Gigabyte GSmart MW702 ROM Upgrade SOP-GSmart MW702/ GSmart MS802 (English WM6)
Gigabyte GSmart MW702 Manual
 |
View all Gigabyte GSmart MW702 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte GSmart MW702 manual content summary:
- Gigabyte GSmart MW702 | ROM Upgrade SOP-GSmart MW702/ GSmart MS802 (English WM6) - Page 1
upgrade. **Please make sure the battery is over 60% full before upgrade. ROM Upgrade Procedure : 1. When you finish downloading the image file, unzip the SD card. The Mini/Micro SD card must have at least 256MB of memory available. 2. Please make sure the battery is over 60% full before upgrading - Gigabyte GSmart MW702 | ROM Upgrade SOP-GSmart MW702/ GSmart MS802 (English WM6) - Page 2
4. The upgrade takes about 20 minutes. Upon completion, please follow the instruction - "Please Remove Battery" to remove the battery for 1~2 seconds, then put the battery back and reboot the phone. When the screen displays the power on - Gigabyte GSmart MW702 | ROM Upgrade SOP-GSmart MW702/ GSmart MS802 (English WM6) - Page 3
5. On calibration screen, use the stylus and follow the directions. 6. You will see an introduction screen on how to use stylus, tap "Next". - Gigabyte GSmart MW702 | ROM Upgrade SOP-GSmart MW702/ GSmart MS802 (English WM6) - Page 4
7. On "Pop-up menus" screen, tap and hold an item for about 2 seconds to activate the popup menu. Select "Cut". 8. Follow the prompt on screen and tap and hold on the item for about 2 seconds to activate the popup menu again. Select "Paste". - Gigabyte GSmart MW702 | ROM Upgrade SOP-GSmart MW702/ GSmart MS802 (English WM6) - Page 5
9. Tap "Next". 10. Enter the Date and Time Zone, and then tap "Next". - Gigabyte GSmart MW702 | ROM Upgrade SOP-GSmart MW702/ GSmart MS802 (English WM6) - Page 6
11. Tap "Skip" to skip setting up password. 12. Calibration procedure is complete. Please tap the screen to go to the next step. - Gigabyte GSmart MW702 | ROM Upgrade SOP-GSmart MW702/ GSmart MS802 (English WM6) - Page 7
13. The system will start initializing for the first time and install applications. When the initialization completes, the system will automatically restart. The upgrade is then complete.
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
Notice Before ROM Upgrade :
**Please backup all personal files and applications installed by user to PC before upgrade.
**Please make sure the battery is over 60% full before upgrade.
ROM Upgrade Procedure :
1. When you finish downloading the image file, unzip the file first. Please copy ALL of the
unzipped files to a Mini/Micro SD card. The Mini/Micro SD card must have at least 256MB of
memory available.
2. Please make sure the battery is
over 60% full
before upgrading. Place the Mini/Micro SD
card into the phone and turn off the phone. Then
scroll down the Volume Key and press the
Power Button at the same time
,
until the “IMAGE UTILITY” show up, release all buttons
and
it
will start installing
.
(1) Blue Light: Reading, from Mini/Micro SD card to SDRAM.
(2) Orange Light: Writing, from SDRAM to Flash.
3. After entering Download mode,
plug in the charger NOW
to ensure upgrade stability.