Haier HWM55-13S User Manual

Haier HWM55-13S Manual

Get Haier HWM55-13S PDF manuals and user guides View all Haier HWM55-13S manuals
Add to My Manuals
Save this manual to your list of manuals

Haier HWM55-13S manual content summary:

  • Haier HWM55-13S | User Manual - Page 1
    Twin-tub Washing Machine User's manual This manual is for HWM55-13S Please read this manual carefully before using. Retain it for future reference.
  • Haier HWM55-13S | User Manual - Page 2
    Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-shooting *Answer to question Packing list *Specification
  • Haier HWM55-13S | User Manual - Page 3
    Names of the parts Buzzer Water-filling entrance Water inlet selector handle Wash selector Wash timer Control panel Overflow filter Wash water-filling entrance Water level adjusting lever Lint filter Pulsator Wash tub Base frame Drain hose Wash tub cover Outer cover of the spin tub Inner cover of
  • Haier HWM55-13S | User Manual - Page 4
    the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean. Do not put the machine at damp place like the bathroom . Never wash it with water
  • Haier HWM55-13S | User Manual - Page 5
    Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing
  • Haier HWM55-13S | User Manual - Page 6
    Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. If you do not need spraying spin, you can Quick water-filling entrance
  • Haier HWM55-13S | User Manual - Page 7
    How to change the direction of the drain hoses Figure 1 indicates the leave factory installation position of the drain hose. Soft item Extend the drain hose from the side of wash tub Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off
  • Haier HWM55-13S | User Manual - Page 8
    Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting
  • Haier HWM55-13S | User Manual - Page 9
    to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. 7
  • Haier HWM55-13S | User Manual - Page 10
    first set to 6 minute then turn it back. it can increase the service life of the timer). Wash selector (Standard current, strong current) Water , first set to 2 minute then turn it back. it can increase the service life of the timer). OFF SILK WOOL COTTON LINEN WASH TIMER STRONG STANDARD DRAIN
  • Haier HWM55-13S | User Manual - Page 11
    Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper The laundries Proper No gland are slanting (2) Close the inner and outer cover of
  • Haier HWM55-13S | User Manual - Page 12
    timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.4kg, please use "Standard" current. If you use "Strong" current, it may splash. 10
  • Haier HWM55-13S | User Manual - Page 13
    Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally
  • Haier HWM55-13S | User Manual - Page 14
    Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must
  • Haier HWM55-13S | User Manual - Page 15
    Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). Water level adjusting lever Corrugation Pipe 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap
  • Haier HWM55-13S | User Manual - Page 16
    Trouble-shooting Answer to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of
  • Haier HWM55-13S | User Manual - Page 17
    sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason The machine does not act. Is there power failure? Is
  • Haier HWM55-13S | User Manual - Page 18
    Packing list Name User's manual Water inlet hose Lint filter Gland Water-filling jointer Twin-tub washing machine Quantity One piece One piece One piece One piece One piece One
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
Twin-tub Washing Machine
User's
manual
This manual is for
HWM55-13S
Please read this manual
carefully before using.
Retain it for future reference.