Hayward Easy-Clear™ C5501575 Series Easy Clear
Hayward Easy-Clear™ Manual
 |
View all Hayward Easy-Clear™ manuals
Add to My Manuals
Save this manual to your list of manuals |
Hayward Easy-Clear™ manual content summary:
- Hayward Easy-Clear™ | C5501575 Series Easy Clear - Page 1
to service the cartridge element. • Built-in check valve prevents accidental loss of pool water when cartridge is being removed for cleaning. • Unique safety latch prevents overtightening of the cover and secures the filter from unwanted entry. • Cartridge element is uniquely designed, by Hayward - Hayward Easy-Clear™ | C5501575 Series Easy Clear - Page 2
. A manual air vent valve is furnished to aid in bleeding off unwanted air when starting the filter. 10. All electrical connections should be made in accordance with local codes. 11. Check for joint leaks before operating the system. 12. Refer to pump instruction booklet for pump information. PARTS - Hayward Easy-Clear™ | C5501575 Series Easy Clear - Page 3
below desired rate, clean or replace the filter cartridge. CLEAN/REPLACE CARTRIDGE Removing Cartridge Element 1. Shut off the pump. 2. If filter is located below water level, close valves or block off discharge line to prevent backflow of water from the pool. 3. Unscrew and remove drain plug - Hayward Easy-Clear™ | C5501575 Series Easy Clear - Page 4
and can then be removed by the filter. Live algae, on the other hand, multiplies so fast that the filter cannot keep up with its growth rate. dissipate Add Stabilizer Dilution-partially drain & refill with pool water that has not been treated with Cyanuric Acid © 1998 Hayward Printed in U.S.A.
-
1 -
2 -
3 -
4
 |
 |
SYSTEM LOCATION
Though the system is designed for outdoor use, it is
advisable to protect electrical components from the
weather.
Select a well-drained area, one that will
not
flood when it rains.
For best pump performance, position the system below
the swimming pool water line.
If the system must be
located above the pool water line, it can be raised as
high as 2 feet (610 mm) above the water without
affecting the pump’s efficiency.
NOTE:
NSPI-4 Article V, standard for above-ground and
on-ground pools, advises that components such as the
filtration system, pumps and heater be positioned so as
to prevent their being used as a means of access to the
pool by young children.
Set the mounting platform level.
Keep the cover lock,
filter bump handle, drain outlet and pressure gauge
accessible for convenient operation.
Position the system so the filter tank can be drained by
gravity.
PLUMBING INSTALLATION
Use 1-1/4
”
or 1-1/2
”
I.D. flexible plastic pipe, or hose,
joined with insert fittings and stainless steel clamps.
All plumbing connections on the system are 1-1/2
”
N.P.T.
When making connections, use plastic male-end
adapters.
Apply three turns of Teflon tape or plastic
pipe sealant to the male threads.
Screw the fitting into
the threads hand tight; then, using a wrench, tighten
one more full turn.
Additional tightening is unnecessary
and could result in damaged components.
Refer to the diagrams for suggested valving.
Ball-type
valves are recommened where needed.
IS-400-1540-98
Hayward’s Easy-Clear filters are high performance above-ground swimming pool filters with a
filtration rating up to 4,200 gallons (16 Kl) per hour.
Manufactured from durable, corrosion-proof
materials, Easy-Clear has been designed to provide years of trouble-free operation.
FEATURES
Easy-Lok
™
lid access design provides simple
entry to service the cartridge element.
Built-in check valve prevents accidental loss
of pool water when cartridge is being
removed for cleaning.
Unique safety latch prevents overtightening
of the cover and secures the filter from
unwanted entry.
Cartridge element is uniquely designed, by
Hayward,
of
high
quality,
reinforced
polyester with a molded center core for easy
cleaning, high flow and long life.
Union connection allows pump or filter to be
removed quickly and easily for servicing the
system and winterizing.
•
•
•
•
•
1.
2.
3.
1.
2.
3.
4.
OWNER’S GUIDE