Haier AB212BCBAA User Manual

Haier AB212BCBAA Manual

Get Haier AB212BCBAA PDF manuals and user guides View all Haier AB212BCBAA manuals
Add to My Manuals
Save this manual to your list of manuals

Haier AB212BCBAA manual content summary:

  • Haier AB212BCBAA | User Manual - Page 1
    Haier Network Air Conditioner Two by One Room Air Conditioner AB212BCBAA CONTENTS Before Use Operation Points*********** 1-2 Name of Parts 3-4 Safety Precautions********** 5-6 Operation Instruction Fan Operation 7 Auto, Cooling, Dehumidifying, Heating operation 8 Swing Operation 9 Sleep Function
  • Haier AB212BCBAA | User Manual - Page 2
    far distance control communication interface on the control panel of indoor unit. After installing the peripheral equipment according to the manual attached with the Haier made far distance control detector, the computer management or other place monitoring can be achieved to the air conditioner.
  • Haier AB212BCBAA | User Manual - Page 3
    of air conditioner When the ambient humidity is too high, in COOLING or DEHUMIDIFYING mode, there may be water dropped in the air outlet. manual attached with the Haier made far distance control detector, the computer management or other place monitoring can be achieved to the air conditioner
  • Haier AB212BCBAA | User Manual - Page 4
    using, during this period of time if there is no need to use the unit for a long time, please cut off power to prevent the air conditioner from automatically resuming to the previous setting if power failure resumes, or press the ON/OFF button to turn off the unit after power failure
  • Haier AB212BCBAA | User Manual - Page 5
    Name of Parts Indoor Unit Air outlet Air filter (inside of air inlet grille) Wire Controller Drain hose Louver Louver (inside of air outlet) Connection pipes and electric wire Air inlet grille AUTO ** ** ** ** ** ** ** ** ** ** ** **** ** **/** 3
  • Haier AB212BCBAA | User Manual - Page 6
    will show this display to remind the Used to set working mode: Auto, Cooling, Dehumidifying, user to clean the air inlet. Heating, Fan After cleaning and in*stallation, 18.Fan speed button just press the air filter reset button. Used to set fan speed: Low 7.Super/Soft operation display Fan
  • Haier AB212BCBAA | User Manual - Page 7
    is too small, do take enough measure in order to avoid lack of oxygen even if refrigerant leaks. When have to dismantle and reinstall the air conditioner, please ask the after-sales service worker to perform the work. Improper installation may cause water leakage, electric shock or fire. 5
  • Haier AB212BCBAA | User Manual - Page 8
    fuse. Do not use cable or other materials to replace the fuse, otherwise it may cause fire and other trouble. Do not put the fire devices in the places, which the air from the air conditioner can directly blow. It may cause the fire devices cannot burn completely. Do not put or use any
  • Haier AB212BCBAA | User Manual - Page 9
    Operation instruction Fan operation ** ** ** 2 ** 3 ** ** ** ** ** **** ** **/** 1 4 1 Turn on operation: FAN operation refers the air conditioner does not perform COOLING and HEATING operation, but FAN operation. In this mode, the air conditioner cannot perform AUOT FAN operation
  • Haier AB212BCBAA | User Manual - Page 10
    Operation instruction Auto/Cooling/Dehumidifying/Heating operation 2 ** ** ** ** 4 3 ** 3 ** ** ** ** ** **** ** 1 Turn after start the unit, the air conditioner will sending warm air a moment later to prevent the cold air blowing out. In Dehumidifying, when the room temperature drops
  • Haier AB212BCBAA | User Manual - Page 11
    louver manually, it may damage the louver. During COOLING and DEHUMIDIFYING, do not make the louver downwards for a long time. Because the vapor around the air outlet grille may be condensed and may have drop of water. When the infant, children, ages and the patients use the air conditioner, please
  • Haier AB212BCBAA | User Manual - Page 12
    Operation instruction Sleep operation Before going to bed, you can press the SLEEP button, the air conditioner will operate in Sleep function. The Sleep symbol disappears. Operation modes 1.In COOLING, DEHUMIDIFYING operation 1 hour later in SLEEP operation, the temperature will increase
  • Haier AB212BCBAA | User Manual - Page 13
    instruction Timer On/Off function ** ** ** ** ** ** ** ** ** ** **** ** **/** Before using TIMER function, calibrate the clock first (referring to page 4). When you wake up in the morning, before going back to home after work or after going to bed, you can let your air conditioner
  • Haier AB212BCBAA | User Manual - Page 14
    Operation instruction Timer On-Off function 1.Turn on the unit After turning on the unit, set the desired ** ** ** ** working mode. The LCD of the wire controller will
  • Haier AB212BCBAA | User Manual - Page 15
    blocked, the indoor unit may drop water. Do not put articles around the air inlet and outlet. This kind of obstacle can lower the efficiency of the air conditioner or cause unit trouble. The air conditioner can only be used in air conditioning. It can not be used in other purpose. Do not use the
  • Haier AB212BCBAA | User Manual - Page 16
    cause electric shock Use stable stand support. Please pay high attention when cleaning the unit Daily maintenance Clean the air filter Instructions: When not for cleaning, do not dismantle the air filter, otherwise it may cause trouble. When the air conditioner is used in a dusty environment
  • Haier AB212BCBAA | User Manual - Page 17
    water off, then put it in the shadow for airing. 4. Install air filter (1) Put the air filter into those extruding parts at the top of the air inlet grille. (2) Draw the handles at the back of the air inlet grille inwards to fix the air filter. 5. Close air inlet grille Referring to procedure 1. 15
  • Haier AB212BCBAA | User Manual - Page 18
    or deformation. Use soft brush, water and neutral detergent to clean, then throw the water off. Instruction *When there is too much dust* Use ventilation fan or directly spray the detergent special for kitchen ware on the air inlet grille, 10 minutes later use water to clean. 5. Install
  • Haier AB212BCBAA | User Manual - Page 19
    the dust, use water or neutral detergent. If the louver of the air conditioner is too dirty, it may be dismantled (as the following described) for the air inlet can be inserted into the louver groove, then tighten the screws. Instruction For details, please consult the after-sales service worker. 17
  • Haier AB212BCBAA | User Manual - Page 20
    proper. If the wire connection is proper. If there is abnormal phenomenon, please ask the after-sale service staffs for help. 2.Cleaning the air filter or air inlet and casing After cleaning the air filter, it must be reinstalled. 3.Turn on the power After using season 1.In a sunny day, perform half
  • Haier AB212BCBAA | User Manual - Page 21
    Troubleshooting The following phenomena are not troubles Symptom Cause The unit does DEHUMIDIFYING, no air sent In DEHUMIDIFYING operation, when out or cannot change the fan speed. the room temperature is 2 higher than the set temperature, despite of the set FAN SPEED the air conditioner
  • Haier AB212BCBAA | User Manual - Page 22
    items and treating the air conditioner, it still cannot normally work, or find the following troubles occur, please stop the unit and cut off power, then contact the after-sales service worker. The fuse and creepage breaker are often blown out; In Cooling or Dehumidifying operation, there is water
  • Haier AB212BCBAA | User Manual - Page 23
    Installation instruction Before installing, methods to the user. Additionally, give this installation manual and operation manual to the user and ask them to keep it air conditioner do not let the air and things alike get into the refrigeration system except the specified refrigerant (R22). If air
  • Haier AB212BCBAA | User Manual - Page 24
    Installation instruction Notice This manual can not include all kinds of conditions, if you have new requirements and questions, please contact with local Haier Sales Center. Warning Before installing the unit, please read this manual carefully. Improper installation may cause accidents and make
  • Haier AB212BCBAA | User Manual - Page 25
    is to avoid the image disturbance and noise caused by the above-mentioned home appliance. (Even if 1m away, if the electromagnetic wave is too strong, it needing to fixing.) Over 1500 Ceiling Over 1500 Air discharging hole Over 1500 Air Air inlet discharging hole Obstacle Over 1500 Over 1500
  • Haier AB212BCBAA | User Manual - Page 26
    890*(Ceiling opening) 950 (Decorative panel) (Instruction) The dimension of the ceiling Refrigerant pipe opening with the mark of * can 0.9m, you must use M10), their gaps refer to the dimension of air conditioner, according to the original structure and the following method to install. Wood
  • Haier AB212BCBAA | User Manual - Page 27
    Directly use angle steel or new angle steel for support. Suspending bolt Suspending of indoor unit Hoisting screw Angle steel for support Adjust the position of screw cap (underside) to make the gap between the attached washer (underside) and the ceiling is 135mm. *.Installation of indoor
  • Haier AB212BCBAA | User Manual - Page 28
    thermal insulation must be treated to gas pipe and liquid pipe. If not, it may cause water leakage.] The outdoor unit is not charged with refrigerant. When connecting the pipes to unit or dismantling the pipes from the unit, do proceed as the figure shown, use spanner and torque pincers together
  • Haier AB212BCBAA | User Manual - Page 29
    large as possible (about 10cm) Droop slant degree over 1/100 Support frame Thermal insulation material (customer self-provided) Thermal insulation treatment: Drain hose (accessory) Below 75 Below 750 Wire clamp (accessory) Instruction) *The slant of the accessory drain hose should be within 75mm
  • Haier AB212BCBAA | User Manual - Page 30
    season needing to make heating, the test also must be performed. Procedure (a)Through the air outlet and use water pump to provide the equipment with about 1000cc water. (b)In COOLING of breaker and switch and the guide of circuit, etc. please refer to the configuration of the power supply. 28
  • Haier AB212BCBAA | User Manual - Page 31
    block Wire clamp A Grounding wire end Rubber lining Electric box cover (1) This part must be sealed to prevent water from entering Rubber lining Instruction: Use seal cushion to bind *****tight not leaving any gap. Seal cushion (little size) bind the wire (inside) (outside) Attached with seal
  • Haier AB212BCBAA | User Manual - Page 32
    Installation procedure Install wire controller 1.Remove the upper cover of wire controller Upper cover of wire controller Switch The PC board is installed on the back cover of wire controller. When remove the upper cover, pay attention not to damage PC board. Screw hole Back cover of wire
  • Haier AB212BCBAA | User Manual - Page 33
    otherwise the louver may have trouble. (1) Dismantle the air inlet grille from the decorative panel Pull the pole of the air inlet grille inwards, then lift dismantle the corner cover (referring to Figure 3). Note: When the air conditioner is under use, the fixing adhesive tape can be removed, not
  • Haier AB212BCBAA | User Manual - Page 34
    material Sealing material 5~8mm Decorative panel Notice If fastening the screws improperly, it may cause the trouble as Figure 5 shown. Leakage The screw should be fastened properly. Leak air from the roof If after fastening the screw, there still is gap between decorative panel and ceiling
  • Haier AB212BCBAA | User Manual - Page 35
    (different from the actual condition) 3.Installation of air inlet grille and corner cover *(1)Install the air inlet grille *The reversed procedure to the "the preparation of decorative panel" part.***** When installing the air inlet grille, be careful not to wrap the wire of the louver
  • Haier AB212BCBAA | User Manual - Page 36
    . Requirements: Both excessive charging and less charging of refrigerant will cause the compressor trouble. It must be complied with the specified amount. 4.Discharging of pipe **For details, please refer to the pipe installation part in the manual of outdoor unit. 5.Leakage detection Use leakage
  • Haier AB212BCBAA | User Manual - Page 37
    unit should be equipped according to the operation manual of indoor unit. *Before finishing vacuumizing the refrigerant pipe system, do not supply power to to connect. *Incorrect wiring easily damage the controller of the air conditioner, or the unit cannot work normally. Wiring method 1.The
  • Haier AB212BCBAA | User Manual - Page 38
    Installation procedure Other instruction 1.Power supply The air conditioner must use a special power circuit and special air switch (40A). The wiring should be installing the refrigerant pipe, drain hose and electric wire properly, perform test run to ensure the system not have trouble. Perform test
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
No.
*
Please read this manual carefully before using
Please keep this manual for future use
AB212BCBAA
0010571570
Haier Network Air Conditioner
Two by One Room Air Conditioner
CONTENTS
Before Use
Name of Parts
************* 3-4
Safety Precautions
**********
5-6
Operation Instruction
Fan Operation
************** 7
Auto, Cooling, Dehumidifying,
Heating operation
************ 8
Timer On/Off Function
********
11
Timer On-Off Function
******** 12
Maintenance
Maintenance
*************14-18
Usersí Attention
************ 13
Installation of Indoor Unit
Installation Instruction
******
21
22
Installation Procedure
******
23*36
*
Operation Points
***********
1-2
Troubleshooting
*********** 19-20
Sleep Function
************* 10
Swing Operation
************
9