Home » Haier Manuals » Laundry Washers » Haier XPB60-CS » Manual Viewer

Haier XPB60-CS User Manual

Haier XPB60-CS Manual

View all Haier XPB60-CS manuals

Add to My Manuals
Save this manual to your list of manuals

Haier XPB60-CS manual content summary:

Haier XPB60-CS | User Manual - Page 1
Twin-tub Washing Machine User's manual This manual is for XPB60-CS Please read this manual carefully before using. Retain it for future reference. The machine is for cold water connection only. 0030507957
Haier XPB60-CS | User Manual - Page 2
Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Midway spinning Rinsing Spinning Disposal after washing Trouble-Shooting Answer to questions Packing list 17 Specification The back
Haier XPB60-CS | User Manual - Page 3
Names of the parts Water-filling entrance Water inlet selector handle Wash selector Wash timer Control panel Overflow filter Water level adjusting lever Quick water-filling entrance Lint filter (Installed by user) Pulsator Wash tub Wash tub cover Buzzer Outer cover of the spin tub Inner cover of
Haier XPB60-CS | User Manual - Page 4
of an after-sale service department. Keep the pin of the power plug clean. Do not put the machine at damp place like the bathroom . Never wash it with water. Do not place wet laundries on the control panel. Do not use water hotter than 50 C . In case the washing machine is installed on ground
Haier XPB60-CS | User Manual - Page 5
(such as thinner, petrol etc.). Petrol Thinner Children without care should not use the machine. Keep the machine away from direct sunlight and heat source like the heater. To protect your laundries and washing machine, please take out all of the coins, buttons, sand, hairpin and other foreign
Haier XPB60-CS | User Manual - Page 6
according to the requirement of the manual. It is very important to your security and correct operating of the machine. Install the lint filter After opening the package,please take out the lint filter from the document bag,install it to the overflow filter of the wash tub.See the figure. Overflow
Haier XPB60-CS | User Manual - Page 7
the ex factory Back installation position of the drain hose. Soft item Extend the drain hose from the side of wash tub Front Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet.Take the hose
Haier XPB60-CS | User Manual - Page 8
that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and machine stand horizontally. Pay attention to the following before washing the laundries Check if the laundries has special washing instructions.
Haier XPB60-CS | User Manual - Page 9
user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. How to use the washing powder Direct dissolved in the machine of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. 7
Haier XPB60-CS | User Manual - Page 10
to 2 minute then turn it back. it can increase the service life of the timer). OFF WASH TIMER DRAIN OFF MAX WASH SELECTOR WATER INLET BUZZER SPIN TIMER Wash 1.Water-filling selector (1) Set the water-filling selector at the "WASH" side.(Figure 1) (2) Set the water level adjusting lever to
Haier XPB60-CS | User Manual - Page 11
rod at the "SPIN" side. Fill water for about 1 minute. If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling. (3) Close the outer cover of the spin tub. Spin for 1-2 minutes
Haier XPB60-CS | User Manual - Page 12
fill suitable water continuously. If you find water flowing out here,please twist the water tap to limit the water filling. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing. Rinse with stored water (Repeat the midway spinning and rinsing with stored water for 2-3 times) 1. Put the
Haier XPB60-CS | User Manual - Page 13
Blending thin laundries Within 1 minute During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries. In spinning, it will pause the work if you open the outer cover of the spin tub. Close it to
Haier XPB60-CS | User Manual - Page 14
machine. Please first pull out the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned after each wash filter , then push the upper part of the filter in ( marked with " up side "). (See Figure 3) Figure 3 12
Haier XPB60-CS | User Manual - Page 15
Disposal after washing Cleaning the overflow filter Too much lint on the overflow filter will influence the normal usage of the machine. Please clean it every two months. 1 Take off the overflow hook at the left upper side. (4).Push the upper part in as indicated in Figure 3. Hook Figure 3 13
Haier XPB60-CS | User Manual - Page 16
the complete unit Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Petrol Thinner Alcohol After washing, dismount the water inlet hose. Do not store water in the tub for long period. Discharge the water immediately after
Haier XPB60-CS | User Manual - Page 17
Trouble to reset it. Please check carefully. The laundries may fall to the lower part of the outer side of the spin tub (as Spin tub indicated in the to melt. When the water is frozen Pour hot water below 50 into the wash tub to soak it completely. Then turn the pulsator on gently. Please confirm
Haier XPB60-CS | User Manual - Page 18
breakdowns, please call the after-sale service department of our company. Do not repair it by yourself. Phenomena The machine does not act. The draining does not the outer side of the spin tub? There's abnormal sound during washing Are there hair pin, coins or metal items brought inside the tub?
Haier XPB60-CS | User Manual - Page 19
Packing list Name User's manual Warranty manual Water inlet hose Water-filling jointer Lint filter Quantity One piece One piece One piece One piece One piece Gland One piece 17
Haier XPB60-CS | User Manual - Page 20
Specification Maximum/43L Medium/36L Water level/Water quantity (about) Minimum/30L Injection pressure(MPa) 0.02-0.2 Rated washing / spinning capacity(kg) 6.0/5.0 (weight of standard dry cloth)