Hayward S200 Series S200 Sand Filter

Your

Hayward S200 high-rate sand filter is a high

performance, totally corrosion-proof filter that blends

superior flow characteristics and features with ease of

operation. It represents the very latest in high-rate sand

filter technology. It is virtually foolproof in design and

operation and when installed, operated and maintained

according to instructions, your filter will produce clear,

sparkling water with only the least attention and care.

HOW IT WORKS

The S200 filter uses special filter sand to remove dirt

particles from the water. Filter sand is loaded into the filter

tank and functions as the permanent dirt removing media.

The pool water, which contains suspended dirt particles, is

pumped through your piping system and is automatically

directed by the patented filter control valve to the top of the

filter tank. As the pool water is pumped through the filter

sand, dirt particles are trapped by the sand bed, and filtered

out. The cleaned pool water is returned from the bottom of

the filter tank, through the control valve and back to the pool

through the piping system. This entire sequence is

continuous

and

automatic

and

provides

for

total

recirculation of pool water through your filter and piping

system.

After a period of time, the accumulated dirt in the filter

causes a resistance to flow, and the flow diminishes. This

means it is time to clean (backwash) your filter. With the

control valve in the backwash position, the water flow is

automatically reversed through the filter so that it is directed

to the bottom of the tank, up through the sand, flushing the

previously trapped dirt and debris out the waste line. Once

the filter is backwashed (cleaned) of dirt, the control valve is

manually resequenced to Rinse, and then Filter, to resume

normal filtering.

INSTALLATION

Only simple tools (screwdriver and wrenches), plus pipe

sealant for plastic adapters, are required to install and/or

service the S200 filter.

The filter system should be placed on a

level

concrete

slab, very firm ground, or equivalent, as recommended

by your pool dealer. Position the filter so that the piping

connections, control valve and winter drain are

convenient and accessible for operation, service and

winterizing.

Assemble Vari-Flo filter control valve to filter. Align the

two (2) valve pipe connections, with O-rings in place,

with the two openings in the side of the filter tank and

press in firmly. Secure the assembly to the tank

connections with the two bulkhead locknuts.

Do not overtighten.

IS200-98

1.

2.

(91 cm)

PUMP MOUNTIING

BASE (IS200PAK1)

(60 cm)

Hayward S200 Series S200 Sand Filter

Hayward S200 Series Manual

Hayward S200 Series manual content summary: