Graco 3001636-043 Assembly Instructions

Graco 3001636-043 - Sarah Classic Convertible Crib Manual

Graco 3001636-043 manual content summary:

  • Graco 3001636-043 | Assembly Instructions - Page 1
    ASSEMBLY INSTRUCTIONS Convertible Crib Adult assembly required. Small parts may present prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your product. Before you begin we recommend that you follow the steps below: 1. Please read the instructions
  • Graco 3001636-043 | Assembly Instructions - Page 2
    Furniture Care Instructions Room Climate Control Wood, when first cut contains more than 50 any fine wood product. The Ideal Environment for Fine Furniture Fine wood furniture will have fewer problems when its environment is controlled at a temperature between 65 and 75 degrees and a relative
  • Graco 3001636-043 | Assembly Instructions - Page 3
    STOP IF YOU EXPERIENCE ANY ISSUES WITH THIS PRODUCT BEFORE YOU RETURN THIS TO THE RETAILER PLEASE FOLLOW PROCEDURES ON THE REVERSE SIDE OF THIS FORM. BULLETIN NO. PAP00-00 3
  • Graco 3001636-043 | Assembly Instructions - Page 4
    to follow should you have any questions: For best and most timely service please contact us by e-mail at [email protected] Please provide the following on the back of the case or on the foot/headboard of the crib. Please include all numbers found on that label including the PO# and production
  • Graco 3001636-043 | Assembly Instructions - Page 5
    T I O N S (continued) ! WARNING! • FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR FUTURE USE. • UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND FASTENING DEVICES HAVE
  • Graco 3001636-043 | Assembly Instructions - Page 6
    A S S E M B L Y I N S T R U C T I O N S (continued) Crib Assembly Step 1 Attach the back rail legs(H) to the Back Rail Bottom (G) using wood dowels(R) & 3 1/4" Bolts(L) & Barrel Nuts(P). See Figure 1. R R L P H Q L L P H P G L P Model shown is example only.
  • Graco 3001636-043 | Assembly Instructions - Page 7
    A S S E M B L Y I N S T R U C T I O N S (continued) Step 3 Attach the Back Rail Top(E) to the back rail using wood dowels (R),see Figure 3. E R F Model shown is example only. Styles may vary. E I I F G Figure 3 Step 4 Use the wooden connecting blocks(I) and wood screws(U) to tightly affix
  • Graco 3001636-043 | Assembly Instructions - Page 8
    is example only. Styles may vary. A R N Q B Figure 5 L Q C R P L Step 6 Attach the Crib End Top(A) to the Crib end using wood dowels (R), then insert bolts(N), through the top rail of crib ends bottom into the threaded insets onto the crib end top as shown in Figure 6.Repeat on the other end
  • Graco 3001636-043 | Assembly Instructions - Page 9
    to the Back Rail using wood dowels(R) & bolts(L) & barrel nuts(P). See Figure 7. Then attach the L bottom stretcher(J) to the crib ends using wood dowels (R) & bolts (N) & barrel nuts(P) as shown in the Figure 7A. Q L P R B N Q J R P Q Figure 7A R R N P P J N Figure 7 Model shown is
  • Graco 3001636-043 | Assembly Instructions - Page 10
    in Figure 9B, tighten block brakes with a Philips screwdriver. Insert the foot casters (S) as shown in Figure 9C and tighten all bolts.Inspect the crib to make sure it is assembled correctly and all bolts are tight. D D C T Model shown is example only. Styles may vary. T Figure 9B PRINTED IN
  • Graco 3001636-043 | Assembly Instructions - Page 11
    Always verify that both ends of the dropside are locked in the raised position whenever a child is placed in the crib. Only lower the side when removing the child from the crib. LaJobi Industries. - 257 Prospect Plains Rd. Cranbury,NJ 08512-Phone: 888-266-2848 Bulletin No. A-RTAUPS01-00 11 PRINTED
  • Graco 3001636-043 | Assembly Instructions - Page 12
    TODDLER BED USE • Failure to follow these warnings and assembly instructions could result in serious injury or death from entrapment or strangulation child. • The mattress intended for use on the bed shall be a full-size crib mattress having the dimensions of 51 5/8 in. (1310mm) in length and 27 1/4
  • Graco 3001636-043 | Assembly Instructions - Page 13
    a full size bed. Simply follow step 9 & 8 & 7 in reverse order to disattach crib to get the headboard as shown in figure 12, attach it to a full size metal bed frame( NOT INCLUDED) to convert a full size bed Model
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

ASSEMBLY INSTRUCTIONS
PRINTED IN CHINA
HARDWARE AND TOOLS DIAGRAM
1
LaJobi Industries. - 257 Prospect Plains Rd. Cranbury,NJ 08512-Phone: 888-266-2848
Bulletin No. A-RTAUPS01-00
Convertible Crib
Adult assembly required. Small parts may present prior to assembly.
PARTS LIST
REF.
PART NAME
QUANTITY
A
.
Crib Ends(Top)
2
B.
Crib Ends(Bottom)
2
C.
Front Leg
2
D
.
Dropside Rail
1
E
.
Back Rail Top
1
F.
Back Rail Middle
1
G
.
Back Rail Bottom
1
H
.
Back Rail Leg
2
I.
Wooden connecting block
3
J.
Bottom
Stretcher
1
K.
Metal Spring support platform
1
L.
3 1/4 " Bolt
14
M.
2 1/4" Bolt
2
N.
1 1/2" Bolt
4
O.
3/4" Bolt
4
P.
Barrel Nuts
16
Q.
Allen Wrench
1
R.
Wood Dowels
30
S.
Casters
4
T.
Block brake
2
U.
Wood Screws 3/4″
12
M
L
Enclosed please find simple step-by-step instructions to help you quickly assemble your product. Before you begin we
recommend that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware.
3. You will need the following tools:
Philips Head screw driver
Flat head screw driver
Hammer.
To protect your parts during assembly please place them on a soft surface. To clean surface use only water on a damp cloth.
Do not use window cleaners or cleaning abrasives as it will scratch the surface and could damage the protective coating.
3 1/4"
Bolt
Barrel Nuts
Allen Wrench
Casters
Block brake
Wood Dowel
2 1/4"
Bolt
3/4"
Bolt
N
O
Model shown is
example only.
Styles may vary.
Wood Screw 3/4″
T
P
Q
R
S
1 1/2"
Bolt
U