Harman Kardon AVR 154 Owners Manual

Harman Kardon AVR 154 Manual

Harman Kardon AVR 154 manual content summary:

  • Harman Kardon AVR 154 | Owners Manual - Page 1
    AVR 154 AUDIO/VIDEO RECEIVER OWNER'S MANUAL
  • Harman Kardon AVR 154 | Owners Manual - Page 2
    near water. 6. The A/V receiver's cabinet may be cleaned by gently wiping with a soft cotton or microfiber cloth. Do not use water or any liquid cleaners. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat
  • Harman Kardon AVR 154 | Owners Manual - Page 3
    be replaced immediately by an authorized service center with a cord meeting factory specifications. to the weight of the AVR 154 and the heat generated by the amplifiers, there is the remote possibility that to a variety of factors beyond Harman Kardon's control, including the nature of the finish
  • Harman Kardon AVR 154 | Owners Manual - Page 4
    STAPLE INVOICE HERE 4
  • Harman Kardon AVR 154 | Owners Manual - Page 5
    37 AUX Input 38 Selecting a Surround Mode 39 ADVANCED FUNCTIONS 39 Audio Processing and Surround Sound 39 Analog Audio Signals 39 Digital Audio Signals 40 Surround Modes 40 Dolby Surround Settings 41 Default Modes 41 System Settings 44 Dim Function 44 Advanced Remote Control
  • Harman Kardon AVR 154 | Owners Manual - Page 6
    or its operation, please contact your retailer or customer installer, or visit our Web site at www.harmankardon.com. Harman Kardon® AVR 154 5.1-Channel Audio/Video Receiver Audio Section Surround Modes • 30 Watts x 5, five channels driven at full power at 8 ohms, 20Hz - 20kHz,
  • Harman Kardon AVR 154 | Owners Manual - Page 7
    • Color-coded connections • Programmable 11-device main remote control • Source input renaming • A/V sync delay up to 100ms Supplied Accessories The following accessory items are supplied with the AVR 154. If any of these items are missing, please contact Harman Kardon customer service at www
  • Harman Kardon AVR 154 | Owners Manual - Page 8
    the Initial Setup section), and the size (frequency range) of each speaker. When a digital audio input is used, letters will light inside the boxes to indicate which channels are present in the incoming signal. Remote IR Sensor: This sensor receives infrared (IR) commands from the remote control. It
  • Harman Kardon AVR 154 | Owners Manual - Page 9
    Select Tuning Mode Digital Audio Inputs (Optical 3 and Coaxial 3) Video 3 Analog Audio Video 3 Inputs Video Inputs NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support section
  • Harman Kardon AVR 154 | Owners Manual - Page 10
    the HDMI audio function of your video display, and make a separate digital audio connection from the source device to one of the AVR's coaxial or optical digital audio inputs to benefit from the AVR 154's multichannel audio processing. NOTE: The AVR 154 does not convert other types of video to HDMI
  • Harman Kardon AVR 154 | Owners Manual - Page 11
    Video 1 A/V Inputs Video Monitor Outputs Video 1 A/V Outputs DVD A/V Inputs HDMI Inputs (1, 2 and 3) HDMI AUX Monitor Output Input Component Video Inputs (1 and 2) Component Video Monitor Outputs AC Power Cord CD Inputs Subwoofer Output Front Speaker Outputs Coaxial Digital Audio
  • Harman Kardon AVR 154 | Owners Manual - Page 12
    the audio source. If a signal is present at the component video inputs assigned to this source, it will be used. If not, the receiver will use the video input and remote control codes for the last-selected analog video source. Test Tone: Press this button to activate the test tone for manual output
  • Harman Kardon AVR 154 | Owners Manual - Page 13
    Sleep DSP Surround On-Screen Display Channel Level Digital Input Tuning Mode Direct Station Entry Tuning Tone Mode Night Mode Track Skip Transport Controls 13 Mute Power Off Input Selectors 6-Channel Input Selector Volume Controls TV/Video Speaker Setup Navigation OK Delay Numeric Keys Memory Clear
  • Harman Kardon AVR 154 | Owners Manual - Page 14
    REMOTE CONTROL FUNCTIONS Tuning Mode: This button toggles between manual (one frequency step at a time) and automatic (seeks frequencies with acceptable signal strength) tuning mode. It also toggles between stereo and mono modes when an FM station is tuned. Memory: After you have tuned a particular
  • Harman Kardon AVR 154 | Owners Manual - Page 15
    by using a generic name: • Dolby Laboratories, Inc., Modes - Dolby Digital, Dolby Pro Logic II, Dolby Virtual Speaker, Dolby Headphone • DTS Modes - DTS, DTS Neo:6, DTS 96/24 • Harman International (Harman Kardon's Parent Company) - Logic 7 • DSP Modes - Generic modes that include Hall 1, Hall 2 and
  • Harman Kardon AVR 154 | Owners Manual - Page 16
    -coding standard. See Table 1. Table 1 - Connection Color Guide Audio Connections Front (FL/FR) Center (C) Surround (SL/SR) Subwoofer (SUB) Digital Audio Connections Coaxial Optical Video Connections Component Y Composite S-Video HDMI™ Connections (switching only) HDMI Left Right Input
  • Harman Kardon AVR 154 | Owners Manual - Page 17
    the HDMI connections for video only. Make a separate audio connection from the source device to the AVR 154, and consult the owner's manual for the source device for instructions on muting the device's HDMI audio output. Digital Audio Coaxial digital audio jacks are usually color-coded in orange
  • Harman Kardon AVR 154 | Owners Manual - Page 18
    a DVI input, you may use an HDMI-to-DVI adapter (not included) to connect it to the AVR's HDMI Output, but the HDMI-to-DVI connection will not carry audio. In addition, your DVI-equipped display should be HDCP (HighDefinition Copy Protection)-compliant. Figure 9 - HDMI Connection Analog Video There
  • Harman Kardon AVR 154 | Owners Manual - Page 19
    spot. NOTE: Your receiver will sound its best when the same model loudspeaker is used for all positions (other than the subwoofer). If that isn't possible, try to use speakers made by the same manufacturer. Front Left Speaker Video Display Center 30° 30° Subwoofer Front Right Speaker 110° 150
  • Harman Kardon AVR 154 | Owners Manual - Page 20
    offer audio, while sources used for watching movies or broadcast-television programming deliver a video signal as well. Referring to the photograph of the AVR 154 remote control on page 13, there is a section of 12 buttons near the top of the remote designated "Input Selectors": DVD, AM/FM, CD, AUX
  • Harman Kardon AVR 154 | Owners Manual - Page 21
    the corresponding Input Selector on the remote, e.g., DVD, with the device's product code. To enjoy audio from the 6-Channel Analog Audio Inputs, first select the source for the video input (DVD, in this example), and then switch the source to the 6-Channel Analog Audio Inputs. The AVR 154 will use
  • Harman Kardon AVR 154 | Owners Manual - Page 22
    AVR remote to operate the player. • Connect a Harman Kardon DMC 1000 digital media center to any available HDMI Input for digital video and any available input for digital audio, or to the Video 1 Audio/Video Inputs for analog audio and video. You may make both the analog and digital audio and video
  • Harman Kardon AVR 154 | Owners Manual - Page 23
    INSTALLATION • Connect the recorder's optical digital audio output to the Optical 2 Input on the AVR (if available). • Then go to "Composite/S-Video" below to make recordings, as the AVR 154 cannot make recordings from copy-protected component video sources or digital audio (except 2-channel)
  • Harman Kardon AVR 154 | Owners Manual - Page 24
    AUX Input on the AVR. Use the device's own controls to operate it. See Figure 31. AVR 154 AVR 154 Figure 29 - Connecting a CD Player NOTE: A turntable may only be connected to the AVR if it is equipped with an internal phono preamp, or if you supply an external phono preamp, available at some audio
  • Harman Kardon AVR 154 | Owners Manual - Page 25
    INSTALLATION AVR 154 AVR 154 Figure 32 - Connecting a Device to the Front-Panel Inputs Audio Components: Connect audio-only devices, such as CD players, to either the Coaxial 3 or Optical 3 Digital Audio Inputs, or the Video 3 Analog Audio Inputs (see Figure 32). If you obtain your broadcast
  • Harman Kardon AVR 154 | Owners Manual - Page 26
    into the remote. The AVR 154's remote is factory-programmed to control many Harman Kardon DVD and CD players. NOTE: The remote may be easily programmed to operate the DMC 1000 digital media center, using the Video 1 or any of the HDMI Input Selectors, by following the instructions below. Select
  • Harman Kardon AVR 154 | Owners Manual - Page 27
    to switch the remote's device mode. See pages 44 through 45 for instructions on these advanced programming functions. NOTE: The AVR 154 remote is preprogrammed to operate the transport controls of Harman Kardon DVD players when the AVR or the Video 2 (cable/satellite) or Video 3 (TV) source is
  • Harman Kardon AVR 154 | Owners Manual - Page 28
    source devices. You should be able to turn on the receiver and view a blue screen on your video display. If necessary, reread the Installation Section before continuing. Step One - Determine Speaker Size The AVR 154 can't detect how many speakers you've connected to it; nor can it determine their
  • Harman Kardon AVR 154 | Owners Manual - Page 29
    the receiver and video display turned on, press the OSD Button on the remote (see Figure 40). Use the ¤ Button on the remote to move the cursor to the MANUAL SETUP line, and press the OK Button to display the Manual Setup menu. See Figure 42. Figure 42 - Manual Setup Menu Screen The Manual Setup
  • Harman Kardon AVR 154 | Owners Manual - Page 30
    inside the boxes appear when a digital signal is being received with that channel discretely encoded. The letters flash when the signal is not present, such as when a DVD is paused. Figure 44 - Speaker/Channel Input Indicators Speaker Crossover Menu On the Manual Setup menu, move the cursor to the
  • Harman Kardon AVR 154 | Owners Manual - Page 31
    OK Button to return to the Manual Setup menu, or press the OSD Button to exit the menu system. You may adjust the delay settings without using the on-screen menu system. Select a surround mode that uses all of the speakers in your system. Press the Delay Button on the remote to display the A/V SYNC
  • Harman Kardon AVR 154 | Owners Manual - Page 32
    another audio selection, play it now and adjust the AVR's master volume control until the meter measures 75dB. If you are using the AVR's internal test tone, then adjust the AVR's master volume to -15dB. Adjust the levels using either the remote control by itself, or using the full-OSD menu system
  • Harman Kardon AVR 154 | Owners Manual - Page 33
    to the receiver. Move the cursor to this line, and press the ‹/ › Buttons until the correct digital input appears. AUTO POLL: The Auto Poll feature is used when both an analog audio and digital audio connection have been made for one source device. If no digital signal is available, the AVR 154 will
  • Harman Kardon AVR 154 | Owners Manual - Page 34
    CD, TAPE, AUX, HDMI 1, HDMI 2, HDMI 3, VID1, VID2, VID3, AM/FM or 6CH. See page 13. NOTE: Any time you press one of the remote's Input Selectors, the remote will switch modes so that it will only operate that device. To control the receiver, press the AVR Button to return the remote to AVR mode. To
  • Harman Kardon AVR 154 | Owners Manual - Page 35
    H:DH message. Dolby Headphone delivers an enhanced sound field that emulates a 5.1-channel speaker system. No other surround modes are available for the headphones. Figure 56 - Source Select and Tuner Band Buttons The AVR 154 will switch to the audio and video inputs and surround mode assigned to
  • Harman Kardon AVR 154 | Owners Manual - Page 36
    analog audio outputs to the AVR's 6-Channel Inputs. d) Connect the player's component video outputs to the Component Video 1 Inputs, as the AVR's 6-Channel Analog Audio Inputs cannot be used together with an HDMI input. e) Program the player's remote control codes into the HDMI 1 Input Selector
  • Harman Kardon AVR 154 | Owners Manual - Page 37
    is prohibited by federal law. AUX Input Enjoy the full power and resolution of your Harman Kardon system, including a variety of analog surround modes, while listening to content stored on your portable device. The Auxiliary Audio Input mini jack is provided on the AVR's rear panel for convenient
  • Harman Kardon AVR 154 | Owners Manual - Page 38
    remote control, locate the button dedicated to the desired group of modes: Logic 7, Dolby Sur, DTS Sur, DTS Neo:6, Surr (DSP) or Stereo. Press that button repeatedly to select the desired mode. See Figure 63. Figure 63 - Select a Surround Mode (Remote) To select a surround mode using the full-OSD
  • Harman Kardon AVR 154 | Owners Manual - Page 39
    mode for the AVR's 6-Channel Inputs. The AVR 154 offers three basic options for playback of analog audio: 1. Analog Bypass Mode: In this mode, the 2-channel signal is passed directly to the volume control, without being digitized or undergoing any processing for bass management or surround sound
  • Harman Kardon AVR 154 | Owners Manual - Page 40
    materials or the disc menu, are only available in Dolby Digital 2.0 (2-channel) or PCM 2-channel mode. If the main title is playing and the letters in the Speaker/Channel Input Indicators are not lit for all speaker locations, look for an audio setup section in the disc's menu. Also, make sure your
  • Harman Kardon AVR 154 | Owners Manual - Page 41
    reset, the AVR 154 defaults to the Logic 7 Music mode for all analog and PCM audio inputs. Subsequently, when a source input is selected and an analog or PCM signal is received, the AVR will switch to the last surround mode used for that source input/incoming signal combination. Dolby Digital
  • Harman Kardon AVR 154 | Owners Manual - Page 42
    surround channels. • Dolby Digital 2.0 or 2.1 • Analog (2-channel) • Tuner • PCM (32kHz, 44.1kHz, 48kHz, 96kHz) Dolby Virtual Speaker Simulates 5.1 channels when fewer speakers are present, or a more Mode Group enveloping sound field is desired. See below. Dolby Virtual Speaker Reference When
  • Harman Kardon AVR 154 | Owners Manual - Page 43
    , 44.1kHz or 48kHz) Logic 7 Mode Group Exclusive to Harman Kardon, Logic 7 enhances 2-channel recordings by deriving separate information for the surround back channels. This provides more accurate placement of sound, improves panning and expands the sound field, even when used with 5.1-channel
  • Harman Kardon AVR 154 | Owners Manual - Page 44
    the front panel of the receiver. FULL OSD TIME OUT: Program the amount of time (20, 30, 40 or 50 seconds) the full-OSD menus remain visible on screen. The full-OSD system may not be deactivated. DEFAULT SURR MODE: This setting determines how the AVR 154 will handle Dolby Digital and DTS sources. For
  • Harman Kardon AVR 154 | Owners Manual - Page 45
    in the display. If the receiver still does not function correctly after a processor reset, contact an authorized Harman Kardon service center for assistance. Service centers may be located by visiting our Web site at www.harmankardon.com. Memory If the AVR 154 is unplugged or experiences a power
  • Harman Kardon AVR 154 | Owners Manual - Page 46
    protection mode due to possible short • Amplifier is in protection mode due to internal problems • Check speaker wire connections for shorts at receiver and speaker ends • Contact your local Harman Kardon service center No sound from surround or center speakers • Incorrect surround mode • Input
  • Harman Kardon AVR 154 | Owners Manual - Page 47
    required NOTE: The AVR 154 is equipped with a total of six digital audio inputs, four on the rear panel (Coaxial 1 and 2, Optical 1 and 2) and two on the front panel (Coaxial 3 and Optical 3), which may be assigned to any of the nine source inputs (DVD, Video 1 through 3, HDMI 1 through 3, CD and
  • Harman Kardon AVR 154 | Owners Manual - Page 48
    APPENDIX Appendix - Default settings, worksheets, remote product codes Table A2 - Source Input Setting Defaults Source DVD HDMI 1 HDMI 2 HDMI 3 Video 1 Video 2 Video 3 AUX CD Tape Tuner 6-Channel Title INT. TUNER Component Comp V 1 Comp V 1 Comp V 2 Comp V 2 Comp V 2 Comp V 2 Comp V 2 Comp
  • Harman Kardon AVR 154 | Owners Manual - Page 49
    A5 - Source Input Settings Source DVD HDMI 1 HDMI 2 HDMI 3 Video 1 Video 2 Video 3 AUX CD Title Video Input Component Video Input Audio Input Dedicated Auto Poll N/A Surround Mode Tape Tuner 6-Channel INT. TUNER Dedicated Dedicated N/A N/A N/A Table A6 - Speaker/Channel Settings
  • Harman Kardon AVR 154 | Owners Manual - Page 50
    APPENDIX Table A7 - Remote Control Codes Source Input Product Type (circle one) Remote Control Code Video 1 VCR, PVR, DMC Video 2 Cable, Satellite Video 3 TV HDMI 1 DVD, VCR/PVR/DMC, Cable/Satellite HDMI 2 DVD, VCR/PVR/DMC, Cable/Satellite HDMI 3 DVD, VCR/PVR/DMC, Cable/Satellite DVD
  • Harman Kardon AVR 154 | Owners Manual - Page 51
    APPENDIX Table A9 - Remote Control Function List No. Button Name AVR Function 1 Power On Power On DVD Power On CD/CD-R Tape Power On VCR (VID1) Power On TiVo (VID1) Power On/Off DMC (VID1/ CBL (VID2) HDMI 1/2/3) Power On Power On SAT (VID2) Power On TV (VID3) Power On HDMI 1/2/3 Power On
  • Harman Kardon AVR 154 | Owners Manual - Page 52
    Remote Control Function List - continued No. Button Name AVR Function DVD CD/CD-R Tape VCR (VID1) 44 Memory Memory Audio or Playlist Time 45 Tuning Up Tuning 57 Dolby Surround Dolby Modes 58 DTS Surround DTS Digital Modes 59 DTS Neo:6 DTS Neo:6 Select 60 Night Night Mode Select Subtitle
  • Harman Kardon AVR 154 | Owners Manual - Page 53
    codes for your components into the remote. Table A10 - Remote Control Product Codes - TV TV Manufacturer/Brand Setup Code Number TV Manufacturer/Brand Setup Code GOLDSTAR/LG GRUNDIG HALL MARK HARMAN KARDON HITACHI INFINITY INKEL JBL JC PENNEY 033 034 035 036 123 128 132 154 148 024 123 128 128 132
  • Harman Kardon AVR 154 | Owners Manual - Page 54
    090 122 Table A11 - Remote Control Product Codes - VCR VCR Manufacturer/Brand Setup Code Number AIWA AKAI AMPRO ASA AUDIO DYNAMICS BROKSONIC CANDLE CANON CAPEHART CITIZEN COMCAST CRAIG DAEWOO DAYTRON DBX DYNATECH EMERSON FISHER FUNAI GE GO VIDEO GOLDSTAR/LG HARMAN KARDON HITACHI JC PENNEY JENSEN
  • Harman Kardon AVR 154 | Owners Manual - Page 55
    085 086 106 107 110 121 137 154 154 039 013 074 097 151 155 173 087 120 130 095 019 031 053 061 135 169 166 Table A13 - Remote Control Product Codes - DVD DVD Manufacturer/Brand Setup Code Number APEX DIGITAL DENON GE GOLDSTAR/LG HARMAN KARDON JVC MAGNAVOX MARANTZ MITSUBISHI NAD ONKYO PANASONIC
  • Harman Kardon AVR 154 | Owners Manual - Page 56
    RCA RCA DSS REALISTIC SAMSUNG SATELLITE SERVICE CO SCIENTIFIC ATLANTA SONY STAR CHOICE DBS STARCAST SUPER GUIDE TEECOM TOSHIBA UNIDEN ZENITH 472 385 387 394 419 488 HARMAN KARDON 001 Table A16 - Remote Control Product Codes - CBL CBL Manufacturer/Brand Setup Code Number ABC ALLEGRO AMERICAST
  • Harman Kardon AVR 154 | Owners Manual - Page 57
    Table A16 - continued CBL Manufacturer/Brand Setup Code Number SIGNATURE SPRUCER STARCOM STARGATE TANDY TELECAPATION TEXSCAN TFC TIMELESS TOCOM UNITED CABLE UNIVERSAL VIDEOWAY VIEWSTAR ZENITH ZENTEK 001 188 053 081 177 189 002
  • Harman Kardon AVR 154 | Owners Manual - Page 58
    AVR 154 TECHNICAL SPECIFICATIONS Audio Section Stereo Mode Continuous Average Power (FTC) 40 Watts per channel, 20Hz-20kHz, @
  • Harman Kardon AVR 154 | Owners Manual - Page 59
    NOTES 59
  • Harman Kardon AVR 154 | Owners Manual - Page 60
    250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2008 Harman International Industries, Incorporated. All rights reserved. Part No. CQX1A1309Z
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

AVR 154
AUDIO/VIDEO RECEIVER
OWNER’S MANUAL