Haier PBFS21EDAS User Manual - Page 16

About Refrigerator compartment - features

Page 16 highlights

About Refrigerator compartment Temporary storage or frequent foods should be kept in the refrigerator compartment. Although in most areas inside the refrigerator compartment, an average temperature of 36ºF- 48ºF can be obtained through adjusting the temperature settings, this compartment is not intended for long-term fresh keeping. So, keep in mind refrigerator compartment is only for temporary storage. Height-adjustable shelves You can adjust the height of shelves which are supported by removable support arms. Remove the shelf to adjust first-remove the shelf by lifting it up and pull out. Replace it by inserting its hook end into the retaining holes, then replace the shelf. NOTE Make sure the shelves are placed evenly, fail to do so may cause the selves or food falling out. Crisper The crisper features humidity adjustment function, which will meet your specific need for food storing. „ Dial up the humidity knob located on the right side of the crisper to maintain a higher humidity. Suitable for storing cucumbers, grapes, kiwi fruits and persimmon etc. „ Dial down the humidity knob to maintain a lower humidity. Suitable for storing strawberry, orange, green bean, garlic stem, watermelon, plum and tomato etc. „ When removing the crisper, make sure the front edge of its cover board is within the crisper, then, you can pull the crisper out. Remove the cover board only when the crisper is already removed. Also, replace the cover board before replacing the crisper. Cooked food drawer Your refrigerator is equipped with cooked food drawer, when removing it: „ Take out the cover board; „ Remove the drawer. High bottle bin adjustment and its cleaning Lift the bottle bin as shown in direction (1), hold both side and pull it out in direction (2). After cleaning, replace the bottle bin to original position or change to other positions as you need. Removal of crisper cover board Lift the crisper cover board as shown in direction (1), pull it out in direction (2). While adjusting bottle bin height, do not install dairy bin, gallon bin and other bins to the lower part of the door, in case they may bump the drawers and leave it difficult to close the door tightly. NOTE - 15 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

About Refrigerator compartment
- 15 -
Temporary storage or frequent foods should be kept in
the refrigerator compartment.
Although in most areas inside the refrigerator compartment, an
average temperature of 36ºF- 48ºF can be obtained through adjusting
the temperature settings, this compartment is not intended for
long-term fresh keeping. So, keep in mind refrigerator compartment is
only for temporary storage.
Height-adjustable shelves
You can adjust the height of shelves which are supported by
removable support arms.
Remove the shelf to adjust first—remove the shelf by lifting it up and
pull out. Replace it by inserting its hook end into the retaining holes,
then replace the shelf.
NOTE
Make sure the shelves are placed evenly, fail to do so may
cause the selves or food falling out.
Crisper
The crisper features humidity adjustment function, which will meet your
specific need for food storing.
Dial up the humidity knob located on the right side of the crisper
to maintain a higher humidity. Suitable for storing cucumbers,
grapes, kiwi fruits and persimmon etc.
Dial down the humidity knob to maintain a lower humidity.
Suitable for storing strawberry, orange, green bean, garlic stem,
watermelon, plum and tomato etc.
When removing the crisper, make sure the front edge of its
cover board is within the crisper, then, you can pull the crisper
out. Remove the cover board only when the crisper is already
removed. Also, replace the cover board before replacing the
crisper.
Cooked food drawer
Your refrigerator is equipped with cooked food drawer, when removing
it:
Take out the cover board;
Remove the drawer.
High bottle bin adjustment and its cleaning
Lift the bottle bin as shown in direction (1), hold both side and pull it
out in direction (2).
After cleaning, replace the bottle bin to original position or change to
other positions as you need.
Removal of crisper cover board
Lift the crisper cover board as shown in direction (1), pull it out in
direction (2).
NOTE
While adjusting bottle bin height, do not install dairy bin, gallon bin and other bins to the lower part of
the door, in case they may bump the drawers and leave it difficult to close the door tightly.