Haier XPM20-A User Manual
Haier XPM20-A Manual
 |
View all Haier XPM20-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier XPM20-A manual content summary:
- Haier XPM20-A | User Manual - Page 1
Mini Washing Machine User's manual This manual is for HWM20-A Please read this manual carefully before using. Retain it for future reference. 0030805835A - Haier XPM20-A | User Manual - Page 2
Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Select the wash time Finish washing Disposal after washing Trouble-shooting Packing list *Specification - Haier XPM20-A | User Manual - Page 3
Names of the parts Timer knob Water inlet Lint filter(Installed by user) Panel support Pulsator Cabinet Base frame Fixing leg (four pieces) Control panel Filter cap Top lid Drain hose Meaning and description of the symbols Warning sign Forbidding - Haier XPM20-A | User Manual - Page 4
to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean. Do not put the machine Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, - Haier XPM20-A | User Manual - Page 5
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing - Haier XPM20-A | User Manual - Page 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose When washing, the drain hose must be hung - Haier XPM20-A | User Manual - Page 7
Adjust the installation position The largest permitted slope of the bearing surface of the washing machine is 2 . Slanting or uneven ground will cause unstable operation of the machine. Please check with following methods: Hang a becket with weight to confirm if the washing machine is horizontal. - Haier XPM20-A | User Manual - Page 8
water absorbing, please put them into water with hands. d.For laundries with much soil, lease remove the soil first. You can add detergent on the part with serious soil directly. It is much easier to remove the soil by that mean. e.For laundries likely to get lint ball or with long - Haier XPM20-A | User Manual - Page 9
whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. Select the service life of the timer). 7 - Haier XPM20-A | User Manual - Page 10
Install the lint filter After cleaning, insert the bottom of the lint filter (marked with "down side") into the filter frame, then push the upper part of the filter in (marked with "up side"). (See to Figure 3) Figure 2 Attention: be sure not to confuse the direction. Figure 1 Figure 3 Wipe the - Haier XPM20-A | User Manual - Page 11
Trouble-shooting The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. Phenomena The washing machine does not act There's abnormal - Haier XPM20-A | User Manual - Page 12
Packing list Name User's manual Water inlet hose Lint filter Mini washing machine Quantity One piece One piece One piece One set Specification Water level/Water quantity (about) Injection pressure(MPa) 1/7L 2/12L 3/18L 0.02 0.2 10
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Mini
Washing Machine
User's
manual
This manual is for
HWM20-A
Please read this manual
carefully before using.
Retain it for future reference.
0030805835A