HP 1022n HP LaserJet 1022nw - Wireless Getting Started Guide - Page 24
Ready, Model, HP LaserJet 1022nw, Printer Connection, Connected via wireless - ip address
UPC - 829160711102
View all HP 1022n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3. Turn the printer on. NOTE The green light on the network port illuminates. 4. Print a configuration page to obtain additional information about the network configuration settings, such as the IP address. When the printer is in the Ready state, press and hold the GO button until the Ready light starts blinking. If the IP address on the configuration page is 0.0.0.0, then wait a few minutes and then print the configuration page again. Do this until the IP address is not 0.0.0.0. The printer will have an IP address based on your personal network configuration. For example, the IP address might look like 192.168.x.y, where the x and y can be any numbers between 0 and 255. 5. Insert the CD into a computer that is linked to the network. Follow the on-screen installation prompts. In the Model dialog box, select the HP LaserJet 1022nw. In the Printer Connection dialog box, select the Connected via wireless option. 6. After the installation is complete, make sure that the network cable is disconnected. 18 Chapter 2 Setting up the printer ENWW