HP 1050c Service Manual - Page 145
now hear a scraping sound: this sound indicates that you need to raise
View all HP 1050c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Service Calibrations 8 Lower the Carriage Assembly slightly, by turning the T9 screw shown below anti-clockwise and then check for a scraping sound again as shown previously in step 7. 9 On moving the Carriage Assembly along the length of the printer you should now hear a scraping sound: this sound indicates that you need to raise the Carriage Assembly (if there is no sound repeat step 8). HP DesignJets 1050C and 1055CM Printers Service Manual 5-29
Service Calibrations
5-29
HP DesignJets 1050C and 1055CM Printers Service Manual
8
Lower the Carriage Assembly slightly, by turning the T9 screw shown below
anti-clockwise and then check for a scraping sound again as shown previously
in step 7.
9
On moving the Carriage Assembly along the length of the printer you should
now hear a scraping sound: this sound indicates that you need to raise the
Carriage Assembly (if there is no sound repeat step 8).