Hayward E-Command 4 Model: ALL MODELS Operation - Page 10
The ECOMMAND 4 will
View all Hayward E-Command 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Pool Solar 88°F Adjust the desired pool temperature (Off, 65°F, 66°F, ...103°F, 104°F, Off) Move to previous/next menu item The pool solar setting will only appear if the system has been setup for "pool only" or "pool and spa" operation and the solar control is enabled. The solar system will turn on whenever the pool/spa valves are in the "pool only" or "spa spillover" position and the filter pump is running and the pool water temperature is less than the desired temperature setting and solar heat is available. Super Chlorinate Off Turn super chlorinate on or off Move to previous/next menu item This display only appears if the external chlorinator is enabled. When you have an unusually high bather load, a large amount of rain, a cloudy water condition, or any other condition that requires a large amount of chlorine to be introduced to the pool, activate the ECOMMAND 4 Super Chlorinate function. The ECOMMAND 4 will turn on the filter pump, set the pool/spa valves to the correct position, and set the external chlorine generator to maximum output. The super chlorinate function will continue for the programmed number of hours (see Timers/Super Chlorinate Hours below) overriding the normal filter pump timeclock settings. At the end of the super chlorinate period, the pool will return to normal operation. If you manually turn off the filter pump (using the FILTER button on any display/keypad), the super chlorinate function terminates. When you turn the filter pump back on, super chlorinate will resume for the balance of the programmed number of hours. Spa Chlorinator 3% Adjust the desired chlorinator output for spa (0,1,2,3...9,10,15,20...95,100%) Move to previous/next menu item This setting will appear only if the system has been setup for external chlorinator and "spa only" or "pool and spa". It will determine the external chlorinator output when the system is operating in spa-only mode. The actual amount of chlorine introduced into the spa is determined by this setting, the amount of time the pool operates in spa-only mode, the water temperature, and the amount of salt in the water. If the filter pump is running due to the freeze protection feature, then the chlorinator will not operate during this time. Pool Chlorinator 60% Adjust the desired chlorinator output for pool (0,1,2,3...9,10,15,20...95,100%) Move to previous/next menu item This setting will appear only if the system has been setup for external chlorinator and "pool only" or "pool and spa". It will determine the chlorinator output when the system is operating in pool only or spa spillover modes. The actual amount of chlorine introduced into the pool is determined by this setting, the amount of time the filter pump is running, the water temperature, and the amount of salt in the water. If the filter pump is running due to the freeze protection feature, then the chlorinator will not operate during this time. Spa High Speed 100% Adjust the desired high speed for variable speed operation Move to previous/next menu item This setting will appear if "pool only" is not selected and variable speed filter pump is enabled. This setting determines the speed of the pump during high speed spa operation. This value can be set from 20% to "Highest Speed" in 5% increments. "Highest Speed" is default. 7