Haier XQB50-10A User Manual

Haier XQB50-10A Manual

Get Haier XQB50-10A PDF manuals and user guides View all Haier XQB50-10A manuals
Add to My Manuals
Save this manual to your list of manuals

Haier XQB50-10A manual content summary:

  • Haier XQB50-10A | User Manual - Page 1
    Automatic Washing Machine User's manual This manual is for XQB50-10A Please read this manual carefully before using. Retain it for future reference.
  • Haier XQB50-10A | User Manual - Page 2
    the water inlet hose............5 Using process Preparation before washing 6 Put in the laundries 7 Put in the detergent 8 Use the operation buttons 9 Close the top lid 13 Finish washing 14 Disposal after washing 14 Trouble shooting Answer to questions....15 Packing list 16 Specifications
  • Haier XQB50-10A | User Manual - Page 3
    plate (one) water inlet hose (one) Drain hose Drain hose support tapping screws ST4X16 (eight) Lint filter (two) Meaning and description the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user. Forbidden
  • Haier XQB50-10A | User Manual - Page 4
    with water. Do Not put wet laundries on the control panel. Do not use water hotter above 50 C . In case the washing machine is installed on ground with Do not wash water-proof laundries like the raincoat, carpet, do not block the ventilation hole with carpet. bike covers etc. to avoid abnormal
  • Haier XQB50-10A | User Manual - Page 5
    petrol etc.) Petrol Thinner The handicapped or children without care shall not use the machine. Keep the machine away from direct sunlight and heat source like the heater. To. prevent your laundries and washing machine from damage,be sure to take out all of the foreign materials from your pocket
  • Haier XQB50-10A | User Manual - Page 6
    of the manual. It is very important to your security and correct operating the machine. Install the lint filter 1.Press downward to assmble. 2.Pull upward to detach. Pull down Pull down Put up Put up Install the bottom plate After you open the package, please lean the washing machine gently
  • Haier XQB50-10A | User Manual - Page 7
    ground 2.Do not step on or press the drain hose. Notes: the highest point of drain pipe should be higher than the water level of washing tub for avoiding to siphon phenomenon during drain. The highest point 0.8m
  • Haier XQB50-10A | User Manual - Page 8
    Install the water inlet hose Install the water inlet hose Before using 1. Insert a new flat washer into each end of the inlet hoses. Firmly put the washers in the coupling. Note: Use the new hose sets supplied with the washer. Any other old hose sets should not be used. You may have to use pliers
  • Haier XQB50-10A | User Manual - Page 9
    inlet hose. 2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3. Hang up the drain hose. Pay attention to followings before washing the laundries Confirm if there's special
  • Haier XQB50-10A | User Manual - Page 10
    refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 5.0kg. The thickness, size, type of the cloth will influence the actual
  • Haier XQB50-10A | User Manual - Page 11
    . The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before use. How to use the washing powder Direct dissolved in the machine 1.Fill water to "Low" water level. 2.Add the power. Run for
  • Haier XQB50-10A | User Manual - Page 12
    abnormal conditions (see page 15) Page 15 PROGRAM STATUS STANDARD HEAVY GENTLE QUICK WASH WASH SPIN PROCEDURE STATUS SOAK WASH RINSE SPIN WATER LEVEL PROGRAM RESERVATION " WATER LEVEL"button The user selects a suitable water level depending on the load. "PROGRAM/RESERVATION " button Press
  • Haier XQB50-10A | User Manual - Page 13
    working, push it to pause working. During pause, push this button to restart and continue operation. XQB50-10A START PAUSE POWER ON/OFF Remarks: After pressing "Power On/Off" to connect power supply, if the washing machine lasts idle more than 10 min, it would automatically shut off the supply.
  • Haier XQB50-10A | User Manual - Page 14
    STATUS STANDARD HEAVY GENTLE QUICK WASH WASH SPIN PROCEDURE STATUS SOAK WASH RINSE SPIN WATER LEVEL PROGRAM RESERVATION XQB50-10A START PAUSE POWER ON/ " or "Jeans" program is selected, the washing machine will perform full-automatically controlled fuzzy program to set water level, water flow
  • Haier XQB50-10A | User Manual - Page 15
    the laundries is lightly soiled that needs to be washed quickly. Wash(bb) Rinse(cc) About 10 Spin(dd) 4 WASH When the common laundries need only washing Wash(bb) About 13~18 When the laundries need 5 SPIN only spinning after manual washing (first drain then spin) Spin(dd) About 9 If
  • Haier XQB50-10A | User Manual - Page 16
    firstly soak for about 25~45 min after water filling and then begins to wash. When "Quick wash" program is chosen, the washing machine would automatically set water level and full processes of wash, rinse and spin. 3 Press the "water level" button to select suitable water level WATER LEVEL After
  • Haier XQB50-10A | User Manual - Page 17
    , close the water faucet. ( If needed, you can dismantle the water inlet hose). 2.Do not store water in the washing machine for a long period. Drain the water completely after each using. 3.Be sure to pull off the power plug before maintenance. 4.Hang up the power cord
  • Haier XQB50-10A | User Manual - Page 18
    Trouble shooting Answer to question (If there's breakdown, please pull off plug loose? Is the top lid closed? Are the laundries put orderly? Is the machine slanting? Is there metal material inside the washing machine? Are the laundries slanting in spinning? Is the power plug loose? If the water
  • Haier XQB50-10A | User Manual - Page 19
    water filling 48 s after sensor tests cloth material. Packing list Name User's manual Components of the water inlet hose Bottom plate Drain hose Drain hose support Tapping screws ST4x16 Lint filter Automatic washing machine Quantity One One One One One Eight Two One Storage position Inside the
  • Haier XQB50-10A | User Manual - Page 20
    Specification Model XQB50-10A Rated washing / spinning capacity 5.0kg Water level/Water quantity (about) Lowest/20L Low/30L Mid/37L High/48L Max water consumption About 144L (High water level; Standard program) Water inlet pressure 0.03MPa-0.78MPa Rated washing power 325W Rated spinning
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Automatic Washing
Machine
XQB50-10A
User's
manual
This manual is for
Please read this manual
carefully before using.
Retain it for future reference.