Haier HWM-13.0 User Manual

Haier HWM-13.0 Manual

Get Haier HWM-13.0 PDF manuals and user guides View all Haier HWM-13.0 manuals
Add to My Manuals
Save this manual to your list of manuals

Haier HWM-13.0 manual content summary:

  • Haier HWM-13.0 | User Manual - Page 1
    Twin-tub Washing Machine with Pump User's manual This manual is for HWM-13.0/S Please read this manual carefully before using. Retain it for future reference. 003080
  • Haier HWM-13.0 | User Manual - Page 2
    Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-Shooting *Answer to question Packing list Specification
  • Haier HWM-13.0 | User Manual - Page 3
    Names of the parts Buzzer Water-filling entrance Water inlet selector handle Wash selector Wash timer Control panel Overflow filter Quick water-filling entrance Drain hose surpport Water level adjusting lever Lint filter(installed by user) Pulsator Wash tub Drain hose Wash tub cover Base frame
  • Haier HWM-13.0 | User Manual - Page 4
    machine is being moved, cleaned or when it is idle. If the supply cord is damaged,it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Do not put the machine at damp place like the bathroom . Never wash it with
  • Haier HWM-13.0 | User Manual - Page 5
    Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing
  • Haier HWM-13.0 | User Manual - Page 6
    Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package, please take out the lint
  • Haier HWM-13.0 | User Manual - Page 7
    How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Extend the drain hose from the side of spin tub. Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the
  • Haier HWM-13.0 | User Manual - Page 8
    Install the water inlet hose; Select the water level Insert the water inlet hose into the water-filling entrance on the control pane directly.(pull it out to dismantle it) Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Water
  • Haier HWM-13.0 | User Manual - Page 9
    Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put the drain hose up to suitable
  • Haier HWM-13.0 | User Manual - Page 10
    prone to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. powder is different. Please refer to the instruction of the washing powder for the detail dosage. 8
  • Haier HWM-13.0 | User Manual - Page 11
    current, strong current) Water-filling entrance Wash timer (To set to below 2 minute, first set to 6 minute then turn it back. it can increase the service life of the timer). Buzzer (The buzzer will ring when the washing finishes) Spin timer (to set to below 1 minute, first set to 2 minute then
  • Haier HWM-13.0 | User Manual - Page 12
    Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper The laundries Proper No gland are slanting (2) Close the inner and outer cover of
  • Haier HWM-13.0 | User Manual - Page 13
    Rinsing Rinse with water-filling 1.Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. OVERFLOW If you find
  • Haier HWM-13.0 | User Manual - Page 14
    Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally
  • Haier HWM-13.0 | User Manual - Page 15
    Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must
  • Haier HWM-13.0 | User Manual - Page 16
    Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 4. Install the overflow filter. (1).
  • Haier HWM-13.0 | User Manual - Page 17
    Trouble-shooting Answer to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of
  • Haier HWM-13.0 | User Manual - Page 18
    Trouble-shooting Answer to question (If there's breakdown, please pull off the power to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason The machine does not
  • Haier HWM-13.0 | User Manual - Page 19
    Packing list Name User's manual Warranty card Water inlet hose Lint filter Quantity One piece One piece One piece Two pieces Water-filling jointer One piece Gland Twin-tub washing
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
This manual is for
HWM-13.0/S
Please read this manual
carefully before using.
Retain it for future reference.
Twin-tub Washing Machine with Pump
User's
manual
003080