Haier HWM58-020 User Manual
Haier HWM58-020 Manual
 |
View all Haier HWM58-020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier HWM58-020 manual content summary:
- Haier HWM58-020 | User Manual - Page 1
Fully Automatic Washing Machine User's manual This manual is for HWM58-020 Please read this manual carefully before using. Retain it for future reference. - Haier HWM58-020 | User Manual - Page 2
of the parts 1 Safety precautions 2 Installation and adjustment 4 Install the water inlet hose 6 Preparation before washing 8 Put in the laundries 9 Usage of the detergent 9 Use the operation buttons 10 Close the top lid 13 Finish washing ...13 Disposal after washing 14 Trouble shooting - Haier HWM58-020 | User Manual - Page 3
Names of the parts Top lid B Detergent box Lint filter(Installed by user) Control panel Filter cover Inner tub Control panel film Pulsator Cabinet base frame Top lid A Sop mat Cabinet handle Drain hose water valve Power line Adjustable foot back cover fixed foot (3) Meaning and - Haier HWM58-020 | User Manual - Page 4
shop or the after-sale service department. Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with dry cloth carefully. Do not put the machine at damp place like Do not use water hotter above 50 C . the bathroom. Never wash it with water. Not put - Haier HWM58-020 | User Manual - Page 5
in good condition, and install it to proper position. If the lint filter is lost or damaged, please contact the local after-sales service department of our company. To protect your laundries and washing machine, please take out all of the coins, buttons, sand, hairpin and other foreign materials - Haier HWM58-020 | User Manual - Page 6
to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Push the lint filter downward to location for lint filter. Install the bottom plate After you open the package, please lean the washing machine gently down on soft - Haier HWM58-020 | User Manual - Page 7
change the direction of the drain hose 1.Dismantle the back cover of the washing machine. 2.Put down the drain hose. Take off the drain than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2.Do not trample or press the drain hose. 4.If extra - Haier HWM58-020 | User Manual - Page 8
Install the water inlet hose Confirm the water tap Water tap,suitable Outlet end surface >10mm Water tap,not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. Connection - Haier HWM58-020 | User Manual - Page 9
Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption Nut of Press the locking lever. Push down the slider. Then pull off the water inlet hose. If the machine is used more than once every week, the jointer of the water inlet hose can be kept on the - Haier HWM58-020 | User Manual - Page 10
part with serious soil directly. It is much easier to remove the soil by that mean. e. For laundries likely to get lint ball or with long fiber, please first turn the inside out before putting them into the water. f. Do not put the laundries polluted with chemicals directly into the washing machine - Haier HWM58-020 | User Manual - Page 11
to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before use. Direct dissolved in the machine 1.Fill water to "Low" water level. 2.Add the power. Run for 30 seconds to - Haier HWM58-020 | User Manual - Page 12
of reservation. The nixie tube displays the reserved hours to the wash cycle end. The indicator flashes to indicate in-reservation. Remarks: 1. After pressing "POWER ON/OFF" to connect power supply, if the washing machine lasts idle more than 5 min, it would automatically shut off the supply. 10 - Haier HWM58-020 | User Manual - Page 13
on. Refer to the "Button of "PROGRAM/RESERVATION " paragraph on page 10. Page 10 Example: Use the "Quick" program for slightly soiled articles. When "standard" program is selected, the washing machine will perform full-automatically controlled fuzzy program to set water level, water flow and - Haier HWM58-020 | User Manual - Page 14
't spin to 2 GENTLE avoid wrinkles Wash (bb) Rinse(cc) Spin(dd) 3 QUICK WASH For load below 1 kg Wash (bb) Rinse(cc) Spin(dd) 4 WASH Repeat using the washing Wash (bb) liquid When the laundries need only 5 SPIN spinning after manual Spin(dd) washing (first drain then spin) If you - Haier HWM58-020 | User Manual - Page 15
"start/pause" button Close the top lid START PAUSE START PAUSE Except water filling ,washing, rinsing and draining, if the top cover is opened, the washing machine will stop running and alarm. Finish washing The washing machine cuts off the power supply automatically when wash cycle ends. 13 - Haier HWM58-020 | User Manual - Page 16
using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. When washing, lint filter must be used After using, please clean it in time. Lint filter - Haier HWM58-020 | User Manual - Page 17
-sale service department E2", buzzing Safety switch actuates, not spin, (af ter self-correcti on twice), nixi e tube displ ays "E3", buzzing No or slow water filling not reaching the level in 15min , nixie tube indicates "E4", buzzing Poor or no waterfall flow The machine does not act Not wash - Haier HWM58-020 | User Manual - Page 18
- Haier HWM58-020 | User Manual - Page 19
- Haier HWM58-020 | User Manual - Page 20
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
Fully
Automatic Washing Machine
User's manual
This manual is for
Please read this manual
carefully before using.
Retain it for future reference.
HWM58-020