Hayward Perflex Perflex EC50C90 Series

Hayward Perflex Manual

Hayward Perflex manual content summary:

  • Hayward Perflex | Perflex EC50C90 Series - Page 1
    ISEC50C90 Rev. A OWNER'S MANUAL INSTALLATION, OPERATION, & PARTS Perflex Extended Cycle Filtration System EC50C90 Series The Hayward® Perflex™ Filtration System is specifically designed for the demanding requirements of today's above-ground swimming pools. The advanced design reduces maintenance
  • Hayward Perflex | Perflex EC50C90 Series - Page 2
    Perflex™ Extended Cycle Filtration System__________ PRODUCT REGISTRATION (Retain For Your Records) ________ DATE OF INSTALLATION INITIAL PRESSURE GAUGE READING (CLEAN FILTER PUMP MODEL HORSEPOWER FILTER MODEL SERIAL NUMBER IMPORTANT SAFETY INSTRUCTIONS When installing and using this
  • Hayward Perflex | Perflex EC50C90 Series - Page 3
    all applicable local building codes. Replace damaged, broken, cracked, missing, or unsecured drain covers and suction outlets immediately. WARNING - Hazardous Pressure. Pumps, filters, and other equipment/components of a swimming pool filtration system operate under pressure. Incorrectly installed
  • Hayward Perflex | Perflex EC50C90 Series - Page 4
    -ground swimming pool filters. Instructions in this manual MUST be followed precisely. The Hayward Perflex System is a high performance swimming pool filter system having an output rating of 3,000 gallons (11 KL) per hour. Manufactured from durable, corrosion-proof materials, the filter and pump
  • Hayward Perflex | Perflex EC50C90 Series - Page 5
    For best pump performance, the system MUST be located below the pool water line (See Figure to the right). Install the system on a firm, level base or pad to meet all local and national codes. The field supplied base or pad must be level and vibration-free. Keep the filter bump handle, drain outlet
  • Hayward Perflex | Perflex EC50C90 Series - Page 6
    Perflex™ Extended Cycle Filtration System Prior to Start-Up Important Safety Instructions - Read and follow all instructions When installing and using this equipment, basic safety precautions MUST always be followed. WARNING - Pump and Filter System Operates Under High Pressure. Failure to
  • Hayward Perflex | Perflex EC50C90 Series - Page 7
    , regenerate the filter. Regeneration (Extending the Cycle) Stop the pump. Move the bump handle down slowly, then up briskly. Repeat 3 times. Restart the pump and filtration will resume at near the original flow and pressure. After each regeneration, and until the filter is cleaned, there may
  • Hayward Perflex | Perflex EC50C90 Series - Page 8
    to removal, cycle the filter as described under "Cleaning". Service & Repairs Consult your local authorized Hayward-Perflex dealer or service center. No returns may be made directly to the factory without the expressed written authorization of Hayward Pool Products, Inc. Pool Chemistry Guidelines
  • Hayward Perflex | Perflex EC50C90 Series - Page 9
    Perflex™ Extended Cycle Filtration System Troubleshooting Problem Running at high pressures. Drop off of return flow. Short cycles. Probable Cause D.E. coated with normal accumulation of pool dirt, algae, etc. Overcharge of D.E. Restriction in return line caused by small eyeball fitting. Bump
  • Hayward Perflex | Perflex EC50C90 Series - Page 10
    Perflex™ Extended Cycle Filtration System Troubleshooting (cont.) Problem Short cycles - even after proper Bump-Drain-Recharge. Probable Cause Contaminated (clogged) Flex-Tube braids caused by: 1. Natural accumulation of chemical deposits (accelerated if chemicals are fed through skimmer). 2.
  • Hayward Perflex | Perflex EC50C90 Series - Page 11
    Perflex™ Extended Cycle Filtration System Replacement Parts Parts Listing Ref. No. Part No. Description No. Req'd 1 ECX5000D Bump Mechanism Cover 1 2 ECX1322A Vent Valve with O-Ring 1 3 ECX5000BP Filter Head with Vent Valve 1 4 ECX5000C Clamp Assembly with Spring 1 5 ECX100Z9
  • Hayward Perflex | Perflex EC50C90 Series - Page 12
    Perflex™ Extended Cycle Filtration System HAYWARD® LIMITED WARRANTY This filter system was inspected before shipment from our plant. To original purchasers of this filter system, Hayward Pool Products, Inc., 620 Division Street, Elizabeth, New Jersey, warrants its products free from defects in
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

ISEC50C90
Rev. A
____________________________________________________________________________________
OWNER’S MANUAL
INSTALLATION, OPERATION, & PARTS
Perflex
Extended Cycle
Filtration System
EC50C90 Series
The Hayward
®
Perflex™ Filtration System is specifically designed for the demanding requirements of today’s above-ground
swimming pools.
The advanced design reduces maintenance requirements while providing superior performance.
To prevent potential injury and to avoid unnecessary service calls, read this manual carefully and completely.
CAUTION
We highly recommend a qualified professional install and service this product.
WARNING
This manual contains important safety information that must be furnished to the end
user of this product.
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY.
SAVE THIS INSTRUCTION MANUAL
HAYWARD POOL PRODUCTS, INC.
Corporate Headquarters:
U.S.A:
620 Division Street
1 Hayward Industrial Drive
2935 Sidco Drive
2875 Pomona Blvd.
Elizabeth, NJ 07207
Clemmons, NC 27012
Nashville, TN 37204
Pomona, CA 91768
Canada:
Europe:
2880 Plymouth Drive
Parc Industriel de la plaine de l'Ain
Oakville, Ontario L6H 5R4
Allêe des Chênes
01150 Saint Vulbas
France