Haier DW9-TFE3ME User Manual - Page 25

Plastic items are discoloured White stains are left on crockery, glasses have a milky appearance

Page 25 highlights

en Plastic items are discoloured Not enough detergent was added to dispenser. Detergent has insuffcient bleaching properties. Use a detergent containing a chemical bleaching agent. White stains are left on crockery, glasses have a milky appearance Not enough detergent was added to dispenser compartment. Amount of rinse-aid was set too low. Although water is quite hard, no salt has been put in appliance. Water softener was set too low. Lid on salt container is not screwed tight. If you used a phosphate-free detergent , try a detergent containing phosphates and compare results. Dishes,cultlery,etc.have not been dried Selected programme did not include drying function. Amount of rinse-aid was set too low. Items were removed from dishwasher too soon. Glasses have a dull appearance Amount of rinse-aid was set too low. Tea stains or traces of lipstick have not been completely removed Detergent does not have a sufficient bleaching effect. Washing temperature was set too low. Traces of rust on cutlery Cutlery is not sufficiently rustproof. Salt content in washing water is too high. - Lid on salt container is not screwed tight. - Too much salt was spilt while filling container. Glasses become clouded and discoloured; coating cannot be wiped off Unsuitable detergent was used. Glasses are not dishwasher-proof. Smears left behind on glasses and cutlery; glasses have acquired a metallic appearance Amount of rinse-aid set too high. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

24
Not enough detergent was added to dispenser.
Detergent has insuffcient bleaching properties. Use a detergent containing a chemical bleaching agent.
P
lastic items are discoloured
N
ot enough detergent was added to dispenser compartment.
Amount of rinse-aid was set too low.
Although water is quite hard, no salt has been put in appliance.
Water softener was set too low.
Lid on salt container is not screwed tight.
If you used a phosphate-free detergent , try a detergent containing phosphates and compare results.
W
hite stains are left on crockery, glasses have a milky appearance
S
elected programme did not include drying function.
Amount of rinse-aid was set too low.
Items were removed from dishwasher too soon.
D
ishes,cultlery,etc.have not been dried
A
mount of rinse-aid was set too low.
G
lasses have a dull appearance
D
etergent does not have a sufficient bleaching effect.
Washing temperature was set too low.
T
ea stains or traces of lipstick have not been completely removed
C
utlery is not sufficiently rustproof.
Salt content in washing water is too high.
T
races of rust on cutlery
U
nsuitable detergent was used.
Glasses are not dishwasher-proof.
G
lasses become clouded and discoloured; coating cannot be wiped off
A
mount of rinse-aid set too high.
S
mears left behind on glasses and cutlery; glasses have acquired a metallic appearance
-
Lid on salt container is not screwed tight.
- Too
much salt was spilt while filling container.
en