Haier PBFS21EDAS User Manual - Page 19

Precaution when Freezing Food Allow food to cool down to ambient temperature before adding to the refrigerator. Divide food into smaller packages, this will make it easier to be frozen completely, and better after-thaw quality. For each package, 2.5kg at most is recommended. Wrap food before adding to the refrigerator, and to prevent food packages from sticking into each other, make sure the wrapper surface is clean and dry. To prevent odor transfer and quality decline of food, pick materials free of odor, poison and stain, which can provide good air, water sealant at the same time as wrapper of food. Take down the expiration date of food stored on the surface of its wrapper. Generally, never add food which had been thawed from frozen status back into the freezer, unless they've been cooked. Otherwise the quality of food will not be good. So, take care to thaw only you'll cook at once each time. Do not add too much food to the freezer at one time. Please refer to the freezing capacity listed in the 'Specification' section. Usage of Ice Maker, Cold Water Dispenser Preparation „ Prepare the pipe in proper length, and make sure the piping line does not have too many turns. Usually, the piping should be shorter than 5 meters, or otherwise the pressure loss will reduce production capacity of ice cubes, and flow rate of water dispenser. „ Piping line is not high temperature resistant, keep it away from heat sources. „ Piping line should be installed by professionals. „ At first start-up, you need to press down the cold water button many times (no more than one minute at one time) till the dispenser starts to provide cold water. „ Instructions on piping work of water supply line The ice maker requires a water supply pressure of 21-123 psi. „ The water filter only provide filtration of foreign matters, it is not intended for anti-bacteria purpose, so, please make sure to connect to portable water supply. Precautions: „ Do not install the water piping of ice maker in a position where the temperature may get under 32ºF, as it may be frozen. „ Flush water through the piping until water is clear. Check leakage around connectors. „ The ice maker will produce ice cubes only after its temperature is no higher than 5ºF (At first start-up, discard first several batches of ice made, to remove possible foreign matters remained within the water piping.). „ When the refrigerator is installed, make sure to keep piping at proper places to avoid damage. „ The water filter is designed to remove foreign matters from water supplied to the refrigerator. To guarantee clean ice production, it absorbs foreign matters from the water. After a certain period of usage, you may find out the ice cubes produced are getting less and smaller in size. This indicates that the water filter may be blocked. After half year's operation, the refrigerator will automatically turn on the water filter alert, please replace the water filter with a new one. Contact your local Haier after service center or the dealer from whom you purchased your refrigerator for information on water filter replacement. After the replacement is made, press the water alert reset key. During new installation, service personnel will be responsible for the installation of the water filter. After that, you need to carry out the replacement yourself. „ Installation of ice maker should be carried out by certified organizations. „ Your refrigerator requires connection to portable water supply only. - 18 -