Harman Kardon CP 25 Quick Start Guide

Harman Kardon CP 25 Manual

Harman Kardon CP 25 manual content summary:

  • Harman Kardon CP 25 | Quick Start Guide - Page 1
    ® Thank you for purchasing a Harman Kardon CP 25 Home Theater System. This Quick-Start Guide will help you with a basic system installation. For detailed information on any step in this Guide, please refer to the pages referenced in the Owner's Manual for the AVR 235 that is part of this system. We
  • Harman Kardon CP 25 | Quick Start Guide - Page 2
    ® CP 25 QUICK-START GUIDE LINE LEVEL IN/SUB SUBWOOFER + _ FRONT RIGHT SPEAKER Step 2. Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver and black (-) to
  • Harman Kardon CP 25 | Quick Start Guide - Page 3
    the connections shown in the Device Connection Options chart and Figure 5 on the back of this Guide. Plug all sources into an AC power outlet. Step 7. Connect the AVR to your TV on page 20 of the DVD 22 manual. Step 11. Your system is configured - sit back and enjoy! SPEAKER AND DVD CONNECTIONS
  • Harman Kardon CP 25 | Quick Start Guide - Page 4
    Optical Coax A Harman International Company 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2004 Harman International Industries, cable company to determine whether digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections
  • 1
  • 2
  • 3
  • 4

Thank you for purchasing a Harman Kardon CP 25 Home Theater System.
This Quick-Start Guide will help you with a basic system installation. For
detailed information on any step in this Guide, please refer to the pages
referenced in the Owner’s Manual for the AVR 235 that is part of this system.
We strongly recommend that you read all four Owner’s Manuals for complete
details on how to install, configure and operate the AVR 235, DVD 22, HKTS 7
and HKS 3, as well as for the important safety information they contain. You
should also read the Owner’s Manual for the included RCP 2 system remote.
Figure 1 – Speaker Placement
The colors shown for each speaker correspond to
the matching output terminal connection on the back
of the AVR 235 (see page 7).
FRONT
LEFT
SPEAKER
(White)
SURROUND BACK
LEFT SPEAKER
(Brown)
SURROUND BACK
RIGHT SPEAKER
(Tan)
CENTER
SPEAKER
(Green)
SUBWOOFER
(Purple)
SURROUND
LEFT
SPEAKER
(Blue)
FRONT
RIGHT
SPEAKER
(Red)
SURROUND
RIGHT
SPEAKER
(Gray)
Step 1. Place your speakers in the listening room
(see page 16).
SPEAKER PLACEMENT
CP 25 QUICK-START GUIDE
Connections Color Guide
Audio Connections
Left
Right
Front
Center
Surround
Subwoofer
Surround Back
Digital Audio Connections
Coax
Optical
Video Connections
Composite
S-Video
Match the colored jacks on the AVR 235 to the appropriate
jacks on your source equipment or speakers. The colors are
standardized, but not all equipment or connectors use them.
®