Hayward E-Command 4 Model: ALL MODELS Installation - Page 17
Configuration Setup - configuration menu locked
View all Hayward E-Command 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4. Configuration Setup After plumbing and wiring are complete, the ECOMMAND 4 MUST BE CONFIGURED before attempting to operate. Configuration information is entered at the keypad and "tells" the ECOMMAND 4 what equipment is connected and how each should be controlled. Accessing the Configuration Menus Configuring the ECOMMAND 4 requires that you navigate through the Configuration Menu and input various information. For more detailed information about using the ECOMMAND 4 menu system, refer to the Operation Manual. To access the Configuration Menu Configuration Menu-Locked Configuration Menu-Unlocked Press repeatedly until "Configuration Menu" is displayed Press BOTH buttons SIMULTANEOUSLY for 5 seconds to unlock Move to configuration menu items NOTE: The configuration menu automatically "locks" after 2 minutes of no buttons being pressed to prevent unauthorized people from changing the control logic inadvertently and possibly damaging the pool equipment or causing a "call back" to fix the configuration. Configuration Menu Items Each item needs to be programmed and may contain additional sub-menu items. Refer to the following pages for information on programming. Chlor. Config. + to view/change Ext. Chlorinator Enabled Display Salt Push to access Chlorinator option Move to next configuration menu Toggle between External Chlorinator Enabled and Disabled (default) Move to next menu item Toggle between Display Salt (default) and Minerals Move to previous/next configuration menu Chlorinator If the optional external chlorinator is enabled (requires the use of a Goldline Aqua Rite or Hayward Swimpure chlorinator), the ECOMMAND 4 will automatically chlorinate both the pool and spa according to the desired output setting (see Settings Menu in the Operation manual). If disabled (default), all displays relating to the chlorinator will be suppressed. When the chlorinator is enabled, the ECOMMAND 4 will automatically detect and control any Aqua Rite/Swimpure(s) that is installed in the system (see page 13). Display Allows for the display of salt (default) or mineral values. 14