Gigabyte GA-Z77-D3H User Manual - Page 25
mSATA Solid-State Drive Connector, Controlled by the Intel Z77/H77 Chipset, CLR_CMOS Clear CMOS Jumper - sata connections
View all Gigabyte GA-Z77-D3H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
F_AUDIO(H) F_PANEL(NH) F_PANEL (H61M-D2) DB_PORT 8) mSATA (Solid-State Drive Connector, Controlled by the Intel Z77/H77 Chipset) The mSATA connector conforms to SATA 3Gb/s standard and can connect to a single solid-state drive. When the mSATA connector is installed with a solid-state drive, the SATA2 5 connector will become unavailable. BIOS Switcher (X58A-OC) 1 mSATA M_SATA DIP 1 23 1 DIP 1 23 1 DIP 1 23 1 Voltage measurement module(X58A-OC) PWM Switch (X58A-OC) DIP 1 23 PCIe power connector (SATA)(X58A-OC) 9) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. Open: Normal Short: Clear CMOS Values • Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. • After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). - 25 - Hardware Installation