Haier HDT18PA User Manual - Page 13
Vented Dry On/Off, Rincer et tenir cycle, Understanding the Venting Process - drain
UPC - 688057190419
View all Haier HDT18PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GB Rincer et tenir cycle: This cycle is used for rinsing partial loads that will be washed later. The total wash time for "Wash Only" cycle is approximately 6 minutes. Note: Do not use detergent with this cycle. Vented Dry (On/Off): You can select this option at the beginning of the wash cycle to dry your dishware items. Press the button in to have vented dry option "On" or press the out to have vented dry option "Off". Note: When selecting any of the above cycles or options, you will see the following: It will take approximately 60 seconds to begin the wash cycle. In wash mode, light will come on indicating that wash cycle is selected. In dry mode, light will come on indicating that dry cycle is selected. The buzzer will beep at the end of the cycle indicating that cycle is completed. Warning: When you leave the door open to air dry those washed items, make sure there are no children around to go near the dishwasher to climb over. If there are children around near the dishwasher, pay careful attention and observation toward children. Understanding the Venting Process: In this process, the hot steam from the dishwasher is being drawn into the drain pump through its vacuum force and the mix condensation of water and air is being discharged through the discharge hose from the back of the unit. TUB hohtot stsrtereaamm ddrarianihnosheose ddrarainin ppuummpp hhoottaairir anadnd wwataerter one-ownaey -vwalvaey valve 12