Gigabyte GS-R22PE1 Manual
Gigabyte GS-R22PE1 Manual
 |
View all Gigabyte GS-R22PE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte GS-R22PE1 manual content summary:
- Gigabyte GS-R22PE1 | Manual - Page 1
GS-R22PE GS-R22PE1 Dual LGA2011 socket motherboard for Intel® Xeon® series processors Service Guide Rev. 1.0 - Gigabyte GS-R22PE1 | Manual - Page 2
respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted - Gigabyte GS-R22PE1 | Manual - Page 3
Before using this information and the product it supports, please read the following general information. 1. This Service Guide provides you with all technical information relating to the BASIC CON- FIGURATION decided for GIGABYTE's "global" product offering. To better fit local marketrequirements - Gigabyte GS-R22PE1 | Manual - Page 4
Table of Contents Box Contents...6 Safety, Care and Regulatory Information 7 Chapter 1 Hardware Installation 10 1-1 Installation Precautions 10 1-2 Product Specifications 11 Chapter 2 System Hardware Installation 13 2-1 Removing System Cover 14 2-2 Installing the CPU 15 2-3 Installing the - Gigabyte GS-R22PE1 | Manual - Page 5
5-6 Boot Option Menu 77 5-7 Boot Manager 78 5-8 Exit Menu...79 5-9 BIOS Beep Codes 80 5-9-1 PEI Beep Codes...80 5-9-2 DXE Beep Codes...80 5-10 BIOS Recovery Instruction 81 - 5 - - Gigabyte GS-R22PE1 | Manual - Page 6
Box Contents GS-R22PE/GS-R22PE1 Driver CD • The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. • The motherboard image is for reference only. - 6 - - Gigabyte GS-R22PE1 | Manual - Page 7
safely when it is used in accordance with its marked electricalratings and product usage instructions • Do not use this product near water or a heat source.* Set specified in the product's documentation. • Only authorized service technicians should repair laser devices. Precaution for Product with - Gigabyte GS-R22PE1 | Manual - Page 8
environment. This equipmentgenerates, uses, and can radiate radio frequency energy and, if not installed and used in accordance withthe instruction manual, may cause harmful interference to radio communications. Operation of thisequipment in a residential area is likely to cause harmful interference - Gigabyte GS-R22PE1 | Manual - Page 9
please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Battery Warning: - Gigabyte GS-R22PE1 | Manual - Page 10
of electrostatic discharge (ESD). Prior to installation, carefully read the service guide and follow these procedures: • Prior to installation, do not remove are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician. - Gigabyte GS-R22PE1 | Manual - Page 11
Motherboard ŠŠ GS-R22PE: GA-7PPSH2 ŠŠ GS-R22PE1: GA-7PPSH CPU ŠŠ Support for Intel® Xeon® E5-2600 series processors in the LGA2011 package ŠŠ L3 cache varies with CPU ŠŠ Supports QuickPath Interconnect up to 8GT/s ŠŠ Enhanced Intel SpeedStep Technology (EIST) ŠŠ Support Intel Virtualization - Gigabyte GS-R22PE1 | Manual - Page 12
2 x USB 2.0/1.1 ports ŠŠ 4 x RJ-45 ports (GS-R22PE1/GA-7PPSH) ŠŠ 2 x RJ-45 ports (GS-R22PE/GA-7PPSH2) ŠŠ 1 x Server Management LAN port ŠŠ CPU/system fan speed control function is supported will depend on the CPU/system cooler at 80 plus gold (Liteon) * GIGABYTE reserves the right to make any - Gigabyte GS-R22PE1 | Manual - Page 13
Chapter 2 System Hardware Installation Pre-installation Instructions Perform the steps below before you open the server or before you remove or replaceany component. • Back up all important system and data files before - Gigabyte GS-R22PE1 | Manual - Page 14
Cover Before you remove or install the system cover • Make sure the system is not turned on or connected to AC power. Follow these instructions to remove the system cover: 1. Loosen and remove the screws securing the middle cover. 2. Remove the middle top cover from the system. 2 3 1 3 3. Loosen - Gigabyte GS-R22PE1 | Manual - Page 15
you begin to install the CPU: • Make sure that the motherboard supports the CPU. • Always turn off the computer and unplug the power cord described in the following sections unless you are a qualified service technician. Follow these instructions to install the CPU: 1. Raise the metal locking lever - Gigabyte GS-R22PE1 | Manual - Page 16
2-3 Installing the Heat Sink Follow these instructions to install the heat sinks: 1. Apply thermal compound evenly on the top of the CPU. Remove the protective cover from the underside of the heat - Gigabyte GS-R22PE1 | Manual - Page 17
you are unable to insert the memory, switch the direction. 2-4-1 Four Channel Memory Configuration This motherboard provides eight DDR3 memory sockets and supports Four Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory - Gigabyte GS-R22PE1 | Manual - Page 18
the power cord from the power outlet to prevent damage to the memory module. Be sure to install DDR3 DIMMs on this motherboard. Follow these instructions to install the Memory: 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down. 2. Close the plastic clip at both edges - Gigabyte GS-R22PE1 | Manual - Page 19
2-4-3 Memory Suggest Population Table 3 Slots Per Channel (UDIMM) 1DPC 2DPC 1.35V 1.5V 1.35V 1.5V n/a 1066, 1333 n/a 1066, 1333 n/a 1066, 1333 n/a 1066, 1333 n/a 1066, 1333 n/a 1066, 1333 1066 1066, 1333 1066 1066, 1333 1066 1066, 1333 1066 1066, 1333 3 Slots Per Channel - Gigabyte GS-R22PE1 | Manual - Page 20
Hardware Installation Number DIMM Memory Mode of DIMMs A0 A1 A2 B0 B1 B2 C0 C1 D0 D1 D2 E0 E1 E2 F0 F1 F2 G0 G1 G2 H0 H1 H2 Independant Lockstep/ Mirroring Sparing 1 P OK N/S N/S (Quad-Rank OK) 2 P P OK N/S N/S (Quad-Rank OK) 4 P P P P OK N/S N/S ( - Gigabyte GS-R22PE1 | Manual - Page 21
To install a PCI card, a riser card must be installed. Follow these instructions to PCI Expansion card: 1. Loosen the riser bracket screwsand lift the riser out from the server chassis. 2. Orient the PCI card with the riser guide slot and push in the direction of the arrow until the PCI card sits - Gigabyte GS-R22PE1 | Manual - Page 22
not fit back into the bay if inserted incorrectly. • Make sure that the HDD is connected to the HDD connector on the backplane. Follow these instructions to install the 3.5" Hard disk drive: 1. Press the release button. 2. Pull the locking lever to remove the HDD tray. 3. Slide hard disk into blank - Gigabyte GS-R22PE1 | Manual - Page 23
Follow these instructions to install the 2.5" Hard disk drive: 1. Loosen and remove the screws securing the HDD cage bracket. 2. Remove the HDD cage bracket from the system. 3 2 1 2 1 3. Loosen and remove the screws securing the HDD cage. 4 - 23 - Hardware Installation - Gigabyte GS-R22PE1 | Manual - Page 24
4. Insert the rubber in the larger part of the hole, and secure it by clipping into the smaller part of the hole. 5 5. Slide hard disk into HDD cage. 6 6. Secure the hard drive to the cage with four (4) screws as shown. Do not over tighten thescrews. 7 7 Hardware Installation - 24 - - Gigabyte GS-R22PE1 | Manual - Page 25
7. Engage the HDD Slide the blank into the bay until it locks into place. 8 8. Engage the HDD Security Lock. For detail instruction, please see the following section. - 25 - Hardware Installation - Gigabyte GS-R22PE1 | Manual - Page 26
2-6-1 Hard Disk Drive Security Lock The HDD bays incorporate a security screw to prevent accidental HDD release.To engage the lock, turn the security screw clock-wise toward the Lock symbol. To disengage the lock,turn the security screw counter clock-wise toward the Unlock symbol as shown. Hardware - Gigabyte GS-R22PE1 | Manual - Page 27
2-6-2 Hard Disk Drive Installation Sequence GS-R22PE1 1 4 7 10 2 5 8 11 3 6 9 12 Bay 1/2/3/4 Bay 5/6/7/8 Bay 9/10/11/12 Intel onboard AHCI port LSI SAS 2008 port LSI SAS 2008 port GS-R22PE 1 4 7 10 2 5 8 11 3 6 9 12 Bay 1/2/3/4 Bay 5/6/7/8 Bay 9/10/11/12 SKU Key Location - Gigabyte GS-R22PE1 | Manual - Page 28
Intel C600 SeriesUpgrade ROM SKUs: Upgrade ROM SKU# Patsburg-A; no upgrade ROM 1 2 5 6 9 SCU Ports 4 ports 4 ports 4 ports 8 ports 8 ports 8 ports Protocol Enabled SATA Only SATA/SAS SATA/SAS SATA/SAS SATA/SAS SATA Only Intel RSTe SAS RAID 5 SATA RAID 5 No Yes No Yes SATA RAID 5 Hardware - Gigabyte GS-R22PE1 | Manual - Page 29
2-7 Replacing the Back Plane Board Follow these instructions to replace the back plane board: 1. Remove the chassis cover. See Removing the System Cover on page 14. 2. Loosen and remove the screws securing the - Gigabyte GS-R22PE1 | Manual - Page 30
2-8 Replacing the Power Supply Follow these instructions to replace the power supply: Liteon Power Supply 1. Disconnect the power cables. 2. Pull up the power supply handle and press the retaining clip on the - Gigabyte GS-R22PE1 | Manual - Page 31
2-9 Replacing the FAN Assemblly Follow these instructions to replace the fan assembly: 1. Lift up the fan assembly from the chassis. 2. Reverse the previous steps to install the replacement fan assembly. - 31 - Hardware Installation - Gigabyte GS-R22PE1 | Manual - Page 32
2-10 Replaceing the Front IO Board Follow these instructions to replace the Front IO board: 1. Remove the screws securing the Front I/O panel cover. 2. Remove the screws securing the Front I/O panel. 3. Reverse the steps above to install a new Front I/O Panel. 2 1 Hardware Installation - 32 - - Gigabyte GS-R22PE1 | Manual - Page 33
Chapter 3 System Appearance 3-1 Front View 2 1 No. Decription 1 Front Panel LEDs and buttons 2. HDD bays - 33 - Hardware Installation - Gigabyte GS-R22PE1 | Manual - Page 34
3-2 Rear View GS-R22PE1 3 57 1 2 46 8 No. Decription 1 Power modules 2. VGA port 3. Serial port 4. RJ-45 LAN ports 5. Management LAN port 6. USB ports 7. 10G LAN ports 8. PCI Express card bays GS-R22PE 35 7 1 2 46 No. Decription 1 Power modules 2. VGA port 3. Serial port 4. RJ-45 LAN - Gigabyte GS-R22PE1 | Manual - Page 35
3-3 Front Panel LED and Buttons 3 4 1 5 2 6 7 No. Name Power button 1. and LED Color Green Green N/A 2. ID button and LED 3. LAN1 LED 4. LAN 2 LED 5. HDD Status LED System 6. Status LED 7. Reset button Blue N/A Green Green N/A Green Green N/A Green N/A Green Amber N/A Status On - Gigabyte GS-R22PE1 | Manual - Page 36
3-4 Rear System LAN LEDs GS-R22PE1 1 24 3 5 65 6 GS-R22PE 1 24 3 12 No. Name 1 Connection/ Speed LED Color Yellow Green N/A 2. Activity LED Green 3. Activity LED Green 4. Connection/ Speed LED Green N/A 5. Connection/ Speed LED Yellow - Gigabyte GS-R22PE1 | Manual - Page 37
3-5 Power Supply LEDs Etasis Power Supply Power Supply LED Power Supply Status Power Switch On Normal State Power Switch Off Standby (AC In, Only +5VSB output) Power Fail Fan Fail Color Blinking Green g Red gGreen Green Green gRed Blinking gGreen Blinking Green Red Blinking Red - 37 - Hardware - Gigabyte GS-R22PE1 | Manual - Page 38
Liteon Power Supply Power Supply LED Condition Standby Mode/ Single Unit (Single mode) Condition Standby Mode/ Two Units (One Unit NO AC) Condition Standby Mode/ Two Units (Redundant mode) Condition Normal Mode/ Single Unit (Single mode) Hardware Installation Status Normal Fan Lock (15 sec) - Gigabyte GS-R22PE1 | Manual - Page 39
Etasis Power Supply (continued) Condition Normal Mode/ Two Units (Redundant mode) Status Normal Fan Lock (15 sec) OTP OCP OVP UVP Color Green Yellow Yellow Yellow Yellow Yellow - 39 - Hardware Installation - Gigabyte GS-R22PE1 | Manual - Page 40
3-6 Hard Disk Drive LEDs LED1 LED2 Mode Non-RAID LSI RAID (3rd RAID Controler) SCU RAID AHCI RAID Description Hard disk drive is not present Hard disk drive is present but not active Hard disk drive is present and active Hard disk drive is not present Hard disk drive is present but not active - Gigabyte GS-R22PE1 | Manual - Page 41
Chapter 4 Motherboard Components 4-1 GA-7PPSH/GA-7PPSH2 Motherboard Components 49 50 12 3 4 5 6 48 7 47 46 45 51 52 44 53 54 43 55 56 89 10 11 12 13 42 41 14 40 39 38 37 30 29 28 27 36 26 25 35 16 17 18 19 15 20 21 34 33 32 31 22 23 24 - 41 - Hardware Installation - Gigabyte GS-R22PE1 | Manual - Page 42
MINISAS4 37 MINISAS3 38 SATA0/1 39 MINISAS2 40 MINISAS1 Hardware Installation ID switch Description LAN2 port (10G LAN port/GS-R22PE1/GA-7PPSH) LAN1 port (10G LAN port/GS-R22PE1/GA-7PPSH) BMC Management LAN port (top) / USB ports (bottom) LAN1/2 port (1 GbE LAN port) Serial port (top)/ VGA - Gigabyte GS-R22PE1 | Manual - Page 43
41 USB2 42 IPMB1 43 USB1 44 TPM_1 45 SKU_KEY1 46 RAID_KEY1 47 COM2 48 PCI-E_2 49 BAT1 50 PCI-E_1 51 DDR3_P1_E0 52 DDR3_P1_E1 53 DDR3_P1_E2 54 DDR3_P1_F0 55 DDR3_P1_F1 56 DDR3_P1_F2 Front USB connector IPMB connector Front USB connector TPM connector PBG A SKU Select connector RAID Select connector - Gigabyte GS-R22PE1 | Manual - Page 44
4-2 Jumper Setting 7 1 2 3 4 5 6 No. Jumper Code BIOS WP1 1. (BIOS Write Protect Jumper) FLASH_DP1 2. (Flash Descriptor Security Jumper) SSB_ME1 3. (ME enable/ disable Jumper) Hardware Installation Jumper Setting 1-2 Close: Normal operation. (Default setting) 2-3 Close: Enable BIOS - Gigabyte GS-R22PE1 | Manual - Page 45
4. CLR_CMOS1 1-2 Close: Normal operation (Default setting) (Clearing CMOS Jumper) 2-3 Close: Clear CMOS data 5. BIOS_RVCR1 1-2 Close: Normal operation (Default setting) (BIOS Recovery Jumper) 2-3 Close: BIOS recovery mode. PASSWORD1 1-2 Close: Normal operation (Default setting) 6. (Skip - Gigabyte GS-R22PE1 | Manual - Page 46
Setup program, press the key during the POST when the power is turned on. • BIOS flashing is potentially risky, if you do not encounter problems of using the current BIOS version, it is recommended that you don't flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS - Gigabyte GS-R22PE1 | Manual - Page 47
Main This setup page includes all the items in standard compatible BIOS. Advanced This setup page includes all the items of AMI BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.) Chipset This setup page includes all the - Gigabyte GS-R22PE1 | Manual - Page 48
5-1 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom - Gigabyte GS-R22PE1 | Manual - Page 49
BIOS Information BIOS Version Display version number of the BIOS. Memory Information Total Memory Determines how much total memory is present during the POST. System Date Set the date following the weekday-month-day- year format. System Time Set the system time following the hour-minute- second - Gigabyte GS-R22PE1 | Manual - Page 50
5-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. BIOS Setup - 50 - - Gigabyte GS-R22PE1 | Manual - Page 51
5-2-1 PCI Configuration LSI 2008 Raid ROM (Optional)(Note) When enabled, This setting will initialize the device expansion ROM for the LSI 2008 RAID. Options available: Enabled/Disabled. Default setting is Enabled. Onboard LAN1/2 Controller Enable/Disable Onboard LAN controller . Options available: - Gigabyte GS-R22PE1 | Manual - Page 52
PERR Generation When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI. Options available: Enabled/Disabled. Default setting is Enabled. SERR Generation When this item is set to enabled, PCI bus system error (SERR) is generated and is routed to NMI. Options - Gigabyte GS-R22PE1 | Manual - Page 53
5-2-2 Trusted Computing TPM Support Select Enabled to activate TPM support feature. Options available: Enabled/Disabled. Default setting is Enabled. TPM State (Note) Select Enabled to activate TPM State function. Options available: Enabled/Disabled. Default setting - Gigabyte GS-R22PE1 | Manual - Page 54
5-2-3 CPU Configuration BIOS Setup - 54 - - Gigabyte GS-R22PE1 | Manual - Page 55
- 55 - BIOS Setup - Gigabyte GS-R22PE1 | Manual - Page 56
. L3 Cache Display the information of L3 Cache per Core. CPU Speed Display the current installed CPU speed. 64-bit Display the supported infprmation of installed CPU. Hyper-threading The Intel Hyper Threading Technology allows a single processor to execute two or more separate threads concurrently - Gigabyte GS-R22PE1 | Manual - Page 57
, CPU will save more power but lose more performance. Note: This register will be changed by OS too if OS support it like Windows 2008 or newer Linux. Options available: Performance : Write value 0 into MSR_ENERGY_PERFORMANCE_BIAS Balanced Performance: Write value 7 into MSR_ENERGY_PERFORMANCE_BIAS - Gigabyte GS-R22PE1 | Manual - Page 58
5-2-4 Runtime Error Logging Runtime Error Logging Support Enable/Disable Runtime error logging support. Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup - 58 - - Gigabyte GS-R22PE1 | Manual - Page 59
5-2-5 SATA Configuration SATA Mode(Note) Select the on chip SATA type. IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the IDE emulation mode. This is not allowed to access RAID setup utility. RAID Mode: When set to RAID, the SATA controllerenables - Gigabyte GS-R22PE1 | Manual - Page 60
5-2-6 SAS Configuration SCU devices Enable/Disable Patsburg SCU devices. Options available: Enabled/Disabled. Default setting is Enabled. Onboard SAS oprom Enable/Disable onboard SAS option ROM. Options available: Enabled/Disabled. Default setting is Enabled. SAS Configuration (Note) Device - Gigabyte GS-R22PE1 | Manual - Page 61
5-2-6 Serial Port Console Redirection - 61 - BIOS Setup - Gigabyte GS-R22PE1 | Manual - Page 62
to send start/stop signals. Options available: None/Hardware RTS/CTS. Default setting is None. VT-UTF8 Combo Key Support Enable/Disable VT-UTF8 Combo Key Support. Options available: Enabled/Disabled. Default setting is Enabled. (Note) Advanced items prompt when this item is defined. BIOS Setup - Gigabyte GS-R22PE1 | Manual - Page 63
5-3 Chipset Menu The Chipset menu display submenu options for configuring the function of North Bridge and South Bridge. Select a submenu item, then press Enter to access the related submenu screen. - 63 - BIOS Setup - Gigabyte GS-R22PE1 | Manual - Page 64
5-3-1 North Bridge Configuration BIOS Setup - 64 - - Gigabyte GS-R22PE1 | Manual - Page 65
5-3-1-1 IOH Configuration - 65 - BIOS Setup - Gigabyte GS-R22PE1 | Manual - Page 66
Enable/Disable Intel OAT Technology function. Options available: Enabled/Disabled. Default setting is Enabled. ATS Support Enable/Disable VT-d Engine Address Translation Service (ATS) support.. Options available: Enabled/Disabled. Default setting is Disabled. VGA Priority Define the display device - Gigabyte GS-R22PE1 | Manual - Page 67
Current Memory Mode Displays the cuurent memory mode. Memory mode can be determined in Memory Mode item. Current Memory Speed Displays the cuurent memory speed. Memory Mode Determine the memory mode. When set to Indendent mode, all DIMMs are available to the operation system. When set to Mirroring - Gigabyte GS-R22PE1 | Manual - Page 68
5-3-1-2 DIMM Information BIOS Setup - 68 - - Gigabyte GS-R22PE1 | Manual - Page 69
DIMM Information: DIMM Group: CPU Socket 0/1 DIMM Information CPU Socket 0: DDR3_P0_A0/DDR3_P0_A1/DDR3_P0_A2/ DDR3_P0_B0/DDR3_P0_B1/DDR3_P0_B2 DDR3_P0_C0/DDR3_P0_C1/DDR3_P0_C2 DDR3_P0_D0/DDR3_P0_D1/DDR3_P0_D2 Status CPU Socket 1: DDR3_P1_E0/DDR3_P1_E1/DDR3_P1_E2/ DDR3_P1_F0/ - Gigabyte GS-R22PE1 | Manual - Page 70
5-3-2 South Bridge Configuration PCH Information: Name/Stepping Information Displays the name and stepping information of the south bridge. SB Chipset Configuration: PCH Compatibility RID Enable/Disable Compatibility RID function. Options available: Enabled/Disabled. Default setting is Disabled. - Gigabyte GS-R22PE1 | Manual - Page 71
5-3-3 ME Subsystem ME Subsystem Configuration Enable/Disable ME subsystem configuration. Options available: Enabled/Disabled. Default setting is Enabled. - 71 - BIOS Setup - Gigabyte GS-R22PE1 | Manual - Page 72
5-4 Security Menu The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that you can set: • Administrator Password Entering this password will allow the user to access and change all settings in the - Gigabyte GS-R22PE1 | Manual - Page 73
5-5 Server Management Menu System Information Displays the BMC information of firmware version,SOR version, and FRU version. BMC LAN Configuration BMC LAN Configuration. Press Enter to access the related submenu. System Event Log System Event Log Configuration. Press Enter to access the related - Gigabyte GS-R22PE1 | Manual - Page 74
5-5-1 System Information The System Management submenu is a simple display page for BMC information of firmware version,SOR version, and FRU version. Items on this window are non-configurable. BIOS Setup - 74 - - Gigabyte GS-R22PE1 | Manual - Page 75
5-5-2 BMC LAN Configuration LAN Channel 1 Configuration Source Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option willnot modify any BMC network parameters during BIOS phase. Options available: Static/Dynamic/Do Nothing. Default setting is Do Nothing. IP - Gigabyte GS-R22PE1 | Manual - Page 76
5-5-3 System Event Log Erasing Settings Erase SEL Choose options fro erasing SEL. Options available: No/Yes,On next reset/Yes, On every reset. Default setting is No. BIOS Setup - 76 - - Gigabyte GS-R22PE1 | Manual - Page 77
5-6 Boot Option Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Priority Order Boot Option Press Enter to configure the boot priority. By default, the server searches for - Gigabyte GS-R22PE1 | Manual - Page 78
5-7 Boot Manager The Boot manager menu allows you to specify the boot-up drive. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Override UEFI: Built-in EFI Shell Press Enter to configure the device as the boot-up drive. BIOS Setup - 78 - - Gigabyte GS-R22PE1 | Manual - Page 79
5-8 Exit Menu The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press Enter. Save Changes and Exit Saves changes made and close the BIOS setup. Options available: Yes/No. Discard Changes and Exit Discards changes made and close the BIOS - Gigabyte GS-R22PE1 | Manual - Page 80
5-9 BIOS Beep Codes 5-9-1 PEI Beep Codes # of Beeps 1 1 2 3 3 4 4 7 Description Memory not Installed. Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed S3 Resume failed Reset - Gigabyte GS-R22PE1 | Manual - Page 81
becomes corrupt the boot block can be used to restore the BIOS to a working state. To restore your BIOS, please follow the instructions listed below: Recovery Instruction: 1. Change xxx.ROM to flashabl.rom. 2. Copy flashabl.rom and AFUDOS.exe to USB diskette. 3. Setting BIOS Recovery jump to enabled - Gigabyte GS-R22PE1 | Manual - Page 82
4. Boot into BIOS recovery. 5. Run Proceed with flash update. 6. BIOS updated. BIOS Setup - 82 -
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
 |
 |
GS-R22PE
GS-R22PE1
Dual LGA2011 socket motherboard for Intel
®
Xeon
®
series processors
Service Guide
Rev. 1.0