Harman Kardon SIG2.1 Owners Manual
Harman Kardon SIG2.1 Manual
 |
View all Harman Kardon SIG2.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harman Kardon SIG2.1 manual content summary:
- Harman Kardon SIG2.1 | Owners Manual - Page 1
2.1 Multichannel Amplifier Owner's Manual - Harman Kardon SIG2.1 | Owners Manual - Page 2
Manual Signature 2.1 Multichannel Amplifier Table of Contents Introduction 1 Safety Information 2-3 Unpacking and Installation 3 Front and Rear Panels 4 Installation and Connections 5-6 Operation 7 Service Information 8 Troubleshooting (servicing) instructions in Harman Kardon, Incorporated - Harman Kardon SIG2.1 | Owners Manual - Page 3
along with outstanding industrial design that matches other Harman Kardon Signature Series products and complements any interior design. In order to fully enjoy the performance of your amplifier, please take a few minutes to read this owner's manual. It contains important information that will help - Harman Kardon SIG2.1 | Owners Manual - Page 4
Use Your new Signature Series 2.1 amplifier Do Not Open the Cabinet There are no user-serviceable components inside this product. Opening the cabinet may present shelf, be certain that the shelf and any mounting hardware can support the amplifier's weight. s Make certain that proper space is - Harman Kardon SIG2.1 | Owners Manual - Page 5
Unpacking and Installation Signature 2.1 Cleaning When the unit gets dirty, wipe it with a clean, soft on all sides, as well as on the top and bottom. Do not place CDs, record jackets, owner's manuals or other paper on top of, or beneath the unit, or in between multiple amplifiers in a stack. This - Harman Kardon SIG2.1 | Owners Manual - Page 6
manual operation, amber in the standby mode, and flashing green during warm-up. If the indicator flashes and alternates between red and amber, the 2.1 is in the protect mode, indicating a problem in the unit or connections to the speakers. Rear Panel Connections 1 CHANNEL of the Signature 2.1, it - Harman Kardon SIG2.1 | Owners Manual - Page 7
unplugged from AC power sources. Remote Turn-On with the Signature Series 2.0 and Compatible Harman Kardon Products Connect one end of the accessory cable supplied with . Do not connect the same input or speaker to more than one channel. To ensure that the high-quality signals produced by the 2.1 are - Harman Kardon SIG2.1 | Owners Manual - Page 8
Signature A pair of binding posts is provided for each channel output. These posts will accept bare wire or banana to the banana plug following the plug manufacturer's instructions, simply insert the banana plug into the hole speaker terminals, or the speaker's manual to verify polarity. If you do - Harman Kardon SIG2.1 | Owners Manual - Page 9
used in standalone operation you should follow the instructions below for Manual Operation. When the 2.1 is connected to another Signature Series product or to another compatible device, follow the instructions for Automatic Operation. Operation of the Signature Series 2.1 is simple. There are no - Harman Kardon SIG2.1 | Owners Manual - Page 10
in this manual, you should enjoy many years of trouble-free operation and high-quality listening enjoyment. The 2.1 does not contain any user-serviceable parts. If you suspect a problem that may require service assistance, contact your dealer, installer or an authorized Harman Kardon service depot - Harman Kardon SIG2.1 | Owners Manual - Page 11
Technical Specifications Signature 2.1 Multichannel Amplifier Specifications Power Output: High-Current x 100 watts @ 8 ohms 20Hz - 20kHz, - Harman Kardon SIG2.1 | Owners Manual - Page 12
Printed in the United States Part #1111-HKSIG21 HA160-0003-A
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
2.1 Multichannel Amplifier
Owner’s Manual