Harman Kardon AVR 254 Owners Manual

Harman Kardon AVR 254 Manual

Get Harman Kardon AVR 254 PDF manuals and user guides View all Harman Kardon AVR 254 manuals
Add to My Manuals
Save this manual to your list of manuals

Harman Kardon AVR 254 manual content summary:

  • Harman Kardon AVR 254 | Owners Manual - Page 1
    AVR 254 AUDIO/VIDEO RECEIVER OWNER'S MANUAL
  • Harman Kardon AVR 254 | Owners Manual - Page 2
    shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Service Instructions CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any
  • Harman Kardon AVR 254 | Owners Manual - Page 3
    Line Voltage Before Use Your AVR 254 has been designed for use with 120-volt AC current. Connection to a line voltage fail to comply with Part 15 of the FCC Rules and may void the user's authority to operate the equipment. Unpacking The carton and shipping materials used to protect your new receiver
  • Harman Kardon AVR 254 | Owners Manual - Page 4
    STAPLE INVOICE HERE 4
  • Harman Kardon AVR 254 | Owners Manual - Page 5
    Four - Setting Channel Output Levels Manually 48 Audio Effects 49 Video Adjustments 49 Video Modes 50 How to Adjust the Custom Picture Settings 51 Multizone Operation 51 Installing a Multizone System 51 Operating the Multizone System 52 System Settings 53 Advanced Remote Control
  • Harman Kardon AVR 254 | Owners Manual - Page 6
    our Web site at www.harmankardon.com. Harman Kardon AVR 254 7.1-Channel Audio/Video Receiver Audio Section • 50 Watts x 7, seven channels driven at full power at 8 ohms, 20Hz - 20kHz,
  • Harman Kardon AVR 254 | Owners Manual - Page 7
    infrared (IR) input and output • Zone 2 IR input Supplied Accessories The following accessory items are supplied with the AVR 254. If any of these items are missing, please contact Harman Kardon customer service at www.harmankardon.com. • System remote control • EzSet/EQ microphone • AM loop antenna
  • Harman Kardon AVR 254 | Owners Manual - Page 8
    remote control. It is important to ensure that it is not blocked. If covering the sensor is unavoidable, such as when the AVR 254 is placed inside a cabinet, you may use an optional Harman Kardon HE 1000, or other infrared receiver, connecting it to the Remote IR Input on the AVR 254's rear panel
  • Harman Kardon AVR 254 | Owners Manual - Page 9
    Input / Navigation Back/ Exit Digital Audio Inputs (Optical 3 and Coaxial 3) Video 4 Analog Audio Inputs Video 4 Video Inputs NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support
  • Harman Kardon AVR 254 | Owners Manual - Page 10
    CONNECTIONS Audio Effects: Press this button to directly access the Audio Effects submenu, which allows adjustment of the tone and other controls. See the Initial Setup section for more information. Video Modes: Press this button for direct access to the Video Modes submenu, which contains settings
  • Harman Kardon AVR 254 | Owners Manual - Page 11
    the AVR 254 will convert the composite or S-video source signal to the correct format for a single video cable connection to the TV. HDMI Inputs and Output: HDMI (High-Definition Multimedia Interface) is a connection for transmitting digital audio and video signals between devices. With the AVR 254
  • Harman Kardon AVR 254 | Owners Manual - Page 12
    playing. However, the AVR 254 does not convert digital audio sources to analog for recording. Coaxial 1/2 and Optical 1/2 Digital Audio Inputs: If a source has a compatible digital audio output, and if you are not using an HDMI connection for audio for the device, connect it to one of these jacks to
  • Harman Kardon AVR 254 | Owners Manual - Page 13
    RS-232 Reset RS-232 Mode Analog 1-5 Zone 2 Subwoofer Remote Inputs IR Input Output IR Output Surround Back/Zone 2 Speaker Outputs Surround Center Speaker Speaker Outputs Outputs Optical 1 and 2 RS-232 Digital Audio Serial Port NOTE: To make it easier to follow the instructions throughout
  • Harman Kardon AVR 254 | Owners Manual - Page 14
    of the AVR 254's audio and video inputs are independently assignable. As explained in the Initial Setup section, it is necessary to set up each source, which includes selecting the inputs to which the device is physically connected. Any device may be connected to any compatible input and given any
  • Harman Kardon AVR 254 | Owners Manual - Page 15
    Off Video Modes Surround Modes Activity Menu Navigation OK Disc Menu Channel Transport Controls Source Settings Sleep Settings NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support
  • Harman Kardon AVR 254 | Owners Manual - Page 16
    or a television to change channels. The Page control may be available with some DVD players when playing a DVD Audio disc containing pages of images associated with a track. Record Button: Use this button to make recordings when an audio or video recorder is in use. AVR Settings Button: Press this
  • Harman Kardon AVR 254 | Owners Manual - Page 17
    home theater typically includes an audio/video receiver, which controls the system; a DVD player; a source component for television broadcasts, which may be a cable box, a satellite dish receiver, an HDTV tuner or simply an antenna connected to the TV; a video display (television); and loudspeakers
  • Harman Kardon AVR 254 | Owners Manual - Page 18
    Source Devices to the AVR The AVR 254 is designed to process audio and video input signals, playing back the audio and displaying the video on a television or monitor connected to the AVR. These signals originate in what are known as "source devices," including your DVD player, CD player, DVR
  • Harman Kardon AVR 254 | Owners Manual - Page 19
    audio connections when using the Surround Back/Zone 2 speaker outputs, in case another two-channel digital audio source is in use in the main listening area. The AVR 254 is only capable of processing one PCM source at a time. You may only record materials from DVDs or other copy-protected sources
  • Harman Kardon AVR 254 | Owners Manual - Page 20
    - Multichannel Analog Audio The AVR 254 also offers an analog audio input on the rear panel in the form of a stereo 1/8" mini jack. Connect the headphone output of any audio source, such as an MP3 player or portable CD player, to the Stereo Jack input. See Figure 9. Composite video cable Figure 10
  • Harman Kardon AVR 254 | Owners Manual - Page 21
    to enjoy the AVR 254's ease of control. RS-232 Serial Port The RS-232 serial port on the AVR 254 is used only for software upgrades. If we release an upgrade for the receiver's operating system at some time in the future, it may be downloaded to the AVR using this port. Complete instructions will be
  • Harman Kardon AVR 254 | Owners Manual - Page 22
    EX, DTS-ES Discrete and Matrix modes and DTS Neo:6 mode. We do not recommend using the AVR 254 in a 6.1-channel configuration. In fact, the 6.1-channel formats will sound better when played through a 7.1-channel system. The same surround back channel information is played through both surround
  • Harman Kardon AVR 254 | Owners Manual - Page 23
    is easily done by purchasing an optional Y-Adapter with one male RCA plug and two female RCA jacks. Connect the male jack to the Subwoofer output on the AVR's rear panel, and then run a standard interconnect cable from the Y-Adapter to the Line Input of each subwoofer. You may then place the two
  • Harman Kardon AVR 254 | Owners Manual - Page 24
    /EQ process in the Initial Setup section before connecting it to the Surround Back Left speaker outputs. Step Two - Connect the Subwoofer Connect the Subwoofer Output on the AVR 254 to the line-level input on your subwoofer. See Figure 18. Consult the manufacturer's guide for the subwoofer for
  • Harman Kardon AVR 254 | Owners Manual - Page 25
    22): • Connect the DVD player's component video output to the Component Video 1 or 2 Input on the AVR. • Connect one of the DVD player's digital audio outputs to one of the Coaxial or Optical inputs on the AVR. AVR 254 Connect a DVD, SACD, Blu-ray Disc or HD-DVD Player HDMI Video: If the DVD player
  • Harman Kardon AVR 254 | Owners Manual - Page 26
    the instructions in the Composite/S-Video section for making connections required for recordings. AVR 254 • If you wish to make recordings from a DVD, use an S-video or composite video input, and an Analog Audio input in addition to any other connections. The AVR cannot make recordings from HDMI or
  • Harman Kardon AVR 254 | Owners Manual - Page 27
    specialty stores or through the Harman Kardon Parts Dept. You may then connect it to any set of analog audio inputs. • Although there is no official source on the AVR 254 named CD, Phono or Audio, you may assign the audio device to an available source, such as TV (if the Cable/Sat source is in use
  • Harman Kardon AVR 254 | Owners Manual - Page 28
    Audio Inputs. 28 Figure 32 - HDMI Monitor Output Component Video: If the display does not have HDMI inputs, but does have component video inputs, connect the Component Video Monitor Outputs to the display (see Figure 33). As with HDMI connections, the AVR 254 is capable of converting composite
  • Harman Kardon AVR 254 | Owners Manual - Page 29
    remote's device mode. This is done by pressing the AVR Settings Button to access the codes that control the receiver, or the Source Selector Buttons to access the codes for the devices programmed into the remote. The AVR 254's remote is factory-programmed to control many Harman Kardon DVD players
  • Harman Kardon AVR 254 | Owners Manual - Page 30
    the optional Harman Kardon HE 1000, to the Remote IR Input jack. When you are using the AVR 254 in multizone mode, you may connect an optional IR receiver, keypad or other control device to the Zone 2 IR Input for remote control of the AVR 254 (and any sources connected to the AVR's Remote IR Output
  • Harman Kardon AVR 254 | Owners Manual - Page 31
    means you cannot listen to 6.1- or 7.1-channel programs in the main room. Select one or both: 1. Connect the remote room's speakers directly to the Surround Back/Zone 2 Speaker Outputs. See Figure 39. AVR 254 AVR 254 Figure 40 - Surround Back/Multiroom Preamp Outputs This method requires you to
  • Harman Kardon AVR 254 | Owners Manual - Page 32
    Source Selectors on the remote (i.e., Cable/Sat, DVD, Media Server, Radio, TV, Game or AUX), the remote will switch modes to transmit the codes programmed to operate that device. To control the receiver, press the AVR Settings Button to return the remote to AVR mode. Some AVR functions are available
  • Harman Kardon AVR 254 | Owners Manual - Page 33
    INITIAL SETUP Before you begin enjoying your new receiver, a few adjustments should be made to configure the AVR 254 to match your actual system. Make sure that you have connected a video display to one of the video monitor outputs on the receiver. When you turn on your display and the AVR, if the
  • Harman Kardon AVR 254 | Owners Manual - Page 34
    Figure 45 - Plug EzSet/EQ microphone into receiver. Step Three - Make sure that the AVR 254 and the video display are turned on. Press the AVR Settings Button to display the Main Menu. See Figure 43. Use the ¤ Button to highlight the Speaker Setup line, and then press the OK Button. See Figure
  • Harman Kardon AVR 254 | Owners Manual - Page 35
    the analog audio input specified at the Audio Auto Polling line of the Setup Source menu. If you don't want the AVR to select an analog audio input for the source, change this setting to Off. The AVR will also select the assigned video source. There are no "audioonly" sources on the AVR 254, other
  • Harman Kardon AVR 254 | Owners Manual - Page 36
    not output multichannel audio via an HDMI connection: • Connect the player's HDMI output and its multichannel analog audio outputs to one of the AVR's HDMI Inputs and to the AVR's 6-/8-Channel Analog Audio Inputs. • Assign the HDMI Input to both the Audio and Video Input from source settings in the
  • Harman Kardon AVR 254 | Owners Manual - Page 37
    INITIAL SETUP Europe and elsewhere. The AVR 254 is capable of detecting PAL video sources and converting them to the NTSC format for display on American televisions. Adjust Lip Sync: Use this adjustment to resynchronize the audio and video signals from a source to eliminate a "lip sync" problem.
  • Harman Kardon AVR 254 | Owners Manual - Page 38
    : If the PROTECT message ever appears in the Message Display, turn off the AVR and unplug it. Check all speaker wires for a possible short. If none is found, bring the unit to an authorized Harman Kardon service center for inspection and repair before using it again. Volume Control The volume may
  • Harman Kardon AVR 254 | Owners Manual - Page 39
    The AVR 254 will switch to the audio and video inputs assigned to the source. The source name will appear in the upper line of the front-panel display. If you retitled the source, the new title will appear. The audio and video inputs assigned to the source will also appear briefly. The surround mode
  • Harman Kardon AVR 254 | Owners Manual - Page 40
    connected and the service activated. Select an antenna module designated for XM Ready audio components. An XM Ready-compatible module uses the special connector on the AVR 254's rear panel that allows you to use the AVR's tuner, including its 40 preset station locations and remote control. Although
  • Harman Kardon AVR 254 | Owners Manual - Page 41
    law. Stereo Jack Input Enjoy the full power and resolution of your Harman Kardon system, including a variety of analog surround modes, while listening to content stored on your portable device. The Stereo Jack is provided on the AVR's rear panel for convenient connection of portable players, such
  • Harman Kardon AVR 254 | Owners Manual - Page 42
    select this mode, use a digital audio input, or turn the Tone Control setting off. 3. Analog Surround Modes: One of the main benefits of a surround receiver such as the AVR 254 is its ability to process 2-channel audio signals to produce multichannel surround sound in a variety of modes, even when
  • Harman Kardon AVR 254 | Owners Manual - Page 43
    EX mode manually. For DTS-ES materials, the incoming bitstream will be displayed as 3/3/.1 ES-ON. When a PCM signal is received, the PCM message, followed by the sampling rate of the signal (32kHz, 44.1kHz, 48kHz or 96kHz), will appear in the front-panel display. In addition, the Speaker/Channel
  • Harman Kardon AVR 254 | Owners Manual - Page 44
    ; you cannot cause any problems for the AVR 254 by doing so. NOTE: To access 6.1- and 7.1-channel modes, such as Dolby Digital EX, DTS-ES, Logic 7 (7.1 modes), DTS Neo:6 (6.1 modes), and 7-channel Stereo, you must enable the surround back channels as explained in the Manual Setup section. You should
  • Harman Kardon AVR 254 | Owners Manual - Page 45
    will vary in appearance from the ones shown here. Step One - Determine Speaker Crossover Without using the EzSet/EQ process, the AVR 254 can't detect how many speakers you've connected to it; nor can it determine their capabilities. For this part of the system setup consult the speaker's technical
  • Harman Kardon AVR 254 | Owners Manual - Page 46
    remote room may enjoy either the same program as in the main room or a different source. The AVR 254's assignable surround back amplifier channels make multizone operation easier than ever, since an external power amplifier is not required. Simply select the Zone 2 option at this line, and connect
  • Harman Kardon AVR 254 | Owners Manual - Page 47
    you are using a Harman Kardon HKTS Series speaker system, select the appropriate numeric crossover frequency for the Left/Right, Center, Surround and Surr Back lines, and the subwoofer will automatically be set to LFE. The Speaker/Channel Indicators on the front panel of the receiver (see Figure 58
  • Harman Kardon AVR 254 | Owners Manual - Page 48
    any time to move the cursor to another line, and the test tone will follow the cursor. When this setting reads MANUAL, the test tone will not move to the next channel until you use the ⁄/¤ Buttons to move it. NOTE: Setting the channel levels while one surround mode is active does not carry over to
  • Harman Kardon AVR 254 | Owners Manual - Page 49
    . Access these settings from the Video Modes menu. Press the Video Modes Button on the front panel or remote, and the screen shown in Figure 66 will appear. The menu may also be accessed from the Setup Source menu by pressing the Info Settings Button and selecting the Video Modes line. screen as
  • Harman Kardon AVR 254 | Owners Manual - Page 50
    on to compensate for authoring errors in the process of converting film programs to video. How to Adjust the Custom Picture Settings Set the Video Mode to Custom to display the picture settings as shown in Figure 68. Figure 68 - Video Modes Custom Processing With a color bar test pattern screen from
  • Harman Kardon AVR 254 | Owners Manual - Page 51
    , and operate any source devices that are connected in daisychain fashion to the AVR 254's Remote IR Output. You may use the main AVR 254 remote control in the remote zone, or you may purchase a second-zone remote by contacting Harman Kardon customer service through our Web site. You may use the
  • Harman Kardon AVR 254 | Owners Manual - Page 52
    when performing Manual Speaker Setup. Select between meters and feet. Language: Select the preferred language for the AVR's on-screen menus and displays: English, French, Spanish or German. HDMI Audio to TV: This setting determines whether audio signals received through any of the HDMI Inputs are
  • Harman Kardon AVR 254 | Owners Manual - Page 53
    , while using the AVR to control surround modes and other audio functions, you may operate the transport controls of your DVD player. Or while using the remote to control video functions on your TV, you may use your cable box to change channels. To program punch-through control while operating any
  • Harman Kardon AVR 254 | Owners Manual - Page 54
    if necessary. If the receiver still does not function correctly after a processor reset, contact an authorized Harman Kardon service center for assistance. Authorized service centers may be located by visiting our Web site at www.harmankardon.com. Memory If the AVR 254 is unplugged or experiences
  • Harman Kardon AVR 254 | Owners Manual - Page 55
    problems • Check speaker wire connections for shorts at receiver and speaker ends • Contact your local Harman Kardon service center No sound from surround or center speakers • Incorrect surround mode • Input is monaural • Incorrect configuration • Stereo or Mono program material • Select a mode
  • Harman Kardon AVR 254 | Owners Manual - Page 56
    settings, worksheets, remote product codes Table A1 - Recommended Source Component Connections Device Type Cable TV, satellite TV, HDTV or other device that delivers television programs DVD Audio/Video, SACD, Blu-ray Disc, HD-DVD player Media Server, including Harman Kardon DMC 1000 TV Video
  • Harman Kardon AVR 254 | Owners Manual - Page 57
    Channel Setting Defaults Audio Input All Digital and 2-Channel Analog Audio Inputs 6-/8-Channel Analog Audio Inputs* Your Settings Left/Right Speakers ON ON Center Speaker ON ON Left/Right Surround Speakers ON ON Left/Right Surround Back Surround Back Speakers Crossover Subwoofer Mode
  • Harman Kardon AVR 254 | Owners Manual - Page 58
    Table A5 - Source Settings Cable/Sat DVD Surround Modes Video Input Audio Input Resolution to Display Adjust Lip Sync Change Name Audio Auto Polling Zone 2 Audio Media Server Radio TV Game AUX Table A6 - Audio Effects Settings Default Cable/Sat DVD Tone Control Off Treble 0dB
  • Harman Kardon AVR 254 | Owners Manual - Page 59
    . Table A9 - Remote Control Codes Source Input Cable/Sat DVD Media Server TV Game AUX Device Type (if changed) Product Code Table A10 - System Settings Feature Front Panel Dimmer Volume Units Volume Default Volume Default Level Unit of Measure Language HDMI Audio to TV OSD Transparency Volume
  • Harman Kardon AVR 254 | Owners Manual - Page 60
    APPENDIX Table A11 - Zone 2 Settings Source Input Status Source Volume Surround Back Amps Device Type (if changed) Off Cable/Sat -25dB Main Room Your Settings Table A12 - Surround Modes Surround Mode Description Dolby Digital Provides up to five separate main audio channels and a dedicated
  • Harman Kardon AVR 254 | Owners Manual - Page 61
    An expansion of Dolby Pro Logic II that adds a surround back channel which may be played through one or two surround back speakers. The Dolby Pro Logic IIx modes may be selected not only with Dolby Digital bitstreams, but thanks to the AVR 254's post-processor, they may also be used with some DTS
  • Harman Kardon AVR 254 | Owners Manual - Page 62
    -resolution discs serves up DTS at twice the bit rate used on DVD-Video discs. • Blu-ray Discs or HD-DVD discs encoded with DTS-HD modes, delivered via HDMI or multichannel analog connection. DTS-HD Master Audio DTS-HD Master Audio technology delivers bit-for-bit reproductions of the studio master
  • Harman Kardon AVR 254 | Owners Manual - Page 63
    analog input signal in that form, bypassing all digital processing • Analog (2-channel) (i.e., surround and bass management). Requires Tone Control setting to " names. The Font Software may be sold as part of a larger software package but no copy of one or more of the Font Software typefaces may be
  • Harman Kardon AVR 254 | Owners Manual - Page 64
    17 18 19 20 21 22 23 24 25 26 27 29 28 30 31 32 33 34 35 36 37 38 39 40 41 Refer to the numbered buttons in Figure 72 when using the Function List. Figure 72 - Remote Control Function List Reference 42 43 44 45 46 47 48 49
  • Harman Kardon AVR 254 | Owners Manual - Page 65
    Input Sel Input Sel Audio Effects Video Modes Surround Modes 1 2 3 4 5 6 7 8 9 0 Activity Back Menu Up Left Enter Right Down Disc Menu Angle Subtitle Audio Zoom AVR Volume + AVR Volume - AVR Mute Previous Pause Next Step Rew 77 Play 3 FF 33 Record Stop AVR Settings Info Settings Setup Sleep TV AVR
  • Harman Kardon AVR 254 | Owners Manual - Page 66
    Left OK Right Down OSD Guide PPV Fav. Ch Music AVR Volume + AVR Volume - AVR Mute Channel Up Channel Down AVR Settings Info Settings TV/CATV Sleep 66 Game AVR Power On AVR Power Off Play Stop Input Sel Input Sel Input Sel Radio Input Sel Input Sel Input Sel Audio Effects Video Modes Surround Modes
  • Harman Kardon AVR 254 | Owners Manual - Page 67
    programming the codes for your components into the remote. Table A14 - Remote Control Product Codes: TV TV Manufacturer/Brand Setup Code Number TV Manufacturer/Brand Setup Code ELECTROHOME EMERSON FUNAI FUTURETECH GE GRUNDIG HALL MARK HARMAN KARDON HITACHI INFINITY INKEL JBL JC PENNEY JENSEN JVC
  • Harman Kardon AVR 254 | Owners Manual - Page 68
    TOSHIBA TOTEVISION VIDEO CONCEPTS VIDTECH WARDS YAMAHA YORK YUPITERU ZENITH ZONDA 063 181 128 045 069 115 123 128 132 069 156 190 191 128 063 129 202 132 160 128 069 128 132 148 123 128 128 045 069 090 122 Table A15 - Remote Control Product Codes: AUX-HDTV TV Manufacturer/Brand Setup Code Number
  • Harman Kardon AVR 254 | Owners Manual - Page 69
    APPENDIX Table A16 - Remote Control Product Codes: AUX-VCR VCR Manufacturer/Brand Setup Code Number AIWA AKAI AMPRO ASA AUDIO DYNAMICS BROKSONIC CANDLE CANON CAPEHART CITIZEN CRAIG DAEWOO DAYTRON DBX DIRECTV DYNATECH EMERSON FISHER FUNAI GE GO VIDEO HARMAN KARDON HITACHI JC PENNEY JENSEN JVC
  • Harman Kardon AVR 254 | Owners Manual - Page 70
    APPENDIX Table A17 - Remote Control Product Codes: AUX-CD CD Manufacturer/Brand Setup Code Number ADCOM AIWA AKAI AUDIO TECHNICA AUDIOACCESS AUDIOFILE BSR CALIFORNIA AUDIO CAPETRONIC CARRERA CARVER CASIO CLARINETTE DENON EMERSON FISHER FRABA FUNAI GE GENEXXA HAITAI HARMAN KARDON HITACHI INKEL JC
  • Harman Kardon AVR 254 | Owners Manual - Page 71
    Table A18 - Remote Control Product Codes: DVD DVD Manufacturer/Brand Setup Code Number APEX DIGITAL DENON GE HARMAN KARDON JVC LG/ Table A19 - Remote Control Product Codes: SAT SAT Manufacturer/Brand Setup Code Number ALPHASTAR ALPHASTAR DBS ALPHASTAR DSR BIRDVIEW CHANNEL MASTER CHAPARRAL CITOH
  • Harman Kardon AVR 254 | Owners Manual - Page 72
    089 190 065 125 211 219 116 Table A22 - Remote Control Product Codes: AUX-MEDIA SERVER Manufacturer/Brand HARMAN KARDON Setup Code Number 002 Table A23 - Remote Control Product Codes: AUX-CBL/SAT RECORDER (PVD) Manufacturer/Brand Setup Code Number DAEWOO ECHOSTAR EXPRESSVU HUGHES HYUNDAI KEEN
  • Harman Kardon AVR 254 | Owners Manual - Page 73
    NOTES 73
  • Harman Kardon AVR 254 | Owners Manual - Page 74
    NOTES 74 74
  • Harman Kardon AVR 254 | Owners Manual - Page 75
    AVR 254 TECHNICAL SPECIFICATIONS Audio Section Stereo Mode Continuous Average Power (FTC) 65 Watts per channel, 20Hz-20kHz, @
  • Harman Kardon AVR 254 | Owners Manual - Page 76
    ® 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2008 Harman International Industries, Incorporated. All rights reserved. Part No. CQX1A1310Z
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
AVR 254
AUDIO/VIDEO RECEIVER
OWNER’S MANUAL