Harman Kardon AVR 247 Owners Manual

Harman Kardon AVR 247 Manual

Get Harman Kardon AVR 247 PDF manuals and user guides View all Harman Kardon AVR 247 manuals
Add to My Manuals
Save this manual to your list of manuals

Harman Kardon AVR 247 manual content summary:

  • Harman Kardon AVR 247 | Owners Manual - Page 1
    AVR 247 AUDIO/VIDEO RECEIVER OWNER'S MANUAL
  • Harman Kardon AVR 247 | Owners Manual - Page 2
    , be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 23. Safety Check. Upon completion of any service or repairs to this
  • Harman Kardon AVR 247 | Owners Manual - Page 3
    to a variety of factors beyond Harman Kardon's control, including the nature of the finish, cleaning materials used, and normal heat and vibration caused by the use of the product, or other factors. We recommend that caution be exercised in choosing an installation location for the component and in
  • Harman Kardon AVR 247 | Owners Manual - Page 4
    STAPLE INVOICE HERE 4
  • Harman Kardon AVR 247 | Owners Manual - Page 5
    OF CONTENTS 2 SAFETY INFORMATION 6 INTRODUCTION 8 FRONT-PANEL CONTROLS 10 REAR-PANEL CONNECTIONS 13 REMOTE CONTROL FUNCTIONS 16 INTRODUCTION TO HOME THEATER 17 CONNECTIONS 17 Speaker Connections 17 Subwoofer 17 Connecting Source Devices to the AVR 18 Audio Connections 18 Digital
  • Harman Kardon AVR 247 | Owners Manual - Page 6
    that enhance the home entertainment experience. In the years since our first single-channel component was introduced, Harman Kardon has offered a number of receiver models, each an improvement upon its predecessors, leading to the AVR 247, a 7.1-channel digital audio/video receiver that offers
  • Harman Kardon AVR 247 | Owners Manual - Page 7
    one optical) • Simplay HD-verified HDMI • Multiroom audio: speaker- and line-level (shared with surround back channels) • Headphone Ease of Use • EzSet/EQ™ automated setup (microphone supplied) • Graphic on-screen display with HDMI, component, composite and S-video • Two-line dot-matrix front-panel
  • Harman Kardon AVR 247 | Owners Manual - Page 8
    remote control. It is important to ensure that it is not blocked. If covering the sensor is unavoidable, such as when the AVR 247 is placed inside a cabinet, you may use an optional Harman Kardon HE 1000, or other infrared receiver, connecting it to the Remote IR Input on the AVR 247's rear panel
  • Harman Kardon AVR 247 | Owners Manual - Page 9
    Channel Level Adjust Speaker Size Tone Mode Setup Navigation Surround Mode Indicators Message Display Source Remote Digital Input Indicators IR Sensor Select Speaker/Channel Input Indicators Delay Volume Power Indicator Standby/On Main Power Switch Switch Surround Mode Surround Select
  • Harman Kardon AVR 247 | Owners Manual - Page 10
    the receiver and the speaker. See the Connections section for more information on connecting your speakers. Surround Back/Multiroom Speaker Outputs: These speaker outputs may be used either for the surround back channels in a 7.lchannel home theater, or they may be reassigned to a remote room for
  • Harman Kardon AVR 247 | Owners Manual - Page 11
    an HDMI-capable video display. RS-232 Serial Port: This specialized connector may be used with your personal computer in case Harman Kardon offers a software upgrade for the receiver at some time in the future. RS-232 Mode: Leave this switch popped out in the Operate position unless the AVR 247 is
  • Harman Kardon AVR 247 | Owners Manual - Page 12
    & 2) Reset Component Video Monitor The HDMI Bridge/ Output DMP HDMI 1 Input HDMI 2 Input Outputs Input AC Power Cord RS-232 Serial Port RS-232 Mode Tape Remote Preamp Outputs IR Input Outputs Surround Back/ Multiroom Preamp Outputs Tape CD Inputs Inputs Multiroom Subwoofer Remote IR
  • Harman Kardon AVR 247 | Owners Manual - Page 13
    Press this button to select the 6-/8-Channel Inputs as the audio source. The receiver will use the video input and remote control codes for the last-selected video source. Test Tone: Press this button to activate the test tone for manual output-level calibration. TV/Video: This button has no effect
  • Harman Kardon AVR 247 | Owners Manual - Page 14
    Input Selectors 6-/8-Channel Input Selector TV/Video Volume Controls Multiroom Speaker Setup Navigation Set Delay Numeric Keys Memory Clear Preset Stations Selectors Disc Skip Macros Surround Mode Selectors Dim NOTE: To make it easier to follow the instructions throughout the manual that refer to
  • Harman Kardon AVR 247 | Owners Manual - Page 15
    in the Message Display. DSP Surround: Press this button to select a DSP surround mode (Hall 1, Hall 2, Theater). On-Screen Display (OSD): Press this button to activate the on-screen menu system. Multiroom: Press this button to control the multiroom system. Three settings are available: MULTI ON/OFF
  • Harman Kardon AVR 247 | Owners Manual - Page 16
    with a multiroom system, in which you use the surround back channels to power a pair of loudspeakers located in another room. Many people expect the surround speakers to play as loudly as the front speakers. Although all of the speakers in the system will be calibrated to sound equally loud at the
  • Harman Kardon AVR 247 | Owners Manual - Page 17
    Table 1 - Connection Color Guide Audio Connections Front (FL/FR) Center (C) Surround (SL/SR) Surround Back (SBL/SBR) Subwoofer (SUB) Digital Audio Connections Coaxial Optical Video Connections Component Y Composite S-Video HDMI™ Connections (digital audio/video) HDMI Left Input Pb Right
  • Harman Kardon AVR 247 | Owners Manual - Page 18
    their original high-quality resolution, depending on your display's capabilities. You may view the AVR 247's own on-screen display menus using the HDMI output. IMPORTANT NOTE: The AVR 247 cannot convert 1080i or 1080p analog video signals to the HDMI format, but passes 1080i signals in their native
  • Harman Kardon AVR 247 | Owners Manual - Page 19
    internally and output linear PCM signals in digital format. Consult the owner's guide for your disc player for more information. Multichannel analog audio cable (RCA) Front Surround Center Subwoofer Figure 8 - Multichannel Analog Audio Harman Kardon receivers also include a proprietary, dedicated
  • Harman Kardon AVR 247 | Owners Manual - Page 20
    Port The RS-232 serial port on the AVR 247 is used only for data. If Harman Kardon releases a software upgrade for the receiver's operating system at some time in the future, the upgrade may be downloaded to the AVR using this port. Complete instructions will be provided at that time. Figure 12
  • Harman Kardon AVR 247 | Owners Manual - Page 21
    . If you're using only two speakers with the AVR 247, place them in the front left and right positions, and skip to the Installation section. However, Harman Kardon recommends using the AVR 247 in a 5.1- or 7.1-channel configuration for optimal surround sound performance. SUB C FL FR 30° 30
  • Harman Kardon AVR 247 | Owners Manual - Page 22
    need to follow the directions in the Advanced Features section for manual setup of the surround back speaker. Subwoofer Placement The subwoofer's location is less critical, since low-frequency sounds are omnidirectional. Placing the subwoofer close to a wall or in a corner will reinforce the low
  • Harman Kardon AVR 247 | Owners Manual - Page 23
    negative terminals on the receiver. Use the Connection Color Guide on page 17 as a reference. C AVR 247 FR FL SR SL SBR SBL Figure 17 - Speaker Connections NOTE: If you only have one surround back speaker, wait until after you have run EzSet/EQ in the Initial Setup section before connecting
  • Harman Kardon AVR 247 | Owners Manual - Page 24
    or other audio/video device Video 4 (front-panel jacks) • Video 4 Analog Inputs and • Either Coax 3 or Optical 3 Input • Video 4 S-video or Video 4 Composite Video Input • Not required if sources is a TV DVD Audio/Video, DVD SACD, HD-DVD, Blu-ray Disc • DVD Analog Inputs • 6-/8-Channel Inputs
  • Harman Kardon AVR 247 | Owners Manual - Page 25
    receiver and remote control. However, you may connect any device to any source input. NOTE: The AVR 247 is equipped with a total of six digital audio inputs, not including the HDMI inputs: four on the rear panel (Coaxial 1 and 2, Optical 1 and 2) and two on the front panel (Coaxial 3 and Optical
  • Harman Kardon AVR 247 | Owners Manual - Page 26
    not used with any of the 2-channel analog audio or video inputs on the AVR 247. Make sure your video display is HDMI-capable, and for many source devices, the display must be HDCP-compliant (High-Bandwidth Digital Content Protection) in order to display copy-protected materials. If the source device
  • Harman Kardon AVR 247 | Owners Manual - Page 27
    AVR 247. See Figure 29. Refer to the owner's manual for The Bridge to select the appropriate insert to match your iPod. Figure 29 - The Bridge/DMP Connector Step Five - Connect the Video Display Only video connections should be made between the receiver and your video display (TV), unless your TV
  • Harman Kardon AVR 247 | Owners Manual - Page 28
    to the CD device mode. The AVR 247's remote is factory-programmed to control an iPod docked in The Bridge and many Harman Kardon DVD and CD players. If you have other source devices in your system, follow these steps to program the correct codes into the remote. 1. Using the codes in Tables A9-A16
  • Harman Kardon AVR 247 | Owners Manual - Page 29
    optional Harman Kardon HE 1000, to the Remote IR Input jack. When you are using the AVR 247 in multiroom mode, you may connect an optional IR receiver, keypad or other control device to the Multiroom IR Input for remote control of the AVR 247 (and any sources connected to the AVR's Remote IR Output
  • Harman Kardon AVR 247 | Owners Manual - Page 30
    located in several different rooms, or when listening to mono FM radio, to individual speakers placed in different rooms. Use the Tuning Mode Button to select the mono mode for FM radio. In addition to the audio signal, you will usually wish to connect an IR control device to the AVR 247's Multiroom
  • Harman Kardon AVR 247 | Owners Manual - Page 31
    ‹/› and Set Buttons on the front panel have no effect on the OSD system. The OSD system consists of six main menus: Input Setup, Surround Setup, Speaker Setup, Multiroom Setup, Video Setup and System Setup. Navigation tabs for each menu appear on the left side of the screen. When you first press the
  • Harman Kardon AVR 247 | Owners Manual - Page 32
    will appear. Although the AVR 247 may be used with up to eight speakers, you may have elected not to install surround back speakers at this time, or you may have decided to use the surround back speaker channels to power speakers in the remote room of a multiroom system. This screen directs you to
  • Harman Kardon AVR 247 | Owners Manual - Page 33
    EzSet/EQ ensures that all speakers sound equally loud at the listening position. During a surround sound presentation it is common for the surround channels to sound less prominent, or not to be used at all at times. By setting the baseline channel levels correctly, the AVR serves as a blank canvas
  • Harman Kardon AVR 247 | Owners Manual - Page 34
    point or points at which the audio signal is passed from one transducer within the speaker to another. Equalization (EQ): Many factors unique to the listening room can affect the overall sound of a home theater system. For example, a room consisting of hardwood floors and large expanses of glass can
  • Harman Kardon AVR 247 | Owners Manual - Page 35
    indicator and press the Set Button to return to the Input Setup menu. Although the Source Input name will remain the same in the Input Setup menu, the new title will appear in the semi-OSD displays and the front-panel display as appropriate. NOTES: • Only upper case letters are available for titles
  • Harman Kardon AVR 247 | Owners Manual - Page 36
    the AVR's analog video outputs, try changing the Video Mode setting to Mode B. If you continue to observe problems, connect your source device's video output directly to the video display, or consider upgrading to an HDMI-capable display. You are now ready to begin enjoying your new receiver! 36
  • Harman Kardon AVR 247 | Owners Manual - Page 37
    , VID3, VID4 or HDMI 1/HDMI 2), the remote will switch modes so that it will only operate that device. To control the receiver, press the AVR Button to return the remote to AVR mode. To turn the receiver off, press either the Standby/On Switch on the front panel, or press the AVR Button and the OFF
  • Harman Kardon AVR 247 | Owners Manual - Page 38
    an enhanced sound field that emulates a 5.1-channel speaker system. No other surround modes are available for the headphones. Source Selection Press the front-panel Source Select Button to scroll through the sources. The left side of the button scrolls down the list that appears in the display; the
  • Harman Kardon AVR 247 | Owners Manual - Page 39
    The surround mode will be displayed on the lower line. The same information will also appear on screen in the semi-OSD, unless you have set the semi-OSD to OFF in the System Setup menu, as described in the Advanced Functions section. Audio Input Selection The AVR 247 is programmed at the factory to
  • Harman Kardon AVR 247 | Owners Manual - Page 40
    and output linear PCM signals in digital format. Consult the owner's guide for your disc player for more information. Using the Tuner The AVR 247's built-in tuner may be selected in one of three ways (see Figure 69): 1. Press the Source Selector Button on the front panel repeatedly until the
  • Harman Kardon AVR 247 | Owners Manual - Page 41
    press the Direct Button first. 2. Press the Tuning Buttons on the front panel or remote to scan through the channels. Auto tuning mode is not available. 3. The AVR 247 is capable of storing up to 40 XM Radio preset channels. The presets are divided into five banks, denoted by the letters A through
  • Harman Kardon AVR 247 | Owners Manual - Page 42
    use the AVR 247 remote instead of the iPod's controls to navigate it, but the iPod's menu will only be displayed on its internal screen. Visual materials will be displayed on a video display connected to the AVR. NOTE: After selecting video/photo viewing, the AVR may remain in iPod Manual Mode, even
  • Harman Kardon AVR 247 | Owners Manual - Page 43
    upper line in the front panel Message Display. The lower line will display the elapsed time of the track on the left, the play mode icon, and the time remaining on the right. In addition, if a video display is connected to the AVR 247, a screen will appear briefly to display information about the
  • Harman Kardon AVR 247 | Owners Manual - Page 44
    Setup Menu Screen You are now ready to enjoy the best in home theater entertainment with your AVR 247. As you become more familiar with the receiver, you may wish to explore some of its advanced functions, which are described in the following section. Figure 79 - Select a Surround Mode (Front Panel
  • Harman Kardon AVR 247 | Owners Manual - Page 45
    -ES (6.1 Matrix and Discrete), DTS 96/24 and 2-channel PCM modes in 32kHz, 44.1kHz, 48kHz or 96kHz. When a digital signal is received, the AVR 247 detects the encoding method and the number of channels. The appropriate icon will light in the front panel for Dolby Digital and DTS signals. The number
  • Harman Kardon AVR 247 | Owners Manual - Page 46
    on which surround modes are available with different bitstreams. When a PCM signal is received, the PCM message, followed by the sampling rate of the signal (32kHz, 44.1kHz, 48kHz or 96kHz), will scroll once across the front-panel display. In addition, the Speaker/Channel Input Indicators
  • Harman Kardon AVR 247 | Owners Manual - Page 47
    on the front panel and in the semi-OSD display. Default Modes During initial use or after a processor reset, the AVR 247 will default to the Logic 7 7CH Music mode for all analog and PCM audio inputs. Subsequently, when a source input is selected and an analog or PCM signal is received, the AVR will
  • Harman Kardon AVR 247 | Owners Manual - Page 48
    , 48kHz, 96kHz) Dolby Pro Logic IIx Mode Group An expansion of Dolby Pro Logic II that adds a surround back channel which may be played through one or two surround back speakers. The Dolby Pro Logic IIx modes may be selected not only with Dolby Digital bitstreams, but thanks to the AVR 247's post
  • Harman Kardon AVR 247 | Owners Manual - Page 49
    when signal does not contain center channel information) • Analog (2-channel) • Tuner • PCM (32kHz, 44.1kHz or 48kHz) Dolby Virtual Speaker Wide mode may be used with two, three, four or five main speakers to Wide widen the front soundstage by virtualizing the locations of the left and right
  • Harman Kardon AVR 247 | Owners Manual - Page 50
    sources containing Dolby Surround or matrix encoding, Logic 7 Cinema mode increases center channel intelligibility. • Analog (2-channel) • Tuner • PCM (32kHz, 44.1kHz, 48kHz, 96kHz) The AVR 247 is programmed at the factory to default to this mode for 2-channel signals. Logic 7 Music mode is well
  • Harman Kardon AVR 247 | Owners Manual - Page 51
    manual setup you will need to have fully installed your AVR, placed your loudspeakers in their correct locations within the room (see Speaker Placement section), and connected them to the AVR. You will need the specifications for each of your speakers, which may usually be found in the owner's guide
  • Harman Kardon AVR 247 | Owners Manual - Page 52
    without also connecting the front and side surround speakers. However, the AVR 247 has the capability to reassign the surround back amplifier channels to the multiroom system, enabling you to use these channels to power a pair of speakers in another room independently of the speakers you use in your
  • Harman Kardon AVR 247 | Owners Manual - Page 53
    to return to the previous display, or wait a few seconds for the AVR to return to normal operation on its own. NOTE: The Speaker/Channel Indicators on the front panel of the receiver (see Figure 82) will display the speaker size settings as follows. For each speaker configured as SMALL, a single
  • Harman Kardon AVR 247 | Owners Manual - Page 54
    the front panel and in the semi-OSD display. Press the Set Button to display the current delay setting, and use the ⁄/¤ Buttons to adjust the setting until the picture and sound are back in sync. RESET: This line is used if you wish to reset all of the speaker delay settings to the factory default
  • Harman Kardon AVR 247 | Owners Manual - Page 55
    correct settings for those surround modes. Video Adjustments The AVR 247 includes sophisticated DCDi by Faroudja video processing that delivers enhanced video quality, even for older analog video source components, as well as upgraded on-screen displays. When upscaling video materials from a lower
  • Harman Kardon AVR 247 | Owners Manual - Page 56
    system. All remote rooms will hear the same source, even when a multichannel amplifier is used. There are two ways of connecting the remote speakers to the AVR 247: a) Connect the speakers to the left and right Surround Back/Multiroom Speaker Outputs on the rear panel of the AVR 247. This is
  • Harman Kardon AVR 247 | Owners Manual - Page 57
    . Remember that sending control commands from one room in the system will affect the entire remote zone of the multiroom system. Operating the Multiroom System The AVR 247's multiroom system is accessed using the on-screen Multiroom Setup menu. Press the OSD Button to display the menu System, and
  • Harman Kardon AVR 247 | Owners Manual - Page 58
    mode, but you may select another Dolby surround mode manually. For PCM and analog sources, the factory default surround mode is Logic 7 Music. In general, the receiver will use the surround mode selected the last time that type of signal was received. Dim Function Some people find the front-panel
  • Harman Kardon AVR 247 | Owners Manual - Page 59
    hold the front-panel Tone Mode Button for at least five seconds until the RESET message appears in the display. If the receiver still does not function correctly after a processor reset, contact an authorized Harman Kardon service center for assistance. Authorized service centers may be located by
  • Harman Kardon AVR 247 | Owners Manual - Page 60
    possible short • Amplifier is in protection mode due to internal problems • Check speaker wire connections for shorts at receiver and speaker ends • Contact your local Harman Kardon service center No sound from surround or center speakers • Incorrect surround mode • Input is monaural • Incorrect
  • Harman Kardon AVR 247 | Owners Manual - Page 61
    AVR 247 TECHNICAL SPECIFICATIONS Audio Section Stereo Mode Continuous Average Power (FTC) 65 Watts per channel, 20Hz-20kHz, @
  • Harman Kardon AVR 247 | Owners Manual - Page 62
    default shown is the preferred surround mode for PCM and Analog audio sources. Logic 7 Logic 7 Logic 7 Logic 7 Logic 7 7CH Music 7CH Music 7CH Music 7CH Music 7CH Music Table A2 - Speaker/Channel Setting Defaults Source DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/ CD DMP Tape
  • Harman Kardon AVR 247 | Owners Manual - Page 63
    Auto Poll Surround Mode Tone Mode Bass Treble Video Mode Table A5 - Speaker/Channel Settings Source DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP CD Tape Tuner 6-/8-Channel†† XM Left/Right Speaker Size N/A Center Speaker Size N/A Surround Speaker Size N/A Subwoofer
  • Harman Kardon AVR 247 | Owners Manual - Page 64
    25dB Semi-OSD Time Out 5 seconds Full-OSD Time Out 20 seconds Default Surround Mode On Your Setting Remote Control Code Copyright (c) Software may be sold as part of a larger software package but no copy of one or more of the Font Software typefaces may be sold by itself. THE FONT SOFTWARE
  • Harman Kardon AVR 247 | Owners Manual - Page 65
    61 62 63 64 65 66 67 68 69 70 Refer to the numbered buttons in Figure 92 when using the Function List. Figure 92 - Remote Control Function List Reference 65
  • Harman Kardon AVR 247 | Owners Manual - Page 66
    - Channel - 20 OSD OSD Program OSD Live TV OSD OSD 21 M-Room Multiroom HD Mode 22 Vol Down Volume Down Volume Down Volume Down Volume Down Volume Down Volume Down 23 CH./Guide Channel Trim Title or Disc Menu Continuous Play Guide Info/Guide Info/Guide 24 Speaker/Menu Speaker Setup Menu
  • Harman Kardon AVR 247 | Owners Manual - Page 67
    Surround Dolby Modes 57 DTS Surround DTS Digital Modes 58 DTS Neo:6 DTS Neo:6 Select 59 Night Night Mode Next Alt TV (VID3/VID4) Sleep (DMP) XM TheBridgeTM HDMI 1/2 Memory controls are pressed while the remote is in AVR, Video 2 or Video 3 mode, the remote will automatically switch to DVD mode
  • Harman Kardon AVR 247 | Owners Manual - Page 68
    codes for your components into the remote. Table A9 - Remote Control Product Codes - TV TV Manufacturer/Brand Setup Code Number TV Manufacturer/Brand Setup Code EMERSON FUNAI FUTURETECH GE GOLDSTAR/LG GRUNDIG HALL MARK HARMAN KARDON HITACHI INFINITY INKEL JBL JC PENNEY JENSEN JVC KAWASHO KEC
  • Harman Kardon AVR 247 | Owners Manual - Page 69
    045 025 123 128 145 148 184 077 063 181 128 045 069 115 123 128 132 069 TV Manufacturer/Brand TERA THOMSON TMK TOSHIBA TOTEVISION VIDEO CONCEPTS VIDTECH WARDS YAMAHA YORK YUPITERU ZENITH ZONDA Setup Code Number 156 190 191 128 063 129 202 132 160 128 069 128 132 148 123 128
  • Harman Kardon AVR 247 | Owners Manual - Page 70
    APPENDIX Table A10 - Remote Control Product Codes - VCR VCR Manufacturer/Brand Setup Code Number AIWA AKAI AMPRO ASA AUDIO DYNAMICS BROKSONIC CANDLE CANON CAPEHART CITIZEN CRAIG DAEWOO DAYTRON DBX DYNATECH EMERSON FISHER FUNAI GE GO VIDEO GOLDSTAR/LG HARMAN KARDON HITACHI JC PENNEY JENSEN JVC
  • Harman Kardon AVR 247 | Owners Manual - Page 71
    Table A11 - Remote Control Product Codes - CD CD Manufacturer/Brand Setup Code Number ADCOM AIWA AKAI AUDIO TECHNICA AUDIOACCESS AUDIOFILE BSR CALIFORNIA AUDIO CAPETRONIC CARRERA CARVER CASIO CLARINETTE DENON EMERSON FISHER FRABA FUNAI GE GENEXXA GOLDSTAR/LG HAITAI HARMAN KARDON HITACHI INKEL JC
  • Harman Kardon AVR 247 | Owners Manual - Page 72
    Remote Control Product Codes - SAT SAT Manufacturer/Brand Setup Code Number ALPHASTAR ALPHASTAR DBS ALPHASTAR DSR BIRDVIEW CHANNEL MASTER CHAPARRAL CITOH DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME SAMSUNG SATELLITE SERVICE CO SCIENTIFIC ATLANTA SONY STAR CHOICE DBS STARCAST SUPER GUIDE TELECOM TOSHIBA
  • Harman Kardon AVR 247 | Owners Manual - Page 73
    APPENDIX Table A14 - Remote Control Product Codes - TAPE Tape Manufacturer/Brand Setup Code Number HARMAN KARDON 001 Table A15 - Remote Control Product Codes - CBL CBL Manufacturer/Brand Setup Code Number ABC ALLEGRO AMERICAST ARCHER BELCOR CABLE STAR CITIZEN COLOUR VOICE DIGI EAGLE EASTERN
  • Harman Kardon AVR 247 | Owners Manual - Page 74
    NOTES 74
  • Harman Kardon AVR 247 | Owners Manual - Page 75
    NOTES
  • Harman Kardon AVR 247 | Owners Manual - Page 76
    ® 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2007 Harman International Industries, Incorporated. All rights reserved. Part No. CQX1A1184Z
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
AVR 247
AUDIO/VIDEO RECEIVER
OWNER’S MANUAL