Haier HW55-1010 User Manual

Haier HW55-1010 Manual

Haier HW55-1010 manual content summary:

  • Haier HW55-1010 | User Manual - Page 1
    AUTOMATIC DRUM WASHING MACHINE USER MANUAL HW55-1010 HW55-1010ME
  • Haier HW55-1010 | User Manual - Page 2
    >CONSUMPTION AND TECHNICAL DATA .. 11 >TROUBLESHOOTING 19 >WASHING METHODS 12 >SETUP 14 LEGEND Yes No Optional For your safety, any instructions in this manual with this "Warning" sign must be local city office,your household waste disposal service or the shop where you purchased the product.
  • Haier HW55-1010 | User Manual - Page 3
    instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. Keep this manual sure you also pass on this manual so that the new owner can become
  • Haier HW55-1010 | User Manual - Page 4
    This diagram may be slightly different from the layout of the washing machine you have just purchased due to technical improvements. Drain hose Water inlet value Power cord Back cover Back cover screws Transportation bolts HW55-1010 Synthetic 30。C Cold Wool 40。C Spin Power Quick Cotton Pre
  • Haier HW55-1010 | User Manual - Page 5
    . Wipe clean the lower part of the porthole. ... Keep the door slightly open when the washing machine is not in use to prevent formation of odours. ... Let the power cord be replaced by the manufacturer, his service agent or other accordingly qualified persons, in case it is damaged. ... Ensure that
  • Haier HW55-1010 | User Manual - Page 6
    USE INSTALLATION ADJUSTING THE BOTTOM COVER When open the carton package, you will find a metalline board which is laid on the top of the washing machine as shown fig.1, the board used for reducing noise and rat proof by install it under the cabinet when setting as shown in fig.2. DISMANTLE THE
  • Haier HW55-1010 | User Manual - Page 7
    fixed and leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less than 80cm, the washing machine will continuously drain while being filled (self-siphoning). CONNECTING TO THE POWER SUPPLY Before connecting to the power supply, check: ¬ The socket is adequate for
  • Haier HW55-1010 | User Manual - Page 8
    08 CONTROL PANEL HW55-1010 USING THE APPLIANCE G Synthetic 。 30C Cold Wool 。 40C Spin Power Quick Cotton Pre-Wash 90。C 。 60C 。 40C Remaining Time detergent 2: Main wash detergent 3 :Fabric softener 2 3 1 B ¬ Power Button _ Press this button to switch on the washing machine. Press and
  • Haier HW55-1010 | User Manual - Page 9
    lightly, the indicator light will be light on . you can increase the washing time, rinsing times in main wash stage of the selected program, which is suitable for dirty clothes. F ¬Start/Pause Button When the washing machine is connected to the power socket and a program is selected, lightly touch
  • Haier HW55-1010 | User Manual - Page 10
    10 PROGRAM SELECTION PROGRAM MODES USING THE APPLIANCE 2 3 1 1 Detergent compartment for prewash mode 2 Detergent compartment 3 Compartment for softener and other additives PrProgramogramm Temperature 2 33 1 ¬ Prewash 60°C 1 Recommended Laundryne Very heavy soiling Preset spin speed 1000
  • Haier HW55-1010 | User Manual - Page 11
    Max. working current (A) Water pressure (MPa) Nominal load (kg) Spinning speed (r/min) Washing programs Max power (W) Dimensions (HxDxW mm) Net weight (kg) HW55-1010 220 - 240V~/50Hz 10 0.03≤P ≤1 5.5 1000 9 2000 850 x 520 x 595 65 HW55-1010ME 220 - 240V~/50Hz 10 0.03≤P ≤1 5.5 1000 9 2000 850
  • Haier HW55-1010 | User Manual - Page 12
    .Do not use it for purposes other than that for which it was designed. Follow the instructions given on the label of each garment and wash only machine-washable garments. POWER SUPPLY Connect the washing machine to the power supply (220V to 240V~/50Hz). WATER CONNECTION Turn on the tap. The water
  • Haier HW55-1010 | User Manual - Page 13
    washing machine. Before washing you should run the machine without laundry, but with detergent, with 60°C programm. ¬ Do not overload the washing machine. SELECTING DETERGENT The washing compartment 1. ¬ Use liquid detergent according to the instructions on its package. Do not use liquid detergent if
  • Haier HW55-1010 | User Manual - Page 14
    , which is suitable for dirty clothes Remaining Time stop speed strong Start/Pause Remaining Time speed strong Start/Pause START WASHING When the washing machine is connected to the power socket and a program is selected,lightly Remaining Time touch this button to start operation. During
  • Haier HW55-1010 | User Manual - Page 15
    USING THE APPLIANCE 15 CARE CHART Resistant material Delicate fabric Washable at 95 °C Washable at 60 °C Washable at 40 °C Washable at 30 °C Hand wash Dry clean only Wool Seal Bleachable in cold water Do not bleach Iron at 200 °C Iron at 150 °C Iron at 100 °C Don't iron Dry cleaning
  • Haier HW55-1010 | User Manual - Page 16
    off the water supply and pull out electricity plug after each wash. Open the washer door to prevent formation of moisture and odours. If the washing machine is left idle for a long period, drain the water in the machine and replace the drain hose. CLEANING THE DETERGENT DRAWER 1. 2. Clean the
  • Haier HW55-1010 | User Manual - Page 17
    bolts. 4. Tighten the bolts with a spanner. 5. Replace the back cover. 3. 4. 5. LONG PERIODS OF DISUSE b 30 C b 40 C b 90C b 60C b 40 C If the washing machine is left idle for a long period, pull out the electrical plug and turn off the water supply. Open the washer door to prevent
  • Haier HW55-1010 | User Manual - Page 18
    . _ Reduce load and then start washing again. If problem still exists, please contact the maintenance personnel twinkle completely for 15 mins,then the washing machine will go on washing. of course, you can touch " automatically cancelled. Turn the program selector again to choose another program.
  • Haier HW55-1010 | User Manual - Page 19
    MAINTENANCE 19 TROUBLESHOOTING TROUBLESHOOTING The following circumstances do not constitute problems. Do not contact the Service Center until the problem has been confirmed. PROBLEM CAUSES SOLUTIONS Washing machine fails to operate. ¬ Poor connection to the power supply. ¬ Power failure. ¬
  • Haier HW55-1010 | User Manual - Page 20
    20 MAINTENANCE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

AUTOMATIC DRUM WASHING MACHINE
USER MANUAL
HW55-1010
HW55-1010ME