Gigabyte GA-H110M-S2H DDR3 User Manual

Gigabyte GA-H110M-S2H DDR3 Manual

Gigabyte GA-H110M-S2H DDR3 manual content summary:

  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 1
    -H110M-S2H GA-H110M-S2H-GSM GA-H110M-S2H DDR3 User's Manual Rev. 1002 GA-H110M-S2H GA-H110M-S2H-GSM GA-H110M-S2H DDR3 For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 2
    Motherboard GA-H110M-S2H GA-H110M-S2H-GSM GA-H110M-S2H DDR3 Motherboard GA-H110M-S2H GA-H110M-S2H-GSM GA-H110M-S2H DDR3 Sept. 11, 2015 Sept. 11, 2015 Copyright © 2016 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are legally registered to their
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 3
    GA-H110M-S2H/GA-H110M-S2H-GSM/GA-H110M-S2H DDR3 Motherboard Layout.....4 Chapter 1 Hardware Installation 5 1-1 Installation Precautions 5 1-2 Product Specifications 6 1-3 Installing the CPU 9 1-4 Installing the Memory 3 Appendix...34 Drivers Installation...34 Regulatory Statements 35 Contact Us...37
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 4
    COMA M_BIOS F_USB2 F_USB1 Intel® H110 CLR_CMOS F_PANEL 3 2 1 0 SATA3 Box Contents 55 GA-H110M-S2H, GA-H110M-S2H-GSM, or GA-H110M-S2H DDR3 motherboard 55 Motherboard driver disk 55 Two SATA cables 55 User's Manual 55 I/O Shield * T he box contents above are for reference only and the
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 5
    installation, carefully read the user's manual and follow these procedures: •• when handling electronic components such as a motherboard, CPU or memory. If you do not have an ESD wrist you are uncertain about any installation steps or have a problem related to the use of the product, please consult
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 6
    GIGABYTE's website for the latest CPU support list.) ŠŠ L3 cache varies with CPU Chipset ŠŠ Intel® H110 Express Chipset Memoryj Memoryk Onboard Graphics Audio ŠŠ 2 x DDR4 DIMM sockets supporting up to 32 GB of system memory for GA-H110M-S2H/GA-H110M-S2H-GSM. NN Only for GA-H110M-S2H DDR3. - 6 -
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 7
    4 x SATA 6Gb/s connectors 1 x CPU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB 3.0/2.0 header 2 x USB 2.0/1.1 headers 1 x Trusted Platform Module (TPM) header 1 x serial port header 1 x Clear CMOS jumper 1 x PS/2 mouse port
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 8
    and product-related information without prior notice. GA-H110M-S2H GA-H110M-S2H-GSM GA-H110M-S2H DDR3 Please visit GIGABYTE's website for support lists of CPU, memory modules, and SSDs. Please visit the Support\Utility List page on GIGABYTE's website to download the latest version of
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 9
    before you begin to install the CPU: •• Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. •• Locate the
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 10
    of 1920x1200@60 Hz (the actual resolutions supported depend on the monitor being used). Connect a monitor that supports DVI-D connection to this port. MM Only for GA-H110M-S2H/GA-H110M-S2H-GSM. NN Only for GA-H110M-S2H DDR3. (Note) The DVI-D port does not support D-Sub connection by adapter. - 10 -
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 11
    devices. USB 3.0/2.0 Port The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification. Use this port and enable the multi-channel audio feature through the audio driver. Please visit GIGABYTE's website for more software information. •• When removing the
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 12
    1-7 Internal Connectors 1 3 2 10 5 4 14 7 6 8 12 13 11 9 1) ATX_12V_2X4 2) ATX 3) CPU_FAN 4) SYS_FAN 5) SATA3 0/1/2/3 6) F_PANEL 7) F_AUDIO 8) SPDIF_O 9) CLR_CMOS 10) F_USB30 11) F_USB1/F_USB2 12) COMA 13) TPM 14) BAT Read the following guidelines before connecting external devices: ••
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 13
    design. Connect the power supply cable to the power connector in the correct orientation. The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the computer will not start. To meet expansion requirements, it is recommended that a power supply
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 14
    ). •• SPEAK (Speaker): Hard Drive Reset Activity LED Switch Power LED Chassis Intrusion Header Connects to the speaker on the chassis front panel. The system reports system startup status by issuing a beep code. One single short beep will be heard if no problem is detected at system startup
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 15
    NC •• The front panel audio header supports HD audio by default. •• Audio signals manual for your expansion card. Pin No. Definition 1 1 SPDIFO 2 GND 9) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 16
    F_USB30 F_ U F_ 10) F_USB30 (USB 3.0/2.0 Header) The header conforms to USB 3.0/2.0 specification and each header can provide two USB ports. For purchasing the optional 3.5" front panel that provides two USB 3.0/2.0 ports, please contact the local dealer. Pin No. Definition Pin No. Definition
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 17
    when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. You may clear the CMOS values by removing the battery: 1. Turn off your computer and unplug the power cord. 2. Gently remove the battery from
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 18
    flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is clear CMOS jumper in Chapter 1 for how to clear the CMOS values.) 2-1 Startup Screen The following startup Logo screen will appear when the computer boots. (Sample BIOS Version: GA-H110M-S2H
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 19
    the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) `` M.I.T. Current Status This screen provides information on CPU/memory frequencies/parameters. `` Advanced Frequency Settings && Graphics Slice Ratio Allows you to set
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 20
    C1. Auto lets the BIOS automatically configure this setting. (Default: Auto) && C6/C7 State Support (Note) Allows you to determine whether to let the CPU enter C6/C7 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 21
    you to determine whether to automatically lower the CPU turbo ratio if the CPU voltage/temperature is too high. (Default: Enabled) && Hardware Prefetcher Allows you to determine whether to enable hardware prefetcher to prefetch data and instructions from the memory into the cache. (Default: Enabled
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 22
    Manual. Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values. `` Advanced Voltage Settings `` Advanced Power Settings && CPU Vcore
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 23
    clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to the CMOS, and then restart your system. && CPU Vcore/CPU VCCSA/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/CPU Allows the fan to run at slow speeds. Manual Allows you to control the fan speed under
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 24
    Information This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time. && System Language Selects the default language used by the BIOS. && System Date Sets the system date. The date format
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 25
    that support GPT format will be prefixed with "UEFI:" string on the boot device list. To boot from an operating system that supports GPT Show Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the GIGABYTE Logo when the system starts up. (Default: Enabled
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 26
    when Fast Boot is set to Ultra Fast. && NetWork Stack Driver Support Disabled Disables booting from the network. (Default) Enabled Enables . (Default: Other OS) && CSM Support Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process. Enabled
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 27
    Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled) && Ipv4 PXE Support Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled. && Ipv6 PXE
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 28
    -off feature for an operating system without XHCI Hand-off support. (Default: Disabled) && USB Mass Storage Driver Support Enables or disables support for USB storage devices. (Default: Enabled) && USB Storage Devices Displays a list of connected USB mass storage devices. This item appears only
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 29
    storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && Aggressive LPM Support SATA Enables or disables support for external SATA devices. (Default: Disabled) `` NVMe Configuration Displays information on your NVME PCIe SSD if installed.
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 30
    (Default: Auto) && DVMT Pre-Allocated Allows you to set the onboard graphics memory size. Options are: 32M~512M. (Default: 64M) && DVMT Total Gfx Enabled) (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 31
    system is turned on upon the return of the AC power. Memory The system returns to its last known awake state upon the return of When prompted for the password, press again without entering the password to clear the password settings. && Power On By Mouse Allows the system to be turned
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 32
    Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is configurable only when Platform Power Management is set && DMI Link ASPM Control Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link. This item is configurable only
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 33
    . The BIOS defaults settings help the system to operate in optimum state. Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values. && Boot Override Allows you to select a device to boot immediately. Press on the device you select and select Yes to confirm
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 34
    "Xpress Install" will automatically scan your system and then list all of the drivers that are recommended to install. You can click the drivers. Or click the arrow icon to individually install the drivers you need. Please visit GIGABYTE's website for more software information. Please visit GIGABYTE
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 35
    product. Restriction of Hazardous Substances (RoHS) Directive Statement GIGABYTE products have not intended to add and safe from , your household waste disposal service or where you purchased the contact us at the Customer Care number listed in your product's user's manual and we will be glad to help
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 36
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Gigabyte GA-H110M-S2H DDR3 | User Manual - Page 37
    -2-8912-4000, FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : http://esupport.gigabyte.com WEB address (English): http://www.gigabyte.com WEB address (Chinese): http://www.gigabyte.tw •• GIGABYTE eSupport To submit a technical or non-technical (Sales/Marketing) question, please
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

To reduce the impacts on global warming, the packaging materials of this product
are recyclable and reusable. GIGABYTE works with you to protect the environment.
For more product details, please visit
GIGABYTE's website.
GA-H110M-S2H DDR3
GA-H110M-S2H-GSM
GA-H110M-S2H
GA-H110M-S2H
GA-H110M-S2H-GSM
GA-H110M-S2H DDR3
User's Manual
Rev. 1002