Haier XQS70-98 User Manual

Haier XQS70-98 Manual

Get Haier XQS70-98 PDF manuals and user guides View all Haier XQS70-98 manuals
Add to My Manuals
Save this manual to your list of manuals

Haier XQS70-98 manual content summary:

  • Haier XQS70-98 | User Manual - Page 1
    Double-drive Automatic Washing Machine User's manual This manual is for XQS70-98 Please read this manual carefully before using. Retain it for future reference.
  • Haier XQS70-98 | User Manual - Page 2
    8 Put in the laundries 9 Use of the detergent 9 Use the operation buttons 10 Close the top lid 14 Finish washing 14 Disposal after washing 15 Trouble shooting answer to question 16 Packing list Specification 17
  • Haier XQS70-98 | User Manual - Page 3
    being sketch map and with the improvement of our products, the machine you buy is like to be different from the figure indicated in the manual .Please understand. Meaning and description of the symbols Warning sign Contents marked with that symbol are related to the safety of the product and the
  • Haier XQS70-98 | User Manual - Page 4
    power plug is bad, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department. In case the washing machine is installed on ground with carpet, do not block the ventilation hole with carpet. The ventilation holes at the
  • Haier XQS70-98 | User Manual - Page 5
    (such as thinner, petrol etc.). Benzene The appliance is not instruct for use of young children of infirm persons without supervision.Young children lint filter is lost or damaged, please contact the local after-sales service department of our company. Dismantle The cover of lint filter lint
  • Haier XQS70-98 | User Manual - Page 6
    Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover components 1.Open the top lid of the washing machine. 2.
  • Haier XQS70-98 | User Manual - Page 7
    How to change the direction of the drain hose 1.Lean the machine downgently with the front surface facing the ground. Loosen the eight screws by a crossscrewdriver. 3.Extend the drain hose from the right side. Push the drain hose into the groove with hands. Back Bottom plate Front Soft item 2.
  • Haier XQS70-98 | User Manual - Page 8
    Install the water inlet hose Confirm the water faucet water faucet, suitable The exit end face of the faucet water faucet, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage.
  • Haier XQS70-98 | User Manual - Page 9
    Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
  • Haier XQS70-98 | User Manual - Page 10
    1 Preparation before washing Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline. 3.Put
  • Haier XQS70-98 | User Manual - Page 11
    on laundries with colour or pattern as they are prone to lose colour. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before use. Direct dissolved in the machine(not applicable for
  • Haier XQS70-98 | User Manual - Page 12
    4 Use the operation buttons Description of the function of the buttons Mode and meaning of the VFD indicator Flashing indicating the running program On indicating the program about to run or the selection mode Digital tube During sensing, it displays During operation of programs, it displays the
  • Haier XQS70-98 | User Manual - Page 13
    Child lock function This function is used to protect the children and prevent them from changing the washing procedure. Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF button. The digitron displays CL . You can continue setting desired washing procedures. After
  • Haier XQS70-98 | User Manual - Page 14
    Steps of using the operation buttons and description of the steps Minutes Minutes Times Minutes SOAK WASH RINSE SPIN 9 10 7 8 Time remained(minutes) 5 6 3 4 1 2 Reserve(hours later) FIBRE COTTON WOOLLEN SILK NORMAL QUICK POSTHASTE JEANS WATER LEVEL RESERVE PROGRAM START
  • Haier XQS70-98 | User Manual - Page 15
    After switching on the power, the washing machine will set to common program including"wash, rinse, spin "automatically. To select other procedures, push the " SOAK"," WASH", " RINSE" or "SPIN" button to select the time of soak,wash and spin, and the times of rinse. After switching on the power, if
  • Haier XQS70-98 | User Manual - Page 16
    * Total time: including the normal water inlet time and drain time. The total washing time may be influenced by the water inlet pressure and water level. * Spin time: From the moment the intermittent spinning starts to the moment it stops running (the time displayed on spin digitron is from
  • Haier XQS70-98 | User Manual - Page 17
    7.Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on the control panel
  • Haier XQS70-98 | User Manual - Page 18
    Trouble-shooting Answer to question (If there's breakdown, please pull off the top lid once. The digitron displays E6. The water level sensor is bad. Please contact the after-sales service department. The digitron displays E8. The digitron displays E9. The machine does not act Not wash Not
  • Haier XQS70-98 | User Manual - Page 19
    Packing list Name User's manual Inner cover components Component of the water inlet hose The end connecting to the washing machine Jointer connecting the water inlet hose and the water
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
Please read this manual carefully
before using.
Retain it for future reference.
Double-drive Automatic Washing Machine
This manual is for
XQS70-98
User's
manual