Haier HWM70-A User Manual
Haier HWM70-A Manual
 |
View all Haier HWM70-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier HWM70-A manual content summary:
- Haier HWM70-A | User Manual - Page 1
User's Manual HWM70-A Fuzzy Computeried Automatic Washing Machine Contents Please read this manual carefully before washing 7 Put in the laundries 8 Add the detergent and softener 9 Use the operation buttons 10 Close the top lid 14 Finish washing 14 Disposal after washing 15 Trouble - Haier HWM70-A | User Manual - Page 2
the parts Before using symbols Bottom plate (1 piece) The end connecting to the washing machine Jointer connecting Water inlet hose the water inlet hose (2 safety of the users. Failure to comply with the instruction could cause damage of the machine or injure the personal safety of the user. - Haier HWM70-A | User Manual - Page 3
shop or our agent, or the after-sale service department for the sake of avoiding any risk. Keep the prong of the power plug clean. If dust is found on the power plug, please wipe it off with dry cloth. In case the washing machine is installed on ground with carpet, be careful - Haier HWM70-A | User Manual - Page 4
lint filter in good condition, and install it to proper position during washing. If the lint filter is lost or damaged, please contact the local after-sale service department of our company. To protect your laundries and washing machine, please take out all of the coins, buttons, sand, hairpin and - Haier HWM70-A | User Manual - Page 5
Before using Please install and adjust the machine according to the requirement of the manual, which is very important for you to operate the machine safely and properly. Install the bottom plate After opening the package, please lean the washing machine gently down on soft items (like towel - Haier HWM70-A | User Manual - Page 6
Figure 1 Outer drain hose Drain hose rack drain hose nut Figure 2 7.Install the bottom plate (method the same as stated above). Lift up the washing machine gently. Figure 5 Page 3 Usage of the drain hose The drain hose shall drain smoothly 1.The height of the drain hose shall be less than 10cm - Haier HWM70-A | User Manual - Page 7
6 Connection between the water inlet hose and the washing machine 1 Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged each time before using. If it happens so, please duly contact our after-sale service department. 2 Set the nut of the water inlet - Haier HWM70-A | User Manual - Page 8
water inlet hose 1 Close the water faucet. 2 Press the lock lever and push down the slider. Then pull off the water inlet hose. If the machine is used more than once every week, the water inlet hose jointer can remain on the faucet to avoid damaging the fastening screws. Lock level - Haier HWM70-A | User Manual - Page 9
the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil. e. For the laundries that may get lint ball and those with long fur, turn it over before putting in. f. Do not put the laundries polluted by chemicals into the washing machine directly - Haier HWM70-A | User Manual - Page 10
to the largest weight of the standard laundries under dry condition that can be washed or spinned in one cycle. Washing quantity for one cycle shall be less than the rated capacity.The largest capacity of this machine is 7.0kg. The thickness, size and type of the cloth will influence the actual - Haier HWM70-A | User Manual - Page 11
not touch the laundries directly. Refer to the user's manual for the usage and dosage of the whitener. As to whitener in powder, please dissolve it before using. Not applicable for fuzzy program and reserve washing Directly dissolved in the machine: 1.Fill in small quantity of water. 2.Add the - Haier HWM70-A | User Manual - Page 12
will be set to one out of 4, 6, 8, and 10. If there's water inside the tub, the machine cannot detect the cloth and will display water level 6 If is on. It will perform normal washing. WATER INLET WATER LEVEL CURRENT CURRENT button When the washing machine starts running, it will set the - Haier HWM70-A | User Manual - Page 13
available for your option Standard Common washing Night Low noise washing during night Gentle Washing the woolen textiles or underwear FAST 10-minute quick washing of laundries with light soil Remarks: Push the On/Off button to switch on the power. If the washing machine is idle for 5 minutes, it - Haier HWM70-A | User Manual - Page 14
FUZZY STANDARD NIGHT GENTLE FAST 3 Push the select button to select suitable procedure. SELECT After switching on the power, the washing machine will set to WASH-SPIN procedure automatically. It is the common procedure. To select other procedures, push the SELECT button to select one or more - Haier HWM70-A | User Manual - Page 15
WATER INLET button to make selection. See to WATER INLET in Page 10 for details. Page 10 WATER 5 Push the WATER LEVEL button to select suitable water level LEVEL After the power is switched on, the washing machine will execute fuzzy program automatically to detect the cloth. After defection, it - Haier HWM70-A | User Manual - Page 16
machine can set the current automatically according to the laundries. If you need to select current by yourself, please push the CURRENT button. Refer to CURRENT in Page 10 for details. Page 10 7 Push the RESERVE button to select suitable reserve wash program RESERVE After the power is switched - Haier HWM70-A | User Manual - Page 17
1.Pull it up to dismount. 2.Push it down to install it. 3.After washing, clean the filter screen Dismount Install The filter screen is likely to be blocked dismount the water inlet hose). 2.Do not store water in the washing machine for a long period. Drain the water completely after each using. - Haier HWM70-A | User Manual - Page 18
Trouble- breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. the top lid. Reorder the laundries. Close the top lid. Set the washing machine horizontally and then open and close the top lid once. Open the water - Haier HWM70-A | User Manual - Page 19
Packing list Name User's manual Lint filter Water inlet hose component Quantity 1 piece 1 piece 2 pieces Bottom plate 1 piece Tapping screw Fuzzy logic automatic washing machine 8 pieces 1 set Storage position Inside the document bag Inside the document bag Inside the accessory bag Between - Haier HWM70-A | User Manual - Page 20
level/Water quantity (about) Max water consumption Water inlet pressure Rated washing power Rated spinning power Weight Dimensions (mm) HWM70-A 220V ~ 60Hz 7.0kg 1/23L, 2/30L, 3/34L, 4/40L, 5/44L, 6/49L, 7/53L, 8/57L, 9/61L, 10/66L About 186L (the highest water level, standard program) 0.03MPa
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
User's Manual
Specifications
the back cover
HWM70-A
Picking list
Fuzzy Computeried Automatic
Washing Machine
Contents
Before using
Using process
Trouble shooting *
Answers to questions
16
Please read this manual carefully before using.
Retain it for future reference
Please check if the power receptacle has goodearthing
condition before using to guarantee your safety.
The manufacturer will not bear the responsibility for
those risks occurred from not obeying this manual.
7
8
9
10
14
14
15
Preparation before washing
Put in the laundries
Add the detergent and softener
Use the operation buttons
Close the top lid
Finish washing
Disposal after washing
nd
Names of the parts
The 2
cover
Safety precautions
Installation and adjustment
Install the water inlet hose
5
1
3
17