Hamilton Beach 35030 Use & Care - Page 4

840150301 ENv04.qxd 3/11/08 3:12 PM Page 4 How to Assemble the Fryer 1. Place base on a stable, flat surface. 2. Insert oil pot into base. 3. Align grooves of Heating Element Assembly with grooves on base. Push down on Heating Element Assembly to connect it to base. NOTE: Heater cannot be switched on unless correctly installed on base. 4. To assemble handle, squeeze tines of handle together. 5. Align tines with round holes on metal bracket of basket. 6. Release tines to allow them to spread and lock into metal bracket. For storage: squeeze tines together and then rotate handle into basket. 7. Align grease screen and vent of lid toward Heating Element Assembly. 8. Make sure that grease screen is in vent. Lid snaps into place. How the Timer Works 1. The timer counts down. It can be set for any time between 1 to 99 minutes. 2. To set timer, press timer button until display shows "00." Continue pressing button to advance timer by one minute per press. To advance timer faster, press and hold button down. 3. Timer will start counting down selected time shortly after you stop pressing button. During countdown time, display will flash. 4. Timer can be reset to zero or be turned off while it counts down. Press button to reset LCD display until it shows "00." 5. Timer will beep when it reaches zero and will beep again after approximately 30 seconds. Timer will turn off automatically. NOTE: Timer DOES NOT turn off fryer. 4