Home » Haier Manuals » Laundry Washers » Haier HLP021WM » Manual Viewer

Haier HLP021WM User Manual

Haier HLP021WM - PULSATOR Portable Washer Manual

View all Haier HLP021WM manuals

Add to My Manuals
Save this manual to your list of manuals

Haier HLP021WM manual content summary:

Haier HLP021WM | User Manual - Page 1
Load Washer French Spanish Welcome to the world of Haier Compact Portable Laundry! • Efficient, Compact and Portable • Easy Installation and Use • Uses Convenient Standard120VAC -15 amp Outlets • You can install them anywhere! CYCLE QUICK WASH HEAVY STATUS NORMAL PO O S P User Manual HLP021-WM
Haier HLP021WM | User Manual - Page 2
your washer. Remember to record the model and serial number. They are on a label in back of the washer. Model number Serial number Date of purchase Staple your receipt to your manual. You will need it to obtain warranty service. Please register your product online at www.prodregister.com/haier 1
Haier HLP021WM | User Manual - Page 3
basic precautions, including the following: 1. Read all instructions before using the appliance. 2. Use this appliance only for its intended purpose as described in this use and care guide. 3. Use only detergents or softeners as recommended for use in this manual and keep them out of the reach of
Haier HLP021WM | User Manual - Page 4
appliances, smoking, lighting a match/lighter, and using flames. 23. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-repair instructions, which you understand and have the skill to carry out. Note: If for any reason this product
Haier HLP021WM | User Manual - Page 5
English Electrical Requirements Grounding Instructions WARNINGS: This appliance must be grounded. It is circuit breaker before attempting any maintenance or cleaning (except the removal and cleaning of the lint filter). Note: Pressing the Power ON/OFF button to an off position or pressing
Haier HLP021WM | User Manual - Page 6
PAGE SAFETY INSTRUCTIONS 1-2 PARTS AND FEATURES 4-5 OPERATING YOUR WASHER 6-11 UNPACKING AND ACCESSORIES INVENTORY 12 PROPER LOCATION 13 INSTALLATION INSTRUCTIONS 14-16 UNIT DIMENSIONS 17 ELECTRICAL CONNECTIONS 18 PROPER CARE AND CLEANING 19 TROUBLESHOOTING GUIDE 20-21 WARRANTY 22 5
Haier HLP021WM | User Manual - Page 7
: The bottom panel is located between the top foam used for protection and box. Parts a) 1 Bottom Panel b) 6 Screws for the Bottom Plate c) 1 Water Inlet Hose d) 1 Drain Hook (Gooseneck) f) 1 Quick Sink Faucet Adapter g) 2 Washers h) 1 Lint Filter fi) 4 Caster e) 1 Wrench FRONT FACE TO FLOOR
Haier HLP021WM | User Manual - Page 8
English washer parts and features Front View 1 CYCLE QUICK WASH HEAVY STATUS NORMAL PO O S P 2 6 3 5 4 1. Top Lid 2. Control Panel 3. Washer Cabinet 4. Front Leveling Leg (or for Caster) Back View 7 8 5. Cabinet Handle (located on both sides of the washer) 6. Control panel 10 11 9 12
Haier HLP021WM | User Manual - Page 9
Button Choose washing cycle Normal - Normal Wash Heavy - Huge and heavy garments Quick Wash - Small loads that are washer. 1 2 3 4 HLP021-WM CYCLE QUICK WASH HEAVY STATUS NORMAL Water Level Selector Knob Select water height in drum based on laundry being washed. Med i um High Low Manual
Haier HLP021WM | User Manual - Page 10
instructions for normal wash 1. Locate the best place for using your NEW compact portable washer. Make sure it is near a 120 volt outlet and a water source, like a sink, with a drain. FRONT 2. Screw on the bottom plate with the six (6) screws provided. FACE TO FLOOR 3. Connect the water inlet hose
Haier HLP021WM | User Manual - Page 11
17-1/4" 29-15/16" 38-5/8" 17-5/8" 17-5/8" installation instructions Read carefully and understand all installation instructions before installing this washing machine. If after completing the process you are still unsure whether the washer has been properly installed, we recommend that you
Haier HLP021WM | User Manual - Page 12
wash cycle operation. 1. First, lay down the washer on its front side. FRONT 2. Place the panel against the bottom of the machine. washer to its standing position. FRONT FACE TO FLOOR Note: During this time, you may reroute the drain hose to the left or right side for draining. Just remove hose
Haier HLP021WM | User Manual - Page 13
of the fixed foot. This should be done for all feet of the washer. Note: If the washer is inclined more than 2˚, the machine will not operate. Caster Option This washer can convert from fixed feet to casters for mobility and portability. The best time to change from fixed feet to casters is when
Haier HLP021WM | User Manual - Page 14
English Installing Your Washer Read the installation instructions carefully and ensure washer location before beginning. Installing Quick end of the water inlet hose to the washer water inlet and make sure that the rubber washer is placed in between. Attached hose to water inlet Sink Faucet
Haier HLP021WM | User Manual - Page 15
must be installed before the washer is used. The lint filter is packaged with the User Manual. 8. Plug in the washer to a regular 115 Volt / 60 Hz, 15 Amps outlet, only after all water and drain lines are connected . Note: Carefully inspect for any leaks around the machine and at the back. If
Haier HLP021WM | User Manual - Page 16
Low Manual Wat er Lev el 1 HLP021-WM CYCLE QUICK WASH HEAVY STATUS NORMAL Power ON/OFF: (1) • Press the POWER button once to turn ON the power to the washer. settings depending on the wash load. There is also a MANUAL overide, by holding the knob in the manual position, until the desired
Haier HLP021WM | User Manual - Page 17
. Lint Filter and Water Filter • The Lint filter is located inside the washer drum. A small nylon bag collects lint and residue from clothes during the wash cycle. Note: NEVER wash your clothes without the filter in its compartment inside the tub. • You must clean the filter after every load for
Haier HLP021WM | User Manual - Page 18
. Start Pause • With POWER ON, Press the "CYCLE Select" button for your desired wash cycle. Choose between 7 various washing cycles options. Each time you press the CYCLE button, you will move throught the washers cycle menu. When you finalize your selection, please press the START button. CYCLE
Haier HLP021WM | User Manual - Page 19
inlet time and drain time. The total washing time may be wash time includes the pre-wash time. • In the "Quick" program select wash, (fast wash, for delicates) rinse and spin are set automatically. No procedure can be selected after setting. Note: When you turn the power OFF, then ON; the machine
Haier HLP021WM | User Manual - Page 20
The machine will beep at the end of the cycle, indicating that the washing is complete. The "Wash/Rinse/Spin" indicator lights will still be ON. The washer will turn OFF automatically in approximately 10 minutes after the completion of the cycle. Closing the Top Lid For safety purposes, the top lid
Haier HLP021WM | User Manual - Page 21
level. • Add the detergent. • Load the washer. • Select the water level. Note: The amount of detergent used depends on the size of the load, the water type (hard or soft) and whether the clothes are heavily soiled or lightly soiled. Besides the performance of the washing machine, the quality of the
Haier HLP021WM | User Manual - Page 22
inner washtub. If moving the washer, disconnect the drain hose. • To prevent mold and mildew, leave the door open so that the moisture inside the machine can evaporate. • Reinstall the foam base/Styrofoam at the bottom of the unit to prevent internal parts from becoming damaged due to vibrations
Haier HLP021WM | User Manual - Page 23
heard during the operation of the washer: • Tumbling sounds can be heard as heavy wet clothes in the washer are tossed around continuously. • Air rushing noise is the result of the washtub spinning at a very high RPM. • Clicking sounds are caused by the wash and rinse cycles turning ON and
Haier HLP021WM | User Manual - Page 24
English troubleshooting guide Before calling for service, determine the symptoms and follow the suggested solutions: Washer does not operate: The pulsator pauses during incoming water flow in the wash and rinse cycle. This is normal. This prevents splashing during water inlet. • The washer may need
Haier HLP021WM | User Manual - Page 25
the drain hose. The drain hose may be clogged or bent. • Water flows out of the drain hose during the first use of the machine - This may be the water left in the tub after the factory inspected the unit to test its performance in order to ensure the best quality. Washer makes noises: • Washer may
Haier HLP021WM | User Manual - Page 26
lights up and the washer starts to fill with water - The wash load is slanting on one side. After the water is filled, the slanting will be removed and the spinning will be reactivated. Welcome to the world of Haier Compact Portable Laundry! • Efficient, Compact and Portable • Easy Installation and
Haier HLP021WM | User Manual - Page 27
product modification, alteration or adjustment not authorized by Haier. Adjustment of consumer operated controls as identified in the owner's manual. Hoses, knobs, lint trays and all attachments, accessories and disposable parts. Labor, service transportation, and shipping charges for the removal
Haier HLP021WM | User Manual - Page 28
Do Not Return This Product To The Store If you have a problem with this product, please contact the "Haier Customer Satisfaction Center" at 1-877-337-3639. DATED PROOF OF PURCHASE, MODEL # AND SERIAL # REQUIRED FOR WARRANTY SERVICE IMPORTANT Ne pas renvoyer cet appareil au magasin. Si vous avez un