Gigabyte GA-MA74GM-S2 Manual

Gigabyte GA-MA74GM-S2 Manual

Gigabyte GA-MA74GM-S2 manual content summary:

  • Gigabyte GA-MA74GM-S2 | Manual - Page 1
    GA-MA74GM-S2H/ GA-MA74GM-S2 AM2+/AM2 socket motherboard for AMD Phenom™ II processor/ AMD Phenom™ processor/ AMD Athlon™ II processor/ AMD Athlon™ processor/ AMD Sempron™ processor User's Manual Rev. 4001 12ME-MA74G2H-4001R
  • Gigabyte GA-MA74GM-S2 | Manual - Page 2
    Motherboard GA-MA74GM-S2H/GA-MA74GM-S2 Sept. 7, 2009 Motherboard GA-MA74GM-S2H/ GA-MA74GM-S2 Sept. 7, 2009
  • Gigabyte GA-MA74GM-S2 | Manual - Page 3
    :  For detailed product information, carefully read the User's Manual.  For instructions on how to use GIGABYTE's unique features, read or download the information on/from the Support&Downloads\Motherboard\Technology Guide page on our website. For product-related information, check on
  • Gigabyte GA-MA74GM-S2 | Manual - Page 4
    GA-MA74GM-S2H/GA-MA74GM-S2 Motherboard Layout 7 Block Diagram...8 Chapter 1 Hardware Installation 9 1-1 Installation Precautions 9 1-2 Product Specifications 10 1-3 Installing the CPU and CPU Cooler 13 1-3-1 Installing the CPU 13 1-3-2 Installing the CPU Cooler 15 1-4 Installing the Memory
  • Gigabyte GA-MA74GM-S2 | Manual - Page 5
    Drivers 55 3-2 Application Software 56 3-3 Technical Manuals 56 3-4 Contact...57 3-5 System...57 3-6 Download Center 58 Chapter 4 Unique Features 59 4-1 Xpress Recovery2 59 4-2 BIOS Update Utilities 62 4-2-1 Updating the BIOS with the Q-Flash Utility 62 4-2-2 Updating the BIOS with the @BIOS
  • Gigabyte GA-MA74GM-S2 | Manual - Page 6
    Box Contents GA-MA74GM-S2H or GA-MA74GM-S2 motherboard Motherboard driver disk User's Manual One IDE cable Two SATA 3Gb/s cables I/O Shield • The box contents above are for reference only and the actual items shall depend on the product
  • Gigabyte GA-MA74GM-S2 | Manual - Page 7
    GA-MA74GM-S2H/GA-MA74GM-S2 Motherboard Layout DVI VGA KB(Note)_USB ATX_12V CPU_FAN Socket AM2 M_BIOS B_BIOS ATX IT8718 HDMIj R_USB USB IDE FDD LAN AUDIO F_AUDIO PCIEX1 AMD 740G DDR2_1 DDR2_2 PCIEX16 RTL8111D PCI1 GA-MA74GM-S2H/GA-MA74GM-S2 AMD SB710 CD_IN CODEC PCI2 BAT SATA2_0
  • Gigabyte GA-MA74GM-S2 | Manual - Page 8
    PCIe CLK (100 MHz) 1 PCI Express x16 AM3/AM2+/AM2 CPU CPU CLK+/- (200 MHz) DDR2 1066/800/667/533 MHz Dual Channel Memory Hyper Transport Bus PCI Express x16 GFX CLK (100 MHz) PCI Express Bus x1 PCIe CLK (100 MHz) 1 PCI Express x1 RTL8111D RJ45 LAN AMD 740G D-Sub DVI-D or HDMIj (Note) 12
  • Gigabyte GA-MA74GM-S2 | Manual - Page 9
    manual and follow these procedures: • Prior to installation, do not remove or break motherboard S/N wrist strap when handling electronic com- ponents such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, steps or have a problem related to the use of the product, please consult
  • Gigabyte GA-MA74GM-S2 | Manual - Page 10
    Specifications CPU Support for AM3/AM2+/AM2 processors: AMD Phenom™ II processor/ AMD Phenom™ processor/ AMD Athlon™ II processor/ AMD Athlon™ processor/ AMD Sempron™ processor (Go to GIGABYTE's website for the latest CPU support list.) Hyper Transport Bus 2000 MT/s Chipset   Memory
  • Gigabyte GA-MA74GM-S2 | Manual - Page 11
    detection CPU/System temperature detection CPU/System fan speed detection CPU overheating warning CPU/System fan fail warning CPU fan speed control (Note 5) 2 x 8 Mbit flash Use of licensed AWARD BIOS Support for DualBIOS™ PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b j Only for GA-MA74GM-S2H - 11
  • Gigabyte GA-MA74GM-S2 | Manual - Page 12
    HD front panel audio module and enable themulti-channel audio feature through the audio driver. (Note 5) Whether the CPU fan speed control function is supported will depend on the CPU cooler you install. (Note 6) Available functions in EasyTune may differ by motherboard model. Hardware Installation
  • Gigabyte GA-MA74GM-S2 | Manual - Page 13
    before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. • Locate the
  • Gigabyte GA-MA74GM-S2 | Manual - Page 14
    below to correctly install the CPU into the motherboard CPU socket. • Before installing the CPU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the CPU. • Do not force the CPU into the CPU socket. The CPU cannot fit in if oriented incorrectly
  • Gigabyte GA-MA74GM-S2 | Manual - Page 15
    lock into place. (Refer to your CPU cooler installation manual for instructions on installing the cooler.) Step 5: Finally, attach the power connector of the CPU cooler to the CPU fan header (CPU_FAN) on the motherboard. Use extreme care when removing the CPU cooler because the thermal grease/tape
  • Gigabyte GA-MA74GM-S2 | Manual - Page 16
    guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest memory support list.) • Always turn off the computer and unplug
  • Gigabyte GA-MA74GM-S2 | Manual - Page 17
    computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR2 DIMMs are not compatible to DDR DIMMs. Be sure to install DDR2 DIMMs on this motherboard. Notch DDR2 DIMM A DDR2 memory module has a notch, so it can only fit in one direction. Follow the steps
  • Gigabyte GA-MA74GM-S2 | Manual - Page 18
    an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. • Always If necessary, go to BIOS Setup to make any required BIOS changes for your expansion card(s). 7. Install the driver provided with the expansion card
  • Gigabyte GA-MA74GM-S2 | Manual - Page 19
    note the HDMI audio output only supports AC3, DTS and 2-channel-LPCM formats. (AC3 and DTS require the use of an external decoder for decoding.) In Windows Vista, select Start>Control Panel>Sound, select Realtek HDMI Output and then click Set Default. j Only for GA-MA74GM-S2H (Note 1) The DVI
  • Gigabyte GA-MA74GM-S2 | Manual - Page 20
    the HD DVD or Blu-ray discs, refer to the recom mended system requirements (or better) below. • CPU: AMD Phenom™ X3 processor or above • Memory: Two 1 GB DDR2 800 MHz memory modules with dual channel mode enabled • BIOS Setup: At least 256 MB of UMA Frame Buffer Size (refer to Chapter
  • Gigabyte GA-MA74GM-S2 | Manual - Page 21
    devices. • After installing the device and before turning on the computer, make sure the device cable has been securely attached to the connector on the motherboard. - 21 - Hardware Installation
  • Gigabyte GA-MA74GM-S2 | Manual - Page 22
    supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply the correct orientation. The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the computer will
  • Gigabyte GA-MA74GM-S2 | Manual - Page 23
    ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum floppy disk drive. The types of floppy disk drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB. Before connecting a floppy disk drive, be sure
  • Gigabyte GA-MA74GM-S2 | Manual - Page 24
    and are compatible with SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The AMD SB710 controller supports RAID 0, RAID 1, RAID 10, and JBOD. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configur- ing a RAID array. Pin No. Definition 1 GND
  • Gigabyte GA-MA74GM-S2 | Manual - Page 25
    a beep code. One single short beep will be heard if no problem is detected at system startup. If a problem is detected, the BIOS may issue beeps in different patterns to indicate the problem. Refer to Chapter 5, "Troubleshooting," for information about beep codes. • HD (Hard Drive Activity LED
  • Gigabyte GA-MA74GM-S2 | Manual - Page 26
    NC • The front panel audio header supports HD audio by default. If your chassis provides an AC'97 front panel audio module, refer to the instructions on how to activate AC'97 functionality via the audio software in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio." • Audio signals will be present
  • Gigabyte GA-MA74GM-S2 | Manual - Page 27
    an audio system that supports digital audio in. For purchasing the optional S/PDIF In and Out cable, please contact the local dealer. 6 5 2 1 Pin No. 1 2 3 4 5 6 Definition Power No Pin SPDIF SPDIFI GND GND 12) F_USB1/F_USB2 (USB Headers) The headers conform to USB 2.0/1.1 specification. Each
  • Gigabyte GA-MA74GM-S2 | Manual - Page 28
    the jumper. Failure to do so may cause damage to the motherboard. • After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). Hardware Installation - 28 -
  • Gigabyte GA-MA74GM-S2 | Manual - Page 29
    15) BAT The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level,
  • Gigabyte GA-MA74GM-S2 | Manual - Page 30
    Hardware Installation - 30 -
  • Gigabyte GA-MA74GM-S2 | Manual - Page 31
    Windows-based utility that searches and downloads the latest version of BIOS from the Internet and updates the BIOS. For instructions on using the Q-Flash and @BIOS utilities, refer to Chapter 4, "BIOS Update Utilities." • Because BIOS flashing is potentially risky, if you do not encounter problems
  • Gigabyte GA-MA74GM-S2 | Manual - Page 32
    2-1 Startup Screen The following screens may appear when the computer boots. Motherboard Model BIOS Version Award Modular BIOS v6.00PG, An Energy Star Ally Copyright (C) 1984-2009, Award Software, Inc. AMD RS740 BIOS for GA-MA74GM-S2H FAa . . . . : BIOS Setup : XpressRecovery2 :
  • Gigabyte GA-MA74GM-S2 | Manual - Page 33
    screen. Use arrow keys to move among the items and press to accept or enter a sub-menu. (Sample BIOS Version: GA-MA74GM-S2H FAa) CMOS Setup Utility-Copyright (C) 1984-2009 Award Software  MB Setup Change CPU's Clock & Voltage F11: Save CMOS to BIOS F12: Load CMOS from BIOS BIOS Setup
  • Gigabyte GA-MA74GM-S2 | Manual - Page 34
    before, without the hassles of reconfiguring the BIOS settings. First select the profile you wish to load, then press to complete.  MB Intelligent Tweaker(M.I.T.) Use this menu to configure the clock, frequency and voltages of your CPU, memory, etc.  Standard CMOS Features Use this
  • Gigabyte GA-MA74GM-S2 | Manual - Page 35
    -2009 Award Software MB Intelligent Tweaker(M.I.T.) } Advanced Clock Calibration (Note) HT Link Frequency CPU Clock Ratio CPU NorthBridge Freq. (Note) CPU Host Clock Control x CPU Frequency(MHz) PCIE Clock(MHz) VGA Core Clock(MHz) Set Memory Clock x Memory Clock } DRAM
  • Gigabyte GA-MA74GM-S2 | Manual - Page 36
    the CPU specifications. PCIE Clock(MHz) Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 200 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto) (Note) This item appears only if you install a CPU that supports this feature. BIOS
  • Gigabyte GA-MA74GM-S2 | Manual - Page 37
    memory clock. Auto lets BIOS automatically set the memory clock as required. Manual allows the memory clock control item below to be configurable. (Default: Auto) Memory Clock This option is configurable only when Set Memory Clock is set to Manual. When you use an AM3/AM2+ CPU: X2.00 Sets Memory
  • Gigabyte GA-MA74GM-S2 | Manual - Page 38
    ~26T. RAS to RAS Delay Options are: Auto (default), 2T~5T. CKE Power Down Mode Enables or disables the CKE Power Down Mode. (Default: Disabled) BIOS Setup - 38 -
  • Gigabyte GA-MA74GM-S2 | Manual - Page 39
    set the system voltages. Auto lets the BIOS automatically set the system voltages as required. Manual allows all voltage control items below to be configurable. (Default: Manual) DDR2 Voltage Control Allows you to set memory voltage. Normal Supplies the memory voltage as required. (Default) +0.1V
  • Gigabyte GA-MA74GM-S2 | Manual - Page 40
    A Floppy 3 Mode Support [1.44M, 3.5"] [Disabled] Halt On [All, But Keyboard] Base Memory Extended Memory 640K 1918M Move Enter: by using one of the two methods below: • Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default) • None
  • Gigabyte GA-MA74GM-S2 | Manual - Page 41
    specifications. If you wish to enter the parameters manually ", 720K/3.5", 1.44M/3.5", 2.88M/3.5". Floppy 3 Mode Support Allows you to specify whether the installed floppy disk drive Memory These fields are read-only and are determined by the BIOS POST. Base Memory Also called conventional memory
  • Gigabyte GA-MA74GM-S2 | Manual - Page 42
    is only required for entering the BIOS Setup program. (Default) System A password is required for booting the system and for entering the BIOS Setup program. j Only for GA-MA74GM-S2H. (Note) This item appears only if you install a CPU that supports this feature. BIOS Setup - 42 -
  • Gigabyte GA-MA74GM-S2 | Manual - Page 43
    in Windows XP memory size automatically allocated for the onboard graphics controller. If you manuanlly change the Frame Buffer Size, this item will show the memory size you set. j Only for GA-MA74GM-S2H. (Note) This item appears only if you install a CPU that supports this feature. - 43 - BIOS
  • Gigabyte GA-MA74GM-S2 | Manual - Page 44
    to install operating systems that support Native mode. RAID Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial
  • Gigabyte GA-MA74GM-S2 | Manual - Page 45
    LAN Cable Is Attached... If no LAN cable is attached to the motherboard, the Status fields of all four pairs of wires will show Open of 10/100/1000 Mbps in Windows mode or when the LAN Boot ROM is activated. When a Cable Problem Occurs... If a cable problem occurs on a specified pair - BIOS Setup
  • Gigabyte GA-MA74GM-S2 | Manual - Page 46
    function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. OnChip USB Controller Enables or disables the integrated USB controller. (Default: Enabled) Disabled will turn off all of the USB functionalities below
  • Gigabyte GA-MA74GM-S2 | Manual - Page 47
    button USB Wake Up from S3 Modem Ring Resume PME Event Wake Up HPET Support (Note) Power On By Mouse Power On By Keyboard x KB Power ON from a modem that supports wake-up function. (Default: Disabled) (Note) Supported on Windows Vista operating system only. - 47 - BIOS Setup
  • Gigabyte GA-MA74GM-S2 | Manual - Page 48
    turned on upon the return of the AC power. Memory The system returns to its last known awake state upon (of Month) Alarm: Turn on the system at a specific time on each day or on a specific day in a month. Resume Time (hh: mm: ss Supported on Windows Vista operating system only. BIOS Setup - 48 -
  • Gigabyte GA-MA74GM-S2 | Manual - Page 49
    : Exit F1: General Help F7: Optimized Defaults PCI1 IRQ Assignment Auto 3,4,5,7,9,10,11,12,14,15 PCI2 IRQ Assignment Auto 3,4,5,7,9,10,11,12,14,15 BIOS auto-assigns IRQ to the first PCI slot. (Default) Assigns IRQ 3,4,5,7,9,10,11,12,14,15 to the first PCI slot
  • Gigabyte GA-MA74GM-S2 | Manual - Page 50
    attached to the motherboard CI header. CPU fan speed control function. Enabled allows the CPU fan to run at different speed according to the CPU temperature. You can adjust the fan speed with EasyTune based on system requirements. If disabled, the CPU fan runs at full speed. (Default: Enabled) BIOS
  • Gigabyte GA-MA74GM-S2 | Manual - Page 51
    Mode Specifies how to control CPU fan speed. This item is configurable only if CPU Smart FAN Control is set to Enabled. Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU fan control mode. (Default) Voltage Sets Voltage mode for a 3-pin CPU fan. PWM
  • Gigabyte GA-MA74GM-S2 | Manual - Page 52
    try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard. 2-11 Load Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2009 Award Software  MB Intelligent Tweaker(M.I.T.) Load Fail-Safe Defaults  Standard CMOS Features Load Optimized
  • Gigabyte GA-MA74GM-S2 | Manual - Page 53
    2-12 Set Supervisor/User Password CMOS Setup Utility-Copyright (C) 1984-2009 Award Software  MB Intelligent Tweaker(M.I.T.)  Standard CMOS Features  Advanced BIOS Features  Integrated Peripherals  Power Management Setup  PnP/PCI Configurations Enter Password:  PC Health Status Load Fail
  • Gigabyte GA-MA74GM-S2 | Manual - Page 54
    This saves the changes to the CMOS and exits the BIOS Setup program. Press or to return to the BIOS Setup Main Menu. 2-14 Exit Without Saving CMOS Setup Utility-Copyright (C) 1984-2009 Award Software  MB Intelligent Tweaker(M.I.T.) Load Fail-Safe Defaults  Standard CMOS Features
  • Gigabyte GA-MA74GM-S2 | Manual - Page 55
    applications included in the motherboard driver disk. • For USB 2.0 driver support under the Windows XP operating system, please install the Windows XP Service Pack 1 or later. After installing the SP1 (or later), if a question mark still exists in Universal Serial Bus Controller in Device Manager
  • Gigabyte GA-MA74GM-S2 | Manual - Page 56
    applications that GIGABYTE develops and some free software. You can click the Install button on the right of an item to install it. 3-3 Technical Manuals This page provides GIGABYTE's application guides, content descriptions for this driver disk, and the motherboard manuals. Drivers Installation
  • Gigabyte GA-MA74GM-S2 | Manual - Page 57
    3-4 Contact For the detailed contact information of the GIGABYTE Taiwan headquarter or worldwide branch offices, click the URL on this page to link to the GIGABYTE website. 3-5 System This page provides the basic system information. - 57 - Drivers Installation
  • Gigabyte GA-MA74GM-S2 | Manual - Page 58
    3-6 Download Center To update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE website. The latest version of the BIOS, drivers, or applications will be displayed. Drivers Installation - 58 -
  • Gigabyte GA-MA74GM-S2 | Manual - Page 59
    your system data and perform restoration of it. Supporting NTFS, FAT32, and FAT16 file systems, Xpress up your system soon after the operating system and drivers are installed. • The amount of data and hard 512 MB of system memory • VESA compatible graphics card • Windows XP with SP1 or later, Windows
  • Gigabyte GA-MA74GM-S2 | Manual - Page 60
    note that if there is no enough unallocated space, Xpress Recovery2 cannot save the backup file. B. Accessing Xpress Recovery2 1. Boot from the motherboard driver disk to access Xpress Recovery2 for the first time. When you see the following message: Press any key to startup Xpress Recovery2, press
  • Gigabyte GA-MA74GM-S2 | Manual - Page 61
    D. Using the Restore Function in Xpress Recovery2 Select RESTORE to restore the backup to your hard drive in case the system breaks down. The RESTORE option will not be present if no backup is created before. E. Removing the Backup Step 1: If you wish to remove the backup file, select REMOVE. Step
  • Gigabyte GA-MA74GM-S2 | Manual - Page 62
    update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached to an independent IDE/SATA controller, use the key during the POST to access Q-Flash. Award Modular BIOS v6.00PG, An Energy Star Ally Copyright (C) 1984-2009, Award Software, Inc. AMD RS740 BIOS for GA-MA74GM-S2H
  • Gigabyte GA-MA74GM-S2 | Manual - Page 63
    . Make sure the BIOS update file matches your motherboard model. Step 2: The process of the system reading the BIOS file from the floppy disk is displayed on the screen. When the message "Are you sure to update BIOS?" appears, press to begin the BIOS update. The monitor will display
  • Gigabyte GA-MA74GM-S2 | Manual - Page 64
    boots, you should see the new BIOS version is present on the POST screen. Step 5: During the POST, press to enter BIOS Setup. Select Load Optimized Defaults and press to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, so we recommend that you
  • Gigabyte GA-MA74GM-S2 | Manual - Page 65
    . If the BIOS update file for your motherboard is not present on the @BIOS server site, please manually download the BIOS update file from GIGABYTE's website and follow the instructions in "Update the BIOS without Using the Internet Update Function" below. 2. Update the BIOS without Using the
  • Gigabyte GA-MA74GM-S2 | Manual - Page 66
    4-3 EasyTune 6 GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to fine-tune their system settings or do overclock/overvoltage in Windows environment. The user-friendly EasyTune 6 interface also includes tabbed pages for CPU and memory information, letting users read
  • Gigabyte GA-MA74GM-S2 | Manual - Page 67
    for using Q-Share After installing Q-Share from the motherboard driver disk, go to Start>All Programs>GIGABYTE>Q-Share. exe to launch the Q-Share tool. shared data folder Changes the data folder to be shared (Note) Updates Q-Share online Displays the current Q-Share version Exits Q-Share (
  • Gigabyte GA-MA74GM-S2 | Manual - Page 68
    Services technology, Time Repair allows you to quickly back up and restore your system data in the Windows Vista operating system. Time Repair supports system. Preference Screen Button ON have more than 1 GB of capacity and over 300 MB of available space. • Each storage volume can accommodate 64
  • Gigabyte GA-MA74GM-S2 | Manual - Page 69
    do not want to create RAID, you may prepare only one hard drive. • An empty formatted floppy disk. • Windows Vista/XP setup disk. • Motherboard driver disk. 5-1-1 Configuring the Onboard SATA Controller A. Installing SATA hard drive(s) in your computer Attach one end of the SATA signal cable to the
  • Gigabyte GA-MA74GM-S2 | Manual - Page 70
    LAN Onboard Audio Function OnChip USB Controller USB EHCI Controller USB Keyboard Support USB Mouse Support Legacy changes and exit BIOS Setup. The BIOS Setup menus described in this section may differ from the exact settings for your motherboard. The actual BIOS Setup menu options
  • Gigabyte GA-MA74GM-S2 | Manual - Page 71
    BIOS Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed with the installation of Windows operating system for a non-RAID configuration. Step 1: After the POST memory Menu This is the first option screen when you enter the BIOS RAID Setup utility. (Figure 3). To
  • Gigabyte GA-MA74GM-S2 | Manual - Page 72
    the Define LD Menu window (Figure 4). The Define LD selection from the Main Menu allows users to begin the process of manually defining the drive elements ] Total Drv LD 1 RAID 0 0 Stripe Block: 64 KB Gigabyte Boundary: ON [ Drives Assignments ] Channel:ID Drive Model 1:Mas WDC
  • Gigabyte GA-MA74GM-S2 | Manual - Page 73
    + keys to save the information. The window below will appear. Fast Initialization option has been . 8. After the creation is complete, the screen will return to Define LD Menu where you will again if you want to exit the RAID BIOS utility. View Drive Assignments The View Drive Assignments
  • Gigabyte GA-MA74GM-S2 | Manual - Page 74
    assigned to this array. Press + if you are sure to delete the array or other keys to abort. 3. When the array is deleted, the screen will return to Delete LD Menu. Press to return to Main Menu. Option ROM Utility (c) 2008 Advanced Micro Devices, Inc. LD No RAID Mode
  • Gigabyte GA-MA74GM-S2 | Manual - Page 75
    Vista, you also can copy the SATA controller driver from the motherboard driver disk to a USB flash drive. See the instructions below about how to copy the driver in MS-DOS and Windows mode. In MS-DOS mode: Prepare a startup disk that has CD-ROM support and a blank formatted floppy disk. Steps
  • Gigabyte GA-MA74GM-S2 | Manual - Page 76
    for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. AMD AHCI Compatible RAID Controller-x86 platform AMD AHCI Compatible RAID Controller-x64 platform
  • Gigabyte GA-MA74GM-S2 | Manual - Page 77
    your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears (RAID hard drive will not be detected at this stage), select Load Driver (Figure 3). Figure 3 Step 2: Insert the motherboard driver disk (Method A) or the
  • Gigabyte GA-MA74GM-S2 | Manual - Page 78
    Step 3: When a screen as shown in Figure 5 appears, select AMD AHCI Compatible RAID Controller and press Next. Figure 5 Step 4: After the driver is loaded, the RAID drive will appear. Select the RAID drive and then press Next to continue the OS installation (Figure 6). Appendix Figure 6 - 78 -
  • Gigabyte GA-MA74GM-S2 | Manual - Page 79
    a failed drive to rebuild a RAID 1 array. While in the operating system, make sure the chipset drivers and ATi SB700/750 RAID Utility have been installed from the motherboard driver disk. Then launch the AMD RAIDXpert from All Programs in the Start Menu. Step 1: Enter the login ID and password
  • Gigabyte GA-MA74GM-S2 | Manual - Page 80
    over the Internet, and etc. all at the same time. A. Configuring Speakers (The following instructions use Windows Vista as the example operating system.) Step 1: After installing the audio driver, the HD Audio Manager icon will appear in the notification area. Double-click the icon to access the HD
  • Gigabyte GA-MA74GM-S2 | Manual - Page 81
    device to an audio jack. The The current connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK. Side Speaker Out Step 3: On the Speakers screen, click the Speaker Configuration tab. In the Speaker Configuration list, select Stereo
  • Gigabyte GA-MA74GM-S2 | Manual - Page 82
    the Connector Settings dialog box, select the Disable front panel jack detection check box. Click OK to complete. D. Muting the Back Panel Audio (For HD Audio Only) Click Device advanced settings on the top right corner on the Speaker Configuration tab to open the Device advanced settings dialog box
  • Gigabyte GA-MA74GM-S2 | Manual - Page 83
    the connector at the end of the cable to the SPDIF_IO header on your motherboard. Step 2: Secure the metal bracket to the chassis back panel with a input digital audio signals to the computer for audio processing. Step: After connecting the S/PDIF In device, access the Digital Input screen. Click
  • Gigabyte GA-MA74GM-S2 | Manual - Page 84
    the optical/coxial S/PDIF out connector on the motherboard back panel (or on the optional S/PDIF In and Out cable). C-1. Conneting a S/PDIF Out Cable: S/PDIF Coaxial Cable S/PDIF Optical Cable C-2. Configuring S/PDIF Out: Step: On the Digital Output screen, click the Default Format tab and then
  • Gigabyte GA-MA74GM-S2 | Manual - Page 85
    1: After installing the audio driver, the HD Audio Manager icon will appear in the notification area. Double-click the icon to access the HD Audio Manager. Step 2: panel cannot be used at the same time. Step 3: Go to the Microphone screen. Do not mute the recording volume, or you'll not be able to
  • Gigabyte GA-MA74GM-S2 | Manual - Page 86
    , click Start, point to All Programs, point to Accessories, and then click Sound Recorder to begin the sound recording. * Enabling Stereo Mix If the HD Audio Manager does not display the recording device you wish to use, refer to the steps below. The following steps explain how to enable Stereo Mix
  • Gigabyte GA-MA74GM-S2 | Manual - Page 87
    the Start Recording button . 3. To stop recording audio, click the Stop Recording button . Be sure to save the recorded audio file upon completion. B. Playing the Recorded Sound You can play your recording in a digital media player program that supports your audio file format. - 87 - Appendix
  • Gigabyte GA-MA74GM-S2 | Manual - Page 88
    the motherboard driver disk or download the audio driver from GIGABYTE's website to install. For more details, go to the Support&Downloads\Motherboards\FAQ page on our website and search for "onboard HD audio driver." Q: What do the beeps emitted during the POST mean? A: The following Award BIOS
  • Gigabyte GA-MA74GM-S2 | Manual - Page 89
    Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. START Turn off the power. Remove all peripherals, connecting cables, and power cord etc. Make sure the motherboard does not short-circuit with the chassis or
  • Gigabyte GA-MA74GM-S2 | Manual - Page 90
    "Save & Exit Setup" to save changes and exit BIOS Setup. The problem is verified and solved. Turn off the computer and connect problem, contact the place of purchase or local dealer for help. Or go to the Support&Downloads\Technical Service Zone page to submit your question. Our customer service
  • Gigabyte GA-MA74GM-S2 | Manual - Page 91
    GIGABYTE. Our Commitment to Preserving the Environment In addition to high-efficiency performance, all GIGABYTE motherboards office, your household waste disposal service or where you purchased the product Customer Care number listed in your product's user's manual and we will be glad to help you
  • Gigabyte GA-MA74GM-S2 | Manual - Page 92
    Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or
  • Gigabyte GA-MA74GM-S2 | Manual - Page 93
    - 93 - Appendix
  • Gigabyte GA-MA74GM-S2 | Manual - Page 94
    Appendix - 94 -
  • Gigabyte GA-MA74GM-S2 | Manual - Page 95
    231, Taiwan TEL: +886-2-8912-4000 FAX: +886-2-8912-4003 Tech. and Non-Tech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www.gigabyte.com.tw WEB address (Chinese): http://www.gigabyte.tw • G.B.T. INC. - U.S.A. TEL: +1-626-854-9338 FAX: +1-626-854-9339 Tech
  • Gigabyte GA-MA74GM-S2 | Manual - Page 96
    .com.ro • Serbia WEB address : http://www.gigabyte.co.rs • Kazakhstan WEB address : http://www.gigabyte.kz You may go to the GIGABYTE website, select your language in the language list on the top right corner of the website. • GIGABYTE Global Service System To submit a technical or non-technical
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

GA-MA74GM-S2H/
GA-MA74GM-S2
AM2+/AM2 socket motherboard for
AMD Phenom
II processor/ AMD Phenom
processor/
AMD Athlon
II processor/ AMD Athlon
processor/
AMD Sempron
processor
User's Manual
Rev. 4001
12ME-MA74G2H-4001R