Harman Kardon HKTS 9 User Guide
Harman Kardon HKTS 9 Manual
 |
View all Harman Kardon HKTS 9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harman Kardon HKTS 9 manual content summary:
- Harman Kardon HKTS 9 | User Guide - Page 1
User Guide English HKTS 9/16 Home Theater Speaker System - Harman Kardon HKTS 9 | User Guide - Page 2
9/16 Home-Theater System Owner's Manual Table of Contents Introduction 3 Description and Features 3 HKTS200SUB Subwoofer Rear-Panel Connections 4 Speaker Placement 5 Mounting Options 5 Speaker Connections 6 Operation 10 Troubleshooting 10 Specifications 11 Important Safety Instructions - Harman Kardon HKTS 9 | User Guide - Page 3
-honored circuit designs, the HKTS 9/16 is a perfect complement to a Harman Kardon receiver, or any home theater system. One center-channel speaker One powered subwoofer Four satellite speakers: a left front speaker, a right front speaker, and two rear surround-sound speakers, with color-keyed - Harman Kardon HKTS 9 | User Guide - Page 4
or preamp/processor does not have digital surround sound decoding or a subwoofer output that Connectors. Repeat with the other Y-adapter, preamp channel, main amp input and HKTS200SUB Line-Level L/R In and verified all subwoofer and speaker connections described in this manual, plug this cord into an - Harman Kardon HKTS 9 | User Guide - Page 5
Placement Color-Coding System The HKTS 9/16 use the channel color-coding system established by the CEA to make setting up your home theater speaker system as easy as possible. Your system includes a set of colored stickers that may be placed near the speaker terminals of each of the four satellite - Harman Kardon HKTS 9 | User Guide - Page 6
would not be covered by your warranty. Newer Harman Kardon receivers conform to the CEA standard and therefore use a color other than red or black for the (+) terminal to indicate some speaker positions: e.g., surround left. Although the HKTS 9/16 system has red and black collars on the individual - Harman Kardon HKTS 9 | User Guide - Page 7
subwoofer output does not have low-pass filtering, follow the instructions in Connecting the Subwoofer to a Receiver or Preamp/Processor With Subwoofer ON, and set the front left, front right, center, and surround speakers to Small. After you have made and verified all connections, plug the - Harman Kardon HKTS 9 | User Guide - Page 8
receiver or amplifier. In your receiver or preamp/processor's setup menu, configure it for Subwoofer ON, and set the front left, front right, center, and surround speakers to Small. After you have made and verified all connections, plug the HKTS200SUB's AC Power Cord 8 into an active AC outlet. 8 - Harman Kardon HKTS 9 | User Guide - Page 9
ENGLISH +- +- +FRON-T SURROUND RIGHT Receiver +CENT-ER LEFT +- LFE SUB TRIGGER OUTPUT OUT Subwoofer Trigger Cable (Black Ends) the subwoofer ON/OFF trigger cable to the Remote Control Output (IR Out) of your home cinema system or surround receiver. This could lead to malfunction. 9 - Harman Kardon HKTS 9 | User Guide - Page 10
15 minutes. The HKTS 90 SUB's LED will will be away from home for an extended period channel. •• Check your receiver/amplifier's speaker setup procedure to make sure that he speaker surround speakers are connected properly. •• Make sure the speaker wires are not frayed, cut or punctured. •• Review - Harman Kardon HKTS 9 | User Guide - Page 11
-1/2" x 10-1/2") Weight 9.0 kg (19.8 lb) HKTS 16 System Frequency Response 45Hz - 20kHz (-6dB) SAT-TS11 Satellites Harman International Industries, Incorporated. All rights reserved. Features, specifications and appearance are subject to change without notice. Harman Kardon is a trademark of Harman - Harman Kardon HKTS 9 | User Guide - Page 12
Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only) www.harmankardon.com Made in P.R.C. Part No. 444541-001
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
HKTS 9/16
User Guide
English
Home Theater Speaker System