date : 01/31/2012 Flash Type/Size : MXIC 25L6465E/6406E 8MB Update BIOS From Drive SaSveeleBcItODSetvoicDe rive Return to BIOS setup Flash Disk 3. Select the BIOS update file. Make sure the BIOS update file matches your motherboard model. Step 2: The - Gigabyte GA-B75-D3V | User Manual - Page 60
Optimized Defaults on the Save & Exit screen and press to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, so we recommend that you reload BIOS defaults. Select Yes to load BIOS defaults Step 5: Select Save & Exit Setup and press . And then select - Gigabyte GA-B75-D3V | User Manual - Page 61
your location and then download the BIOS file that matches your motherboard model. Follow the on-screen instructions to complete. If the BIOS update file for your motherboard is not present on the @BIOS server site, please manually download the BIOS update file from GIGABYTE's website and follow - Gigabyte GA-B75-D3V | User Manual - Page 62
configuring your LAN connection settings and Q-Share, you are able to share your data with computers on the same network, making full use of Internet resources. Directions for using Q-Share After installing Q-Share from the motherboard driver disk, go to Start>All Programs>GIGABYTE>Q-Share.exe - Gigabyte GA-B75-D3V | User Manual - Page 63
Auto Green is an easy-to-use tool that provides users with simple options to enable system power savings via a Bluetooth Suspend to RAM mode Disables this function The Bluetooth dongle included in the motherboard package(Note 2) allows you to wake up the system from Suspend to RAM mode without - Gigabyte GA-B75-D3V | User Manual - Page 64
system memory 3. Intel Rapid Start Technology enabled in BIOS Setup 4. AHCI/RAID mode supported (please note if the SSD has been assigned as a member of a RAID array, it cannot be used to set up Intel Rapid Start store partition); IDE mode not supported 5. All motherboard drivers correctly installed - Gigabyte GA-B75-D3V | User Manual - Page 65
Go to the Peripherals menu and set Intel Rapid Start Technology to Enabled. 2. Save the settings and exit BIOS Setup. E. Installing and Configuring the Intel Rapid Start Application 1. While in the operating system, insert the motherboard driver disk, go to Application Software\Install Application - Gigabyte GA-B75-D3V | User Manual - Page 66
computer is waked up. A. System Requirements 1. Intel Smart Connect Technology enabled in BIOS Setup 2. Windows 7 with SP1 3. Normal network connection B. Configuring Intel Smart Connect Technology Step 1: After installing the operating system and motherboard drivers, install the Intel Smart Connect - Gigabyte GA-B75-D3V | User Manual - Page 67
Smart Connect Technology. On the Intel® Smart Connect Technology Configuration menu, click Enable Updating on the Basic tab. (The Enable Updating button has now changed to Disable Updating.) On this menu, the user can set the update frequency to 5 to 60 minutes. (Default: 15 minutes) The Advanced - Gigabyte GA-B75-D3V | User Manual - Page 68
Small Business Advantage) A. System Requirements 1. An Intel B75 Chipset motherboard 2. An Intel Core series processor 3. Windows 7 with SP1 4. All motherboard drivers correctly installed B. Installation 1. While in the operating system, insert the motherboard driver disk, go to Application Software - Gigabyte GA-B75-D3V | User Manual - Page 69
you want to mute the back panel audio (only supported when using an HD front panel audio module), refer to instructions on page 71. High Definition Audio (HD Audio) HD Audio includes multiple high quality digital-to-analog converters (DACs) that support 44.1KHz/48KHz/ 96KHz/192KHz sampling rate. HD - Gigabyte GA-B75-D3V | User Manual - Page 70
you connect. Then click OK. Side Speaker Out Step 3: On the Speakers screen, click the Speaker Configuration tab. In the Speaker Configuration list, select Stereo, Quadraphonic, 5.1 Speaker, or 7.1 Speaker according to the type of speaker configuration you wish to set up. Then the speaker setup - Gigabyte GA-B75-D3V | User Manual - Page 71
C. Activating an AC'97 Front Panel Audio Module If your chassis provides an AC'97 front panel audio module, to activate the AC'97 functionality, click the tool icon on the Speaker Configuration tab. On the Connector Settings dialog box, select the Disable front panel jack detection check box. Click - Gigabyte GA-B75-D3V | User Manual - Page 72
5-1-3 Configuring Microphone Recording Step 1: After installing the audio driver, the HD Audio Manager icon will appear in the notification area. Double-click the icon to access the HD Audio Manager. Step 2: Connect your microphone - Gigabyte GA-B75-D3V | User Manual - Page 73
Step 5: After completing the settings above, click Start, point to All Programs, point to Accessories, and then click Sound Recorder to begin the sound recording. * Enabling Stereo Mix If the HD Audio Manager does not display the recording device you wish to use, refer to the steps below. The - Gigabyte GA-B75-D3V | User Manual - Page 74
record the audio, click the Start Recording button . 333 To stop recording audio, click the Stop Recording button . Be sure to save the recorded audio file upon completion. B. Playing the Recorded Sound You can play your recording in a digital media player program that - Gigabyte GA-B75-D3V | User Manual - Page 75
to the instructions on the motherboard battery in driver successfully? (For Windows XP only) A: Step 1: First, make sure Service Pack 1 or Service driver from the motherboard driver disk or download the audio driver from GIGABYTE's website to install. For more details, go to the Support & Downloads - Gigabyte GA-B75-D3V | User Manual - Page 76
Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. START Turn off the power. Remove all peripherals, connecting cables, and power cord etc. Make sure the motherboard does not short-circuit with the chassis or - Gigabyte GA-B75-D3V | User Manual - Page 77
enter BIOS Setup. Select "Load Optimized Defaults." Select "Save & Exit Setup" to save changes and exit BIOS Setup. The problem is problem, contact the place of purchase or local dealer for help. Or go to the Support & Downloads\Technical Support page to submit your question. Our customer service - Gigabyte GA-B75-D3V | User Manual - Page 78
GIGABYTE. Our Commitment to Preserving the Environment In addition to high-efficiency performance, all GIGABYTE motherboards , your household waste disposal service or where you purchased the contact us at the Customer Care number listed in your product's user's manual and we will be glad to help - Gigabyte GA-B75-D3V | User Manual - Page 79
.tw •• G.B.T. INC. - U.S.A. TEL: +1-626-854-9338 FAX: +1-626-854-9326 Tech. Support: http://ggts.gigabyte.com.tw Warranty Info: http://rma.gigabyte.us Web address: http://www.gigabyte.us •• G.B.T. INC (USA) - Mexico Tel: +1-626-854-9338 x 215 (Soporte de habla hispano) FAX: +1-626-854-9326 Correo - Gigabyte GA-B75-D3V | User Manual - Page 80
.com.ro •• Serbia WEB address : http://www.gigabyte.co.rs •• Kazakhstan WEB address : http://www.gigabyte.kz You may go to the GIGABYTE website, select your language in the language list on the top right corner of the website. • GIGABYTE Global Service System To submit a technical or non-technical
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
 |
 |
GA-B75-D3V
User's Manual
Rev. 1001
12ME-B75D3V-1001R