HP 1050c Service Manual - Page 128
To check if the Calibration was completed correctly, print
View all HP 1050c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Service Calibrations 3 If you selected to continue, then the following message appears on the front panel if media is not loaded. You must load Media in to the Printer to continue. Please, load paper to perform this operation and try again Press ENTER to continue Top Back ↑ ↓ Enter Press Enter 4 The Printer will start to print the calibration pattern and the following messages will be displayed on the front panel: PerforminAgCsCeUrRvAiCcYe position caClibarliabtrioanti.ng Please wait. Performing drop detector calibration. Please wait. Performing primer calibration. Please wait. PerforminAgCpCUlaRtAeCnY distance caCliablriabtriaotnin. g Please wait. 5 Once the service station calibration is completed, the following message will be displayed on the front panel: Service station calibration finished. Press ENTER to continue Top Back ↑ ↓ Enter Press Enter 6 To check if the Calibration was completed correctly, print the Service Configuration Print (see Page 1-19) and check that the calibrations are done and are within the stated limits. Check that the Calibrations are done and within the limits 5-12 HP DesignJets 1050C and 1055CM Printers Service Manual