Haier HWM75-276S User Manual
Haier HWM75-276S Manual
 |
View all Haier HWM75-276S manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier HWM75-276S manual content summary:
- Haier HWM75-276S | User Manual - Page 1
User's manual Twin-tub Washing Machine with Pump This manual is for HWM75-276S Please read this manual carefully before using. Retain it for future reference. 0030806004E - Haier HWM75-276S | User Manual - Page 2
Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-Shooting *Answer to question Packing list *Specification - Haier HWM75-276S | User Manual - Page 3
Names of the parts Buzzer Water-filling entrance Water inlet selector handle Wash selector Wash timer Control panel Overflow filter Water level adjusting lever Lint filter Installed by user) Valve cover Pulsator Wash tub Drain hose Wash tub cover Base frame Outer cover of the spin tub Inner cover - Haier HWM75-276S | User Manual - Page 4
. If the power cord is bad, to avoid risk it is required to replace it by the technicians ofour special shop or the after-sale service department. Keep the pin of the power plug clean. Do not put the machine at damp place like the bathroom . Never wash it with water - Haier HWM75-276S | User Manual - Page 5
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing - Haier HWM75-276S | User Manual - Page 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose The drainage shall be smooth with the drain - Haier HWM75-276S | User Manual - Page 7
How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Extend the drain hose from the side of spin tub. Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the - Haier HWM75-276S | User Manual - Page 8
Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put the drain hose up to suitable - Haier HWM75-276S | User Manual - Page 9
to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. 7 - Haier HWM75-276S | User Manual - Page 10
handle (standard current, gentle current) Wash timer (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). Water-filling entrance Overfilling sign Buzzer Spin timer (The buzzer will ring when the washing finishes) (to set to below - Haier HWM75-276S | User Manual - Page 11
Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper The laundries Proper No gland are slanting (2) Close the inner and outer cover of - Haier HWM75-276S | User Manual - Page 12
Rinsing Rinse with water-filing 1.Put the laundries into the wash tub. Select suitable current according to the laundries. OVERFLOW 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. If you - Haier HWM75-276S | User Manual - Page 13
Spinning 1. Put the laundries into the spin tub evenly and smoothly. Selection of the spin time 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's - Haier HWM75-276S | User Manual - Page 14
Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must - Haier HWM75-276S | User Manual - Page 15
Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). Water level adjusting lever Corrugation Pipe 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap - Haier HWM75-276S | User Manual - Page 16
Trouble-shooting Answer to question When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, - Haier HWM75-276S | User Manual - Page 17
Trouble-shooting Answer to question (If there's breakdown, please pull off the power to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason The machine does not - Haier HWM75-276S | User Manual - Page 18
Packing list Name User's manual Water inlet hose Lint filter Gland Quantity One piece One piece One piece One piece Twin-tub washing machine One set Specification Water level/Water
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
Twin-tub Washing Machine with Pump
User's
manual
This manual is for
HWM75-276S
Please read this manual
carefully before using.
Retain it for future reference.
0030806004E