Gigabyte GA-B75M-D3H Manual - Page 10

Bundled Software Operating System ŠŠ Norton Internet Security (OEM version) ŠŠ Intel® Rapid Start Technology ŠŠ Intel® Smart Connect Technology ŠŠ Intel® Small Business Advantage ŠŠ Support for Microsoft® Windows 7/XP Form Factor ŠŠ Micro ATX Form Factor; 24.4cm x 22.0cm * G IGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. 1-3 Installing the CPU Read the following guidelines before you begin to install the CPU: •• Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. •• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may locate the notches on both sides of the CPU and alignment keys on the CPU socket.) •• Apply an even and thin layer of thermal grease on the surface of the CPU. •• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage of the CPU may occur. •• Set the CPU host frequency in accordance with the CPU specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the standard requirements for the peripherals. If you wish to set the frequency beyond the standard specifications, please do so according to your hardware specifications including the CPU, graphics card, memory, hard drive, etc. Installing the CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. LGA1155 CPU Socket Alignment Key Alignment Key Pin One Corner of the CPU Socket LGA1155 CPU Notch Notch Triangle Pin One Marking on the CPU - 10 -