Haier HHN1230DBBB HHV2230 Manual
Haier HHN1230DBBB Manual
 |
View all Haier HHN1230DBBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier HHN1230DBBB manual content summary:
- Haier HHN1230DBBB | HHV2230 Manual - Page 1
Range Hood Extractor de Aire Hotte de Cuisinière User Manual Model 1000/2000 Series Guide de l'Utilisateur 1000/2000 Series Manual del Usuario Modelo 1000/2000 Series - Haier HHN1230DBBB | HHV2230 Manual - Page 2
servicing or cleaning unit, switch power off at service panel and lock the service disconnection means to prevent power from being switched on accidentally. When the service Association (NFPA), and the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local - Haier HHN1230DBBB | HHV2230 Manual - Page 3
ordinances. 1. For general ventilation use only. Do not use this appliance to exhaust hazardous or explosive materials and vapors. 2. To reduce INSTRUCTIONS for Future Use Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best performance from your Haier - Haier HHN1230DBBB | HHV2230 Manual - Page 4
Operating the Range Hood 10-11 Use and Care 12 Troubleshooting 13 Warranty Information 14 Accessories Range Hood Accessories Provided: Screws* 4 Washers 4 Range Hood Wood Screws 2 Wire Connectors 1 Charcoal Filter (not included with 1000 series models) 1 Aluminum Filter 1 User Manual * Included - Haier HHN1230DBBB | HHV2230 Manual - Page 5
English Installation Preparation To install this range hood, you will need the following tools and materials: Note: This procedure will require 2 people for easier installation. Tools Needed for Installation t Drill t 1/8" Drill bit for drilling pilot holes t 1-1/4" Wood bit for drilling electrical - Haier HHN1230DBBB | HHV2230 Manual - Page 6
English Preparing Hood 1. (Skip to step 2 if you have 1000 series model.) Remove 7" Round Duct Plate and 3¼" x 10" Damper from inside of the hood. Set duct plate and damper aside - with mounting screws. 7" Round Duct Plate 3¼" x 10" Damper 2. Remove tab holding aluminum filter in place.Pull - Haier HHN1230DBBB | HHV2230 Manual - Page 7
English 4. Remove the appropriate electrical knockout by inserting a screwdriver. Then snip or break the attachment points. 5. Remove either top or back wiring knockout and install approved electrical conduit according to national electrical code. Non-Ducted Installation - Skip to "Preparing - Haier HHN1230DBBB | HHV2230 Manual - Page 8
English 7 Insert the vent cover into the slot on the front of the range hood. 8. Fasten the vent cover with 2 screws supplied. (2) #8 Screws 9. Remove appropriate Duct Knockout(s) from top or back of hood. TOP RECTANGULAR DUCT KNOCKOUT (Remove for 3¼" x 10"Vertical & for 7"Round Discharge) SEMI- - Haier HHN1230DBBB | HHV2230 Manual - Page 9
English Preparing Electrical Connections WARNING: To reduce the risk of electric shock, make sure power is switched off at the service panel. Lock or tag service panel to prevent power from being switched on accidentally. 1. Connect House Wiring (120 VAC) to hood. Use a piece of Cardboard to protect - Haier HHN1230DBBB | HHV2230 Manual - Page 10
English Installing Hood 1. Hang hood from (4) Mounting Screws (from parts bag). Be sure to place a washer (included) onto each screw before driving in the screw. Slide hood towards wall until mounting screws are engaged in narrow end of (4) Keyholes. Tighten mounting - Haier HHN1230DBBB | HHV2230 Manual - Page 11
To turn off the lights, turn the knob selector counter-clockwise to return the knob selector to it's original position. Fan Speed Settings Your new Haier range hood comes equipped with 3 different fan speeds: "low", "med", or "high". To turn on the fan, simply turn the knob selector to the position - Haier HHN1230DBBB | HHV2230 Manual - Page 12
press the switch corresponding to the light. To turn off the light, put the switch back in the original position. Fan Speed Settings Your new Haier range hood comes equipped with 2 different fan speeds: "low" or "high". To turn on the fan, simply press the switch to place in position of - Haier HHN1230DBBB | HHV2230 Manual - Page 13
Repair or Replacement Parts Warning! Disconnect range hood from the electrical power supply before servicing. All parts may be obtained from service centers authorized by Haier, or may be ordered directly from Haier. When ordering parts, please specify the range hood model number on the rating label - Haier HHN1230DBBB | HHV2230 Manual - Page 14
turns on. This is probably due to either a defective fan switch or a burned-out fan motor. Fan only runs at one speed. Please see instructions above for troubleshooting when your fan does not turn on, but lights turn on. Fan circulates air, but does not vent outside. (applies only to 2000 series - Haier HHN1230DBBB | HHV2230 Manual - Page 15
of 12 months. How can you get service? 1. Contact your nearest Haier authorized Service Center. For the name of the Service Center nearest you, contact Haier at (877) 337-3639. 2. All service must be performed by an authorized Haier Service Center. THIS WARRANTY COVERS UNITS WITHIN THE CONTINENTAL - Haier HHN1230DBBB | HHV2230 Manual - Page 16
Store If you have a problem with this product, please contact the "Customer Satisfaction Center" at 1-877-337-3639. DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE IMPORTANT Ne pas Réexpé China Fabriqué en Chine Hecho en China Haier New York, NY 10018 Printed in China 1000/2000 Series ©2011
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
User Manual Model
1000/2000 Series
Guide de l’Utilisateur
1000/2000 Series
Manual del Usuario Modelo
1000/2000 Series
Range Hood
Extractor de Aire
Hotte de Cuisinière