Harman Kardon HKTS 2 Owners Manual
Harman Kardon HKTS 2 Manual
 |
View all Harman Kardon HKTS 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harman Kardon HKTS 2 manual content summary:
- Harman Kardon HKTS 2 | Owners Manual - Page 1
, Inc. Subwoofer Amplifier 100 watts RMS Bass 10" woofer, bass-reflex enclosure Dimensions (H x W x D) 18-1/4" x 15-3/4" x 16-3/4" 464mm x 400mm x 425mm Weight 35.8 lb/16.2kg 250 Crossways Park Drive, Woodbury, New York 11797 1-800/422-8027 (USA only) Fax: 516/682-3523 © 2000 Harman Kardon - Harman Kardon HKTS 2 | Owners Manual - Page 2
HKTS 2 Home-Theater Speaker System OWNER'S MANUAL ® Power for the digital revolution.™ - Harman Kardon HKTS 2 | Owners Manual - Page 3
Options 7 Speaker Connections 7 Speaker-Level Connection Guide 8 Dolby* Pro Logic* (Non-Digital) - Speaker Level 9 Dolby Pro Logic (Non-Digital) - Line Level 9 Dolby Digital or DTS® (or other Digital Surround Mode) Connection 10 Operation 10 Volume 11 Troubleshooting 12 Specifications - Harman Kardon HKTS 2 | Owners Manual - Page 4
, stand, home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions 20) Grounding Conductors (NEC Section 810-21) Electric Service Equipment Ground Clamps Power Service Grounding Electrode System - Harman Kardon HKTS 2 | Owners Manual - Page 5
HKTS 2 is a six-piece home theater speaker system that includes a 10-inch, 100-watt bass-reflex powered subwoofer; four identical 2-way, sealed enclosure satellite speakers speakers, Harman Kardon also offers optional stands, model FSTS 1, which can be ordered through your dealer. Harman Kardon - Harman Kardon HKTS 2 | Owners Manual - Page 6
be angled toward the listeners. Center-Channel Speaker 0-2 ft. 5 - 6 ft. The two surround speakers should be placed slightly behind the listening position subwoofer in that location. Stands are optional. The center-channel speaker should be placed slightly behind the front left and right speakers - Harman Kardon HKTS 2 | Owners Manual - Page 7
MOUNTING OPTIONS Satellites and Surrounds Wall Mounting On shelves. Attach plate to wall. The brackets should to properly and safely wall-mount the speakers. On the wall. Wall brackets included. Slide speaker onto support. On optional stands (FSTS 1). 6 Place speaker and support on wall plate. - Harman Kardon HKTS 2 | Owners Manual - Page 8
SPEAKER CONNECTIONS Speaker-Level Connection Guide Separate and strip the ends of the speaker wire as shown. Speakers and electronics terminals have corresponding (+) and (-) terminals. Most manufacturers of speakers and electronics, including Harman Kardon, use red to denote the (+) terminal and - Harman Kardon HKTS 2 | Owners Manual - Page 9
amplifier's center, and left and right surround-speaker terminals to the corresponding terminals on the back of your center, and left and right surround speakers. Left Front - + Center - + L Speaker-Level Output R Subwoofer High Level L Speaker-Level Input R Right Front - + Left Front - Harman Kardon HKTS 2 | Owners Manual - Page 10
LFE OUT LINE LEVEL INPUT or LFE output on your receiver or amplifier. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier. SUB Make sure that you have configured your surround-sound processor for "Subwoofer On." The front left, front right, center and rear - Harman Kardon HKTS 2 | Owners Manual - Page 11
to the "•" (On) position to use the subwoofer. The HKTS 2 subwoofer will automatically turn itself on or go into SUBWOOFER LEVEL MIN MAX O RED: STAND BY - - GREEN: ON ON n AUTO n LR LINE LEVEL INPUT SUB OUT IN + R HIGH - LEVEL - L + + IMPORTANT: CONNECT STRIPED WIRE TO RED ( ) SPEAKER - Harman Kardon HKTS 2 | Owners Manual - Page 12
so that the subwoofer and LFE output are enabled. If there is no sound from the surround speakers: • Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured. • Review proper operation
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
250 Crossways Park Drive,Woodbury, New York 11797
1-800/422-8027 (USA only)
Fax: 516/682-3523
©
2000 Harman Kardon, Incorporated
Printed 9/00
Part No. ai5083
HKTS 2 System
Frequency Response
35Hz – 20kHz (–6dB)
Satellites
Recommended Power
10 – 50 watts
Impedance
8 ohms nominal
Sensitivity
86dB @ 1 watt/1 meter
Tweeter
One 1/2" dome, video-shielded
Midrange
One 3" driver, video-shielded
Dimensions (H x W x D)
4-5/8" x 3-1/8" x 3-3/4"
117mm x 79mm x 93mm
Weight
1.1 lb/0.5kg
Center
Recommended Power
10 – 50 watts
Impedance
8 ohms nominal
Sensitivity
86dB @ 1 watt/1 meter
Tweeter
One 1/2" dome, video-shielded
Midrange
Dual 3" drivers, video-shielded
Dimensions (H x W x D)
3-1/2" x 7-5/8" x 3-3/4"
89mm x 194mm x 93mm
Weight
1.89 lb/0.86kg
Subwoofer
Amplifier
100 watts RMS
Bass
10" woofer, bass-reflex enclosure
Dimensions (H x W x D)
18-1/4" x 15-3/4" x 16-3/4"
464mm x 400mm x 425mm
Weight
35.8 lb/16.2kg
Refinements may be made on occasion to existing products without notice,
but will always meet or exceed original specifications unless otherwise stated.
* Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
SPECIFICATIONS