Haier HWM50-10B User Manual
Haier HWM50-10B Manual
 |
View all Haier HWM50-10B manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier HWM50-10B manual content summary:
- Haier HWM50-10B | User Manual - Page 1
Full Automatic Washing Machine User's manual User's manual This manual is for HWM50-10B Please read this manual carefully before using. Retain it for future reference. 0030805169G - Haier HWM50-10B | User Manual - Page 2
adjustment 4 Install the water inlet hose 6 Preparation before washing 8 Put in the laundries 9 Usage of the detergent 9 Use the operation buttons 10 Close the top lid 13 Finish washing ...13 Disposal after washing 14 Trouble shooting· Answer to question 15 Packing list· Specification 16 - Haier HWM50-10B | User Manual - Page 3
Names of the parts Top lid B Lint filter（two） Control panel Filter cover Inner tub Pulsator Control panel film Cabinet Top lid A Water valve Notice label Detergent box Hanging hole for the drain hose Power cord Adjustable foot stick Back cover Adjustable foot Water absorption cushion Handle - Haier HWM50-10B | User Manual - Page 4
power plug becomes flexible, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with dry cloth carefully. Do not - Haier HWM50-10B | User Manual - Page 5
lint filter in good condition, and install it to proper position. If the lint filter is lost or damaged, please contact the local after-sales service department of our company. To protect your laundries and washing machine, please take out all of the coins, buttons, sand, hairpin and other foreign - Haier HWM50-10B | User Manual - Page 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Push the lint filter downward to location for lint - Haier HWM50-10B | User Manual - Page 7
How to change the direction of the drain hose 1.Dismantle the back cover of the washing machine. 2.Put down the drain hose. Take off the drain hose frame. As indicated in Figure 1, put the drain hose into the cabinet. Then stretch one hand into the cabinet to nip the claw of the drain hose bushing - Haier HWM50-10B | User Manual - Page 8
Install the water inlet hose Confirm the water tap Water tap,suitable Outlet end surface >10mm Water tap,not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. Connection - Haier HWM50-10B | User Manual - Page 9
Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption Nut of the wa ter inlet hose cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut - Haier HWM50-10B | User Manual - Page 10
Preparation before washing Preparation before washing 1.Connect the water inlet hose and open the water tap . 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the - Haier HWM50-10B | User Manual - Page 11
on laundries with color or pattern as they are prone to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before use. Direct dissolved in the machine 1.Fill water to "Low - Haier HWM50-10B | User Manual - Page 12
: 1. After pressing "POWER ON/OFF" to connect power supply, if the washing machine lasts idle more than 5 min, it would automatically shut off the supply. 10 - Haier HWM50-10B | User Manual - Page 13
can press the button "PROGRAM/RESERVATION" to get the corresponding indicator on. Refer to the "Button of "PROGRAM/RESERVATION" paragraph on page 10. Page 10 Example: Use the "Quick" program for slightly soiled articles. When "standard" program is selected, the washing machine will perform full - Haier HWM50-10B | User Manual - Page 14
below 1 kg Wash (bb) Rinse(cc) Spin(dd) 4 WASH Repeat using the washing liquid Wash (bb) When the laundries need only 5 SPIN spinning after manual washing (first drain then spin) Spin(dd) If you push the " PROGRAM/RESERVATION" button for 6 times, it will resume the original mode, and it - Haier HWM50-10B | User Manual - Page 15
" to sel ect a wat er level accor di ng to the load. Please ref er to the but ton " Wat er level " on page 10. Page 10 4 Push the " PROGRAM/ RESER VAT ION" button to select suitable reser ve program PROGRAM RESERVATION After switching on, the washing machine reserved wash program will - Haier HWM50-10B | User Manual - Page 16
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. When washing, lint filter must be used After using, please - Haier HWM50-10B | User Manual - Page 17
Trouble shooting·Answer to question (If there's breakdown, please pull off the to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena Buzzing upon reservation starts, Nixie - Haier HWM50-10B | User Manual - Page 18
Packing list Name User 's manual Components of the water inlet hose Lint filter Bot tom pl at e Tappi ng sc rews Quantity One piece One piece Two pieces One piece
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
