HP 1050c Service Manual - Page 102
Replacing The Tubes System. - designjet cartridges and printheads
View all HP 1050c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Service Tests and Utilities WARNING NOTE 1. Tubes Purge The purpose of this Service Utility is to Prime the Tubes when a new Tubes System has been installed. ALWAYS PERFORM THE TUBES PURGE AFTER REPLACING THE TUBES SYSTEM. Make sure that there is enough ink remaining in the Ink Cartridges before starting to prime the tubes. If there is not enough ink remaining, you will get a warning message. Perform the Tubes Purge as follows: 1 In the Service Utilities submenu, scroll to "1. Tubes Purge" and press Enter. Service Utilities 1. Tubes Purge 2. Release Info 3. Set Asian Fonts 4. Printer Model Type 5. Overdrive Cleaning Top Back ↑ Make Selection ↓ Enter Press Enter 2 The Printer will begin to startup and in order to continue, press Enter. INK STARTUP Printer startup Top Back ↑ Press Enter to Continue ↓ Enter Press Enter 3 The following message will be displayed on the front panel while the printer accesses the printheads. INK STARTUP Accessing Printheads 4-28 HP DesignJets 1050C and 1055CM Printers Service Manual