Gigabyte GA-M750SLI-DS4 Manual - Page 40

Memory Controller Freq. (Note) Allows you to alter the memory controller frequency for the installed CPU. The adjustable range is dependent on the CPU being used. (Default: Auto) DRAM Configuration CMOS Setup Utility-Copyright (C) 1984-2008 Award Software DRAM Configuration SLI-Ready Memory Set Memory Clock x Memory Clock DCTs Mode (Note) DDRII Timing Items x CAS# latency x RAS to CAS R/W Delay x Row Precharge Time x Minimum RAS Active Time x 1T/2T Command Timing x TwTr Command Delay x Trfc0 for DIMM1 x Trfc2 for DIMM2 x Trfc1 for DIMM3 x Trfc3 for DIMM4 x Write Recovery Time x Precharge Time x Row Cycle Time x RAS to RAS Delay [Disabled] Not Detected [Auto] x4.00 800Mhz [Unganged] [Auto] SPD Auto Auto 6T 6T Auto 6T 6T Auto 6T 6T Auto 18T 18T Auto - - - - Auto 3T 3T Auto 105ns 105ns Auto - - - - Auto - - - - Auto - - - - Auto 6T 6T Auto 4T 4T Auto 25T 25T Auto 3T 3T Item Help Menu Level`` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults SLI-Ready Memory Allows you to enable or disable the SLI-Ready (EPP) memory function. (Default: Disabled) Set Memory Clock Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory clock as required. Manual allows the memory clock control item below to be configurable. (Default: Auto) Memory Clock This option is configurable only when Set Memory Clock is set to Manual. When you use an AM2 CPU: DDR 400 DDR 533 Sets Memory Clock to DDR 400. Sets Memory Clock to DDR 533. DDR 667 DDR 800 Sets Memory Clock to DDR 667. Sets Memory Clock to DDR 800. When you use an AM2+ CPU: x2.00 Sets Memory Clock to x2.00. x2.66 x3.33 Sets Memory Clock to x2.66. Sets Memory Clock to x3.33. x4.00 x5.33 Sets Memory Clock to x4.00. Sets Memory Clock to x5.33. (Note) This item appears only if you install a CPU that supports this feature. GA-M750SLI-D4 Motherboard - 40 -